• Journal of Korea Multimedia Society
• /
• v.9 no.10
• /
• pp.1266-1275
• /
• 2006

In this paper, we propose a real-lime face detection and tracking algorithm using AdaBoost(Adaptive Boosting) algorithm. The proposed algorithm consists of two levels such as the face detection and the face tracking. First, the face detection used the eight-wavelet feature models which ate very simple. Each feature model applied to variable size and position, and then create initial feature set. The intial feature set and the training images which were consisted of face images, non-face images used the AdaBoost algorithm. The basic principal of the AdaBoost algorithm is to create final strong classifier joining linearly weak classifiers. In the training of the AdaBoost algorithm, we propose SAT(Summed-Area Table) method. Face tracking becomes accomplished at real-time using the position information and the size information of detected face, and it is extended view region dynamically using the fan-Tilt camera. We are setting to move center of the detected face to center of the Image. The experiment results were amply satisfied with the computational efficiency and the detection rates. In real-time application using Pan-Tilt camera, the detecter runs at about 12 frames per second.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.2
• /
• pp.181-194
• /
• 1999

Both the chemical components and the physical and mechanical properties of the compacted and undisturbed weathered granite soils were estimated to investigate the influences of the degree of weathering and saturation on the shear strength. The weathered granite soils used in this study were taken from six different sites in Korea. The results showed that the shear strength of weathered granite soil decreased with increasing the degree of weathering and saturation. Under the normal stresses less that 40kPa, the shape of Mohr-Coulomb failure envelope followed curved or hyperbolic relationship and a half of cohesion value obtained by the common shear test was observed. Using the Sueoka's method, the values of CWI were ranged from 21.5 to 31.26 which can be characterized as a completely weathered granite soil. Large decrease in shear strength and remarkable variation in dilatancy were observed in saturated granite soil compared to unsaturated soil. It was also found that the shear strength of undisturbed weathered granite soil of Pungam site can be expressed approximately by the equation of ${(\tau)_{sat}= 1.0(\tau)_{unsat}-12.48}$ and this equation can be extended to the other sites considered in this study.

• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.849-854
• /
• 2023

In this paper, a high-efficiency power amplifier was designed by applying the operating point Class J using LDMOS(laterally diffused metal oxide semiconductor) and optimizing the output matching circuit so that the second harmonic impedance becomes the reactance impedance. The designed power amplifier has a frequency of 108 ~ 110 MHz, Characteristics of PAE(power added efficiency) is 71.5% at P_SAT output (54.5 dBm), 55.5% at P_1dB output (51.5 dBm), and 24.38% at 45 dBm. The CSB(carrier with sideband) amplifier, which is the reference signal in the spatial modulation method, has an operating output of 45 dBm ~ 35 dBm, and linear SDM(sum in the depth of modulation) characteristics(40% ± 0.3%) were obtained. We measure the characteristics in amplitude modulation according to the bias operating point of the power amplifier for CSB and propose the optimal operating point to obtain linear modulation characteristics.

• 한국HCI학회:학술대회논문집
• /
• 2007.02b
• /
• pp.15-20
• /
• 2007

본 연구는 시선 추적 방법(Eye-Tracking Method)을 이용한 디지털 컨버전스 제품의 정보 설계 및 평가에 관한 방법론을 제시하였다. Eye-tracking 데이터는 visual search의 효율성 뿐 아니라 타겟의 유의미성이나 가시성등을 측정하는데 유익하다. 응시 횟수와 응시 시간을 통하여 사용자의 심성 모형에 따른 시선 행위와 제품 메뉴 구조간의 전체적인 일치도를 정량적으로 분석하였고, 각 메뉴 item의 세부적인 인지 반응 정도를 평가하였다. 컨버전스 제품의 한 예로 휴대폰을 선정하여 실험을 실시하였으며, 활성화 확산 실험(SAT)을 수행하여 메뉴 항목 상호간의 인지반응 정도를 통한 문제점을 도출한 후 사용자 시나리오를 작성하였다. 1차 테스트를 통하여 피실험자의 시나리오 수행 시 어려움을 알 수 있었으며, 1차 테스트의 결과와 인터뷰 결과를 바탕으로 프로토타입의 메뉴명을 개선하여 2차 테스트를 실시하였다. 실험 결과 개선 전보다 후의 응시 횟수, 응시 시간 또한 감소하여 수행도가 향상됨으로 메뉴 구조의 개선된 결과를 가져왔다. 본 연구는 인간의 눈 움직임 측정치 결과를 토대로 사용자 심성 모형에 부합하여 누구나 접근이 쉬운 정보 구조를 설계할 수 있었다. 그러므로 본 연구에서 제시하는 Eye-tracking Method는 디지털 컨버전스로 인한 복잡한 정보 구조의 설계와 평가에 기여할 것으로 보인다.

• Journal of the Korean School Mathematics Society
• /
• v.1 no.1
• /
• pp.59-67
• /
• 1998

Probability and statistics is an important section in mathematics which is deeply related to everyday living, natural science and social science. In spite of its importance, many students will throw away it because it becomes very harder as its step(stage) deepens and probability and statistics' relative importance is very small in Korea-SAT(the test of college entrance in Korea). Therefore, by analyzing the involvement carefully between the curriculum in the elementary, middle, high school and the text book, by studying the problem and improvement direction, it is necessary to investigate an effective teaching method. This study intends to give the students the confidence, interests, and accomplishment motive about probability and statistics field and to make a rational and creative decision-making through mathematical speculation by proposing an effective teaching method through analyzing an existing facts in school's probability and statistics field. The contents of this study are composed of four chapters. Chapter three looks into the mathematical curriculum in the elementary, middle, high school and its teaching meaning, the outline of contents, some tips on teaching and problems and presents an effective and concrete teaching method on the basis of the theoretical background in the chapter two. Chapter four is a conclusive part and gives the general improvement and intentional direction in educating the probability and statistics.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.4 no.1
• /
• pp.101-110
• /
• 2000

In case heavy rainfall is a key factor of slope failure, the failure zone is usually developed within the depth of 3~5m from the ground surface regardless of the location of the watertable. If rainfall is taken into consideration, it is general that the slope stability analysis is carried out under the assumption that the cut slope is saturated to the slope surface or the watertable elevates to a certain height so that ${\gamma}_{sat}$, the unit weight of saturated soil, is used. However, the analysis method mentioned above can't exactly simulate the variation of pore water pressure in the slope and yields different failure shape. The applicability of slope stability analysis method considering the distribution of pore water pressure within the slope with heavy rainfalls, was checked out after the stability analysis of a lage-scale cut slope in a highway construction site, where surface failure occurred with heavy rainfalls. An appropriate slope stabilization method is proposed on the base of the outcome of the analysis.

• Transactions of Materials Processing
• /
• v.8 no.1
• /
• pp.29-37
• /
• 1999

An analysis system for sheet metal forming(SAT_STAMP) has been developed to improve the design and tryout process by predicting the deformation behavior more precisely. This analysis system consists of forming analysis, springback analysis and post processor modules. The more accurate prediction of stress history can be achieved due to the improved contact algorithm. Continuous simulation of sequential processes can be carried out conveniently without interruption by the improved data management of the developed system. The error of data transfer between forming analysis and springback analysis is minimized using the proper shell element. Several benchmark test results and practical results are presented to show the effectiveness and reliability of this program.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.05a
• /
• pp.243-248
• /
• 2001

The objective of this study is to investigate the thermal conductivity of cement mortar for apartment housing floor using expansive admixture, copper fiber, cower lathe, hollowed aluminum plate. According to test results, temperature at point (a) located above heating pipe does not show significant variation with age, and temperature at (b), which is located at the finishing surface above heating pipe, and temperature at (c), which is located at center surface between heating pipe has remarkable change. Temperature distribution sat (b) are in order for, structure containing copper fiber>plain structure>structure containing hollowed aluminum plate>structure containing expansive admixture. Temperature distribution, shows high tendency in order for, structure containing copper fiber>structure containing copper lathe>structure containing hollowed aluminum plate>plain structure>structure containing expansive admixture. (a) estimation of temperature distribution is determined with the variation of temperature between (b) point and (c) point during 60 minutes heating.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.10a
• /
• pp.129-134
• /
• 2000

Hardening agent has been the traditional material for surface soil stabilization a sat ground This study aims at determining optimal mixture ratio of hardening agent in accordance with the required design specificutions. Hardening agent is properly mixed with Fly ash, Gyosum, Slag and Cement for the etmmngite hydrates which is dective for early stabilization of unconsoliokrred soil. \ulcornerhe treated soil is the clay tint is widely found here and there in Koresz In this study, preliminary tests were performed to get optirml mixture ratio of stabilizer ingredient, and mrvine clay in Jin-Hae was used to get physid and Md properties. Labomtory tests of 50 stabilized soil were performed to get optimal mixture mtio for 16-stabilizer merial a 6 types, a d stabilizer mixing was determined

• Journal of the Optical Society of Korea
• /
• v.9 no.2
• /
• pp.79-83
• /
• 2005

Spatial calibrations have been performed on the Medium-sized Aperture Camera (MAC) of the RazakSAT satellite. Topics discussed in this paper include the measurements of system modulation transfer function (MTF), relative pixel line-of-sight (LOS), and end-to-end imaging tests. The MTF measurements were made by capturing the scanned knife-edge image on a pixel, and an issue in the MTF calculation algorithm is discussed. The method used to place the focal plane at the correct focal position is described, since they make use of MTF measurements. Relative LOS measurements are done by theodolite measurements of the telescope. Qualitative ground test result of end-to-end imaging is given.