• IEMEK Journal of Embedded Systems and Applications
• /
• v.14 no.6
• /
• pp.321-327
• /
• 2019

Spectral Beam Combining (SBC) is used for a high-power fiber laser in order to overcome the power limitation of single fiber laser. In SBC, several laser bwams with different wavelengths are combined to obtain a single-aperture beam by diffraction grating. The combining efficiency is dependent on a linewidth, beam quality and specific wavelength of each beam among others. In this paper, we consider the method of a wavelength monitoring and a feedback control of laser diodes used as seeds of laser beams to obtain optimum combining conditions. In order to measure the wavelengths of multi-beam, we use the high resolution camera and diffraction grating with 1,800l/mm. The experiment results show the possibility of feedback control of a current and temperature of multi-seed laser diodes to obtain optimum wavelengths for SBC.

• Annual Conference of KIPS
• /
• 2009.04a
• /
• pp.639-642
• /
• 2009

LN2440SBC 임베디드 보드는 ARM 코어 방식의 S3C2440A CPU를 가진 임베디드 컴퓨터 시스템이다. 이 시스템에 부착한 터치스크린 기능을 가진 TFT LCD 키트인 LP35의 구동을 위해서는 ARM 코어, LCD 컨트롤러, 그리고 LCD 장치와의 통신을 위한 SPI(serial peripheral interface)의 초기화와 LCD 화면에 이미지, 선, 도형 같은 것들의 출력을 가능하게 해주는 그래픽스 라이브러리 함수들이 필요하다. 본 논문은 이같은 기능들을 가지는 LP35를 위한 드라이버의 구현 방법을 기술한다. 특히, 드라이버 구동을 위한 초기화 방법과 화면 출력 기능들의 구현을 위해 필요한 픽셀 디스플레이 함수의 구현에 중점을 두어 설명한다. 또한 픽셀 디스플레이 함수를 이용한 기본 그래픽스 라이브러리 함수들에 대해 설명한다. 드라이버의 초기화를 위해서는 클럭 속도 설정, 범용 입출력 핀(GPIO)을 LCD와 SPI 용으로의 할당. SPI의 마스터/슬레이브 및 보오 레이트 설정, LCD 컨트롤러 레지스터 설정을 통한 LCD 기능 선택. 그리고 SPI를 통한 LCD 장치로의 파워 온(power on) 명령 전달 등이 수행된다.

• Annual Conference of KIPS
• /
• 2009.04a
• /
• pp.635-638
• /
• 2009

컴퓨터 디스플레이를 위한 한글 표현 방법에는 한글 음절의 초성, 중성, 종성 각각에 코드를 부여하고, 이를 조합하여 1 음절을 2 바이트로 처리하는 표준 조합형 코드와 각 음절마다 2 바이트 코드를 부여하는 표준 완성형 코드, 그리고 모든 국가의 언어를 표현하기 위한 만국 공통의 문자부호 체계인 유니코드 방식이 있다. 일반적으로 임베디드 시스템은 PC에 비해 상대적으로 속도가 느리고 저장공간 또한 제한되어 있으나 그 용도에 따라 PC에 필적하는 성능을 가지는 경우도 있다. 따라서 화면에 한글을 출력할 경우, 임베디드 시스템의 자원 환경에 맞는 적합한 방식을 채택해야 한다. 본 논문은 시랩시스(CLabSys)사의 3.5" TFT LCD 키트인 LP35가 부착된 LN2440SBC 임베디드 보드(S3C2440A CPU, 400MHz)의 TFT LCD 드라이버 제작을 위한 초기화 방법과 픽셀 디스플레이 함수를 소개한다. 또한 픽셀 디스플레이 함수와 비트맵 폰트를 사용하여 표준 조합형, 표준 완성형, 유니코드 방식의 3가지 방식에 대한 한글 출력 처리 속도와 필요 메모리 용량을 비교한다. 시험 결과에 따르면, 표준 조합형은 적은 메모리 공간을 차지하지만 초성, 중성, 종성을 조합하는데 시간이 소요되고, 완성형은 조합형에 비해 출력 처리 속도는 빠르나 모든 음절의 저장을 위해 비트맵 폰트의 용량이 크며, 유니코드는 비트맵 폰트의 용량은 가장 크지만, 국가 간 언어의 호환성을 보장하고 출력 속도 또한 세 가지 방식 중 가장 빠른 것으로 나타났다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.5
• /
• pp.784-792
• /
• 1990

In this paper, attempts have been made to compare the subjective performance of sub-band coding (SBC) techniques incorporating four representative modulation transfer functions (MTF's) of th human visual system(HVS): Sakrison, Nill, Ngan, and Rao. In SBC, the frequency band of input signal is split into 16 equal sub-bands. In addition, 28 sub-band splitting schemd which splits more sub-bands in low spatial frequency is considered to compare the 4 MTF's effectively. In encoding of each sub-band, the weight of each sub-band obtained from the MTF of HVS is applied to bit allocation process which minimize the weighted mean square error (WMSE). The differential pulse code modulation(DPCM) coder is used to encode the lowest sub-band and the pulse code modulation(PCM) coder is used for the rest of sub-bands. It is found that the images incorporating the MTF of Rao yields the best results in subjective criteria, followed by Ngan, Nill, Sakrison, and the images not employing the HVS.

• Journal of Advanced Navigation Technology
• /
• v.14 no.3
• /
• pp.452-458
• /
• 2010

In case of an embedded system with computing resource restrictions such as system power and cpu, the overhead due to displaying data on the computer screen may have a significant influence on the system performance. This paper describes an initialization method for LCD-driving components such as an ARM Core, an LCD controller, and an SPI(serial peripheral interface). It also introduces a pixel display function and a panel display method using virtual screen for reducing the display overhead for an LN2440SBC system with an ARM9-based S3C2440A microprocessor. A virtual screen is a large space of computer memories allocated much larger than those needed for one-time display of an image. Displaying a specific region of a virtual screen is done by assigning it as a view-port region. Such a display is useful in an embedded system when concurrently running tasks produce and display their respective results on the screen; it is especially so when the execution result of each task is partially modified, instead of being totally modified, on its turn and displayed. If the tasks running on such a system divide and make efficient use of the region of the virtual screen, the display overhead can be minimized. For the performance comparison with and without using the virtual screen, two different images are displayed in turn and the amount of time consumed for their display is measured. The result shows that the display time of the former is about 5 times faster than that of the latter.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.7
• /
• pp.21-32
• /
• 2024

Since leather shoes cannot be washed with water, there is a need for a cleaning method that can remove extraneous substance from the inside and outside of shoes and senitize the inside of shoes without using water. For this purpose, this paper develops a shoes cleaning machine control system that automatically controls the entire process of shoes cleaning in a shoes cleaning machine that quickly cleans the inside and outside of shoes using compressed air, sterilization solution. The developed system uses Rasberry Pi, a general purpose single board computer(SBC), to control various actuators of the shoes cleaning machine. The shoes cleaning machine operated by the developed system shows a sterilization efficiency of more than 99% and an odor removal efficiency of more than 86% in a cleaning time of less than 1 minute.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.440-443
• /
• 2004

As a main management unit of MSC, PMU controls the MSC payload operation by issuing commands to other subunit and PMU internal modules. One of these main control functions is to drive the APS(Antenna Pointing System) when APS motion is required. For this purpose, SBC(Single Board Computer) for calculating motor commands and APDE for driving APM(Antenna Pointing Mechanism) by PWM signal operate inside PUM. In this paper, details on APDE design shall be described such as electronic board architecture, primary and redundant design concept, Cross-Strap, FPGA contents and latch-up immune concept, etc., which shall show good practices of electronic board design for space program.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.9
• /
• pp.124-132
• /
• 1994

An image data compression method for a digital VCR must satisfy special requirements such as high speed playback. various edting capabilities and error concealment to provide immunity to tape dropouts. Taking these requirements requirements into consideration, this paper proposes a new interframe subband coding algorithm for a digital VCR. In the proposed method, continuous input images are fist partitioned into four frequency bands. The lowest frequency subband is coded with 3-D block adaptive quantization that removes the level redundancy within each level. The other higher frequency subbands are coded by an intraframe coding method using the property of the human visual system. To keep reasonable image quality in high speed palyback, a segment forming method in the frequency domaing is also proposed Computer simulation results demonstrate that the proposed algorithm has the potential of achieving virtually lossless compression in normal play and produces an image with less mosaic errors in high speed play.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.05a
• /
• pp.479-482
• /
• 2006

Mobile Telemedicine uses common technologies that provide a conduit for information exchange between physicians nurses and patients. In addition to patient records, medical professionals will obtain vital signs and other reference data through Ubiquitous Sensor networks(USN). In this paper about a design and implementation of RFID reader platform that received RFID tag information from patients tags, transmit the data to SBC(Single board computer) based on Intel PXA255 ARM CPU and SBC transmit the data to MySQL server in hospital using by Wireless Internet. his system that based on Embedded Linux is composed of RFID module, ARM processor, RS-232 interface, and Wireless LAN. This paper also provides a brief overview and concept of RFID reader, and proposes the design and implementations of the RFID reader platform used QT and MySQL based on Embedded Linux.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.225-231
• /
• 1986

A design of an industrial microcomputer control system for an one-through tube boiler using oil is presented. The microcomputer system is based on standard iSBC 88/40 board. The software consist of a RTE(real time executive) and application tasks. The designed control system saves fuel and gives a more reliable over-all operation.