• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.5
• /
• pp.69-74
• /
• 1985

In this paper five-order Butterworth Low pass active RC filter is designed by using FDNR (Frequency Dependent Ncgative Resistor) Method from LC ladder filter having the lowest sensitivity. In process of Transformation to SCF (Switched Capacitor Filter) from active RC filter, Bilinear Z Transfomation method is utilized. By the design of SCF using the bilinear Z transform method the problem of aliasing can be avoided, but the frequency distortion is generated. The transformation from analog filter to digital filter is not equal in the region of the cut off frequency caused by this effect. Avoiding the problem of this effect, we use prewarping method. The result shows that the prewarped SCF makes more remarkable improvement in the frequency distortion than SCF which is transformed by using bilinear Z transform.

• Journal of Biomedical Engineering Research
• /
• v.20 no.3
• /
• pp.291-297
• /
• 1999

Source consislency filtering (SCF) is very effective at removing nOIse when only one or a few leads among multi-lead ECG signals are contaminated. When the noise at one or only a few leads are statistically uncorrelated with signals at other leads, SCF seleclIvely removes the noise with a neglIgIble amount of distortion in the original signal waveform. In order to enhance the understanding of this new method, we describe the lheory and implementational details of SCF in this paper. Numerical implementation and test results of SCF on a multi-lead ECG dalabase show that SCF is a new kind of adaptive filters utilizmg spatial as well as temporal information in multi-c.hannel signals origmatmg from a single source. We also describe the limitations and future improvements in using SCF.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 2003.11a
• /
• pp.76-76
• /
• 2003

Mast cells accumulation can be causally related with several allergic inflammations. Previous work has demonstrated that glucocorticoids decreased tissue mast cell number and stem cell factor (SCF)-induced migration of mast cells required p38 mitogen-activated protein kinase (MAPK) activation. In the present study, we investigated the effects of dexamethasone on SCF-induced migration of rat peritoneal mast cells (RPMCs). SCF significantly induced migration of RPMCs at 4 h. Dexamethasone dose-dependently inhibited SCF-induced migration of RPMCs (about 90.1% at 100 nM, P<0.05). MAPK p38 inhibitor, SB203580 (20 ${\mu}$M) also inhibited the SCF-induced migration. The ability of SCF to enhance morphological alteration and F -actin formation was also abolished by treatment of dexamethasone. Dexamethasone inhibited SCF-induced p38 MAPK activation to near basal level and induced the MKP-1 expression. In addition, SCF-induced inflammatory cytokine production was significantly inhibited by treatment of dexamethasone or SB203580 (p<0.01). Our results show that dexamethasone potently regulates SCF -induced migration, p38 MAPK activation and inflammatory cytokine production through expression of MKP-l protein in RPMCs. Such modulation may have functional consequences during dexamethasone treatment, especially mast cell-mediated allergic inflammation disorders.

• Journal of Embryo Transfer
• /
• v.26 no.3
• /
• pp.171-180
• /
• 2011

In this study I report that in vitro development rates of bovine nuclear transfer embryos activated either with boar sperm cytosolic factor (SCF) or with ionomycin followed by cycloheximide (CHX) and subsequent in vivo developmental rates after embryo transfer are related to blastocyst quality as evaluated by apoptosis analysis. SCF was extracted from porcine semen then purified for post-activation injection after nuclear transfer. The optimal timing for SCF injection was determined to be at least 22 h post-IVM for parthenogenetic activation of bovine oocyies. A total of 364 oocytes were successfully enucleated and 268 (73.6%) fused and were injected with SCF. The survival rate of fused and injected embryos was 109/113 (96.5%) after 2 h. The cleavage rates of nuclear transfer embryos after 3 d of culture in the ionomycin/CHX treated group were significantly higher than those of the SCF-activated group (93.3% vs 81.7%, p<0.01, respectively). However, at 7 d and 9 d there was no significant difference between the total developmental rates to blastocyst for either treatment group. Total blastocyst cell numbers were also not significantly different between the two activation treatments (ionomycin/CHX: 149.5${\pm}$7.7 vs. SCF: 139.3${\pm}$4.4 cells). In contrast, the apoptotic levels in the SCF blastocysts were higher than those produced after the chemical treatment (28.2${\pm}$5.1% vs. 8.8${\pm}$0.6%, respectively). A total of 18 expanded or hatching blastocysts was transferred to nine synchronized recipients in each activation group; 5/9 (55.5%) and 2/9 (22.2%) were pregnant at 40 d in the ionomycin/CHX treatment and SCF activated group, respectively. However, only one went to term in the ionomycin/CHX treatment while none of the pregnancies from the SCF group were maintained by 90 d. In conclusion, these results suggest that SCF derived from different species is a limited activator to be used for activation after bovine nuclear transfer in lieu of a chemical activation protocol.

• Reproductive and Developmental Biology
• /
• v.35 no.3
• /
• pp.319-327
• /
• 2011

This study investigated whether the addition of porcine sperm cytosolic factor (SCF) at fusion/activation affects in vitro development of porcine parthenogenetic(PA) and nuclear transfer (NT) embryos. To determine the optimum concentration of SCF, control group of oocytes was activated with 0.3M mannitol (1.0 mM $CaCl_2{\cdot}2H_2O$), other three groups of oocytes were parthenogentically activated with the fusion medium (0.1mM $CaCl_2{\cdot}2H_2O$) supplemented with 100, 200 or 300 ${\mu}$g/ml SCF, respectively. Matured oocytes were activated with two electric pulses (DC) of 1.2 kv/cm for 30 ${\mu}$sec. The activated embryos were cultured in PZM-3 under 5% $CO_2$ in air at $38.5^{\circ}C$ for 6 days. Oocytes activated in the presence of SCF showed a significantly higher blastocyst rate than control (p<0.05). Apoptosis rate was significantly lower in 100 ${\mu}$g/ml SCF group than other groups (p<0.05). Cdc2 kinase activity in control and SCF treatment group of oocytes was determined using MESACUP cdc2 kinase assay kit at 1, 5, 10, 15, 30, 45 and 60 min after activation. Cdc2 kinase activity was significantly decreased (p<0.05) in SCF group than MII oocytes or control within 5 min. For NT embryo production, reconstructed oocytes were fused in the fusion medium supplemented with 0.1 mM $CaCl_2{\cdot}2H_2O$ (T1), 1.0 mM $CaCl_2{\cdot}2H_2O$ (T2) and 0.1 mM $CaCl_2{\cdot}2H_2O$ with 100 ${\mu}$g/ml SCF (T3). Fused embryos were cultured in PZM-3 under 5% $CO_2$ in air at $38.5^{\circ}C$ for 6 days. Developmental rate to blastocyst stage was significantly higher in T3 than other groups (23.0% vs. 13.5 to 15.2%) (p<0.05). Apoptosis rate was significantly lower in T3 than T1 or T2 (p<0.05). The relative abundance of Bax-${\alpha}$/Bcl-xl was significantly lower in in vivo or SCF group than that of control (p<0.05). Moreover, the expression of p53 and caspase3 mRNA was significantly lower in in vivo or SCF group than that of control (p<0.05). These results indicate that the addition of SCF at fusion/activation might improve in vitro development of porcine NT embryos through regulating cdc2 kinase level and expression of apoptosis related genes.

• Journal of Life Science
• /
• v.21 no.12
• /
• pp.1726-1731
• /
• 2011

Human Stem Cell Factor (hSCF) is a cytokine that binds to the c-Kit receptor and plays an important role in hematopoiesis, spermatogenesis, and melanogenesis. To produce the human Stem Cell Factor (hSCF) recombinant protein, we constructed a germline transgenic silkworm using the piggyback vector. The expression of the hSCF gene was driven by the Drosophila heat shock protein 70 (dHsp70) promoter. 3XP3 promotor-driven EGFP was used as a marker which allowed us to rapidly distinguish the transgenic silkworm. A mixture of the donor and helper vector was micro-injected into 1,020 eggs of bivoltin silkworms, Keomokjam. We obtained approximately 22 G1 broods that were EGFP-positive. The expression of the hSCF gene in the transgenic silkworm was analyzed by SDS-PAGE and immunoblotting. Also, analysis of insertion sites into the silkworm genome using inverse PCR showed that exogenous DNA was inserted into the transgenic silkworm genome. These results show that successfully constructed transgenic silkworm expresses the hSCF recombinant protein.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.26 no.3
• /
• pp.330-337
• /
• 2012

This study was performed to assess the Effect of SCF(Schisandrae Chinensis Fructus) on Keratinocyte Damage by UV irradiation. The effect of SCF were determined in UV irradiated HaCaT. We measured LDH release and NO release from HaCaT to elucidate the effect of SCF. And iNOS, TNF-${\alpha}$, COX-2, Bax, Bcl-2, Bcl-xL, c-jun, c-fos gene expression were determined in HaCat using real time PCR method. The results are as follows. SCF inhibited LDH-release, NO production in UV irradiated HaCaT. SCF increased the gene expression Bax, Bcl-2 and Bcl-xL protein in UV irradiated HaCaT. SCF suppressed the gene expression TNF-${\alpha}$ in UV irradiated HaCaT. SCF suppressed the gene expression iNOS, c-fos, and c-jun in UV irradiated HaCaT. SCF not affected the suppression of the gene expression COX-2 in UV irradiated HaCaT. The study showed SCF inhibited the cell damage in UV irradiated HaCaT.

• Korean Journal of Remote Sensing
• /
• v.34 no.4
• /
• pp.625-638
• /
• 2018

In this paper, we derive i) a function to estimate snow cover fraction (SCF) from a MODIS satellite image that has a wide observational area and short re-visit period and ii) a function to determine snow depth from the estimated SCF map. The SCF equation is important for estimating the snow depth from optical images. The proposed SCF equation is defined using the Gaussian function. We found that the Gaussian function was a better model than the linear equation for explaining the relationship between the normalized difference snow index (NDSI) and the normalized difference vegetation index (NDVI), and SCF. An accuracy test was performed using 38 MODIS images, and the achieved root mean square error (RMSE) was improved by approximately 7.7 % compared to that of the linear equation. After the SCF maps were created using the SCF equation from the MODIS images, a relation function between in-situ snow depth and MODIS-derived SCF was defined. The RMSE of the MODIS-derived snow depth was approximately 3.55 cm when compared to the in-situ data. This is a somewhat large error range in the Republic of Korea, which generally has less than 10 cm of snowfall. Therefore, in this study, we corrected the calculated snow depth using the relationship between the measured and calculated values for each single image unit. The corrected snow depth was finally recorded and had an RMSE of approximately 2.98 cm, which was an improvement. In future, the accuracy of the algorithm can be improved by considering more varied variables at the same time.

• Polymer(Korea)
• /
• v.33 no.6
• /
• pp.530-536
• /
• 2009

A cycloaliphatic epoxy/acidic anhydride system incorporating short carbon fibers (SCF) and short glass fibers (SGF) was fabricated and thermal/mechanical properties were characterized. At low filler content both SCF- and SGF-reinforced composites showed a similar decrease in coefficient of thermal expansion (CTE), measured by a thermomechanical analyzer, with increasing loadings, above which SCF became more effective than SGF at reducing the CTE. Experimental CTE data for the SCF-reinforced composites is best described by the rule of mixtures at lower SCF contents and by the Craft-Christensen model at higher SCF contents. Storage modulus (E') at $30^{\circ}C$ and $180^{\circ}C$ was greatly enhanced for short fiber-filled composites compared to unfilled specimens, Scanning electron microscopy of the fracture surfaces indicated that the decreased CTE and the increased E' of the short fiber-reinforced composites resulted from good interfacial adhesion between the fibers and epoxy matrix.

• Journal of Animal Science and Technology
• /
• v.63 no.5
• /
• pp.1086-1097
• /
• 2021

This study examined the impact of using total mixed ration (TMR) and concentrate on feed intake, daily gain, carcass yield grade, and carcass quality grade of Hanwoo steers and its subsequent economic efficiency. Thirty six 7-month-old Hanwoo steers were assigned to one of the four treatment groups, and each group was divided into three repeated pens, with each repeated pen comprising three steers. The treatment groups were: 1) separate feeding with commercial concentrate and forage (namely, SCF) for the entire experimental period; 2) TMR feeding for a growing period followed by SCF for the early and late fattening period (namely, TMRGSCF); 3) TMR feeding for growing and an early fattening period followed by SCF for the late fattening period (namely, TMREFSCF); and 4) TMR feeding for the entire experimental period (namely, TMRW). The results showed that the SCF treatment had significantly (p < 0.05) higher feed intake during the growing period than other treatments. In contrast, the total feed intake had little difference during early and late fattening as well as the whole period regardless of feeding strategies. Daily gain showed no difference during the growing period. However, it was significantly higher in SCF and TMREFSCF treatments for the early and late fattening period, respectively (p < 0.05). The daily gain during the total raising period is in the order of TMREFSCF > TMRGSCF > SCF > TMRW. Carcass characteristics, including carcass weight, loin eye muscle area, and carcass yield grade, did not significantly differ among different treatments. However, TMRW treatment, wherein TMR was fed for a long time, showed that the cold carcass weight was less compared with other treatments, but carcass yield grade was higher with thinner backfat. Backfat thickness was in the order of SCF > TMRGSCF > TMREFSCF > TMRW, showing that the thickness reduced with longer TMR feeding (p < 0.05). TMRGSCF, which numerically had a higher carcass quality grade, showed higher economic efficiency, whereas SCF showed low economic efficiency. In conclusion, it was more feasible to apply TMR strategy in the growing and early fattening period and then SCF for the early or late fattening period to improve carcass yield, quality grade, and economic efficiency.