• Journal of the Korean Geotechnical Society
• /
• v.29 no.10
• /
• pp.19-27
• /
• 2013

Tatsuoka and Shibuya (1991) suggest a new single formulation applicable not only to a wide range of geo-materials from soft clay to soft rock, but also to a wide range of strain levels from $10^{-6}$ to $10^{-2}$. We have carried out the plain strain compression test employing 7 kinds of research standard sand specimens and 2 kinds of glass beads, which have been used at world-renowned research institutes. With the result applied to Tatsuoka and Shibuya's newly suggested formulation, we studied a trend of parameters. In conclusion, as the value of confining pressure increases, the value of $C_1(X={\infty})$ becomes greater but there are hardly any changes in the value of $C_2(X={\infty})$. The value of $C_1(X={\infty})$ also becomes greater as the ${\delta}$ value increases, regardless of sand types. However, the values of $C_2(X={\infty})$ and $C_2$(X=Xe) do not show any significant changes when there are changes in the value of ${\delta}$, while the values of ${\alpha}$ and ${\beta}$ tend to decrease as the ${\delta}$ value decreases.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.10
• /
• pp.1825-1832
• /
• 2000

Column experiments were conducted by using soil columns, to investigate feasibility and efficiency of in-situ ozone enhanced remediation for diesel-contaminated soil. The injection of gaseous ozone into soil column revealed the enhanced decomposition of ozone due to the catalytic reaction between ozone and metal (e.g., Fe, Mn etc.) oxides as evidenced by as much as 25 times shorter half-life of ozone in a sand packed column than in a glass beads packed column. Substantial retardation in the transport of and the consumption of ozone were observed in the diesel contaminated field soil and sand packed columns. After 16 hrs ozonation, 80% of the initial mass of diesel (as diesel range organic) concentration of $800{\pm}50mg/kg$, was removed under the conditions of the flow rate of 50mL/min and $6mg-O_3/min$. Whereas, less than 30% of diesel was removed in the case of air injection. Analysis of the residual TPH(total petroleum hydrocarbon) and selected 8 aliphatics of diesel compounds in the inlet and the outlet of the column confirmed that diesel nonselectively reacted with ozone and then shifted to lower carbon numbered molecules. Water content also was found to be an important parameter in employing ozone to the hydrocarbon-contaminated soil.

• Land and Housing Review
• /
• v.2 no.1
• /
• pp.69-78
• /
• 2011

The purpose of this research is particle shape evaluation of aggregate using Digital Image Process(DIP). DIP is very useful to measure the roughness and particle shape of aggregates. Couple of aggregates, like standard sand, two different crushed stones, and two different marine aggregates, have been employed. Shape factors of two different marine aggregates are ranged 0.35 to 0.54. Crushed stone I is 0.74 which is highly flat, but standard sand is elongated shape. Especially, two marine aggregate showed a big difference of width and length which meaned a long shape. There is any significant difference of elongation ratio and flatness for each aggregate with different measuring system, like direct measurement of vernier calipers and DIP method. Shape conversion coefficient and equivalent diameter for changing 2D image to 3D image by the Digital Image Process(DIP) have been suggested and modified particle size distribution curve has been showed. The measured flatness ratios of each aggregate were 0.30, 0.36, 0.47 and 0.83, respectively. Also, the conversion shape coefficients of each aggregate were determinded as 0.77, 0.78, 0.84 and 0.92. The size of aggregate has been modified by multiplying the shape conversion coefficient and the aggregate size from DIP. The modified gradation curve with modified volume and weight of aggregate has been suggested. Within the limited test results, DIP is one of useful to get the particle shape of aggregate with limitation of measuring errors and to apply the particle distribution curve.

• Water for future
• /
• v.24 no.3
• /
• pp.49-60
• /
• 1991

As a second part of the study entitled "Field Measurement and Analysis of Fluvial Sediment in the Cheongmi-Strea", this study concerns mineralogical and contaminative characteristics of sediment particles collected at Wonbu-Gyo and Hanpyeong-Gyo in the Cheongmi-Stream. The mineralogical analysis of the bed sediment collected reveals that, in general , quarz is the most abundant mineral found in sands with feldspars and rock fragments in the next, which confirms what is known in the literature. The shape factor of sand particles is about 0.7, which also agrees to what is known in the foreign literature. The analysis also reveals that the clay particles collected are composed mainly of illite, kaolinate, and chlorite. The analysis of contamination reveals that there is no substantial difference between the contents of organic material and heavy metals in the surface water and those in the pore water beneath the river bed. It is because the sampling for this analysis was conducted right after the September flood during which the fresh top soil from the upstream watershed replaced the old bed sediment and pore water that would probably be more contaminated. The contents of geavy metals in the bed sediment of sand particles do not exceed those in the soils adjacent to the river. For fine sediment such as clays, however, the contents of heavy metals, especially of mercury and zinc, far exceed those in the soils adjacent to the river. These fine sediments are transported downstream in the form of wash load and deposited in part on flood plains, which could be a new source of contaminants.taminants.

• Economic and Environmental Geology
• /
• v.54 no.4
• /
• pp.427-439
• /
• 2021

On the base of the aggregate extraction statistics, this study tried to analyse the demand and supply of aggregate resources of each local government and provide directions for the stable and sustainable supply and demand of aggregate resources in the future. In 2019, aggregates were produced in 148 cities, about 65% of the 229 cities of Korea, but in 7 metropolitan cities with 74 local governments, only 19 cities developed the aggregate. It means that aggregate extraction is taking place in almost all regions in Korea. Sand and gravel were produced in 110 districts and 132 districts, respectively. By aggregate source, river aggregates were extracted in 4 local governments, land aggregates in 42 local governments, forest aggregates in 75 local governments, crushed aggregates in 105 local governments, and washing aggregates in 15 local governments. In other words, 81 district in Korea have not extracted land-based aggregate at all. 71 local governments produced only one type of aggregate, and 55 local governments developed two types of aggregate, and 22 local governments developed more that three types of aggregate. In 2019, the leading producing local government were, in descending order of volume, Ulju-gun, followed by Hwaseong-si, Cheongju-si, Pocheon-si, Paju-si, Yongin-si, Gimhae-si, Gwangju-si in Gyeonggi-do. 41 local governments have developed aggregates of more than 1 million m³, and the combined production of the 41 cities accounted for about 70% of national total. This shows that the aggregate extraction trend of local governments is becoming larger and more concentrated.

• Journal of the Korean earth science society
• /
• v.26 no.5
• /
• pp.443-458
• /
• 2005

Late Quaternary deposits of the core in the western area of the Nakdong River delta consist of four sedimentary units: Unit I, II, III and IV, in ascending order, controlled by the sea-level change since the last interglacial period. Unit I unconformable overlying Cretaceous basement rocks is composed of sandy gravel and sand deposited in a fluvial channel before the first marine transgression. Unit II composed of stiff massive mud is interpreted as a shallow marine deposits formed during the last interglacial period (probably MIS 5). The development of the fissures coated with oxidized materials in the upper part of Unit II is a feature of subaerial exposure, which indicates erosional contact with the upper Unit III. Unit III is made up of soft massive mud and soft shelly massive mud deposited in a tidal flat and a inner shelf, respectively, since the Holocene transgression (about 9,000 yr BP). Unit Ⅳ consisted of soft shell bedded mud and yellowish sandy mud was deposited in the delta environments during the regression (after about 5,000 yr BP). The lower shell bedded mud was deposited in a tidal flat and the upper sandy mud was deposited in the floodplain corresponding to present site of the Nakdong River delta.

• Korean Journal of Plant Resources
• /
• v.23 no.1
• /
• pp.7-13
• /
• 2010

This experiment was conducted to establish the micropropagation of Calanthe discolor through multiple shoot formation from the culture of leaf, corm and root explants. Frequency of adventitious shoot formation from leaf explants was higher than those of corms and root explants. Frequency of adventitious shoot formation on medium with various concentrations of BA (0. 1.0, 3.0, and 5.0 mg/L) and NAA (0, 0.1, 0.5, and 1.0 mg/L) was tested. The maximun induction of adventitious shoot was obtained on half strength Murashige and Skoog (MS) medium supplemented with 3.0 mg/L BA and 1.0 mg/L NAA after 6 weeks of culture. Multiple shoots were transferred onto half strength MS medium with various concentrations of GA3 (0, 0.1, 0.5, 1.0, 3.0, and 5.0 mg/L). The number and length of multiple shoots on medium were highest on medium with 3.0 mg/L GA3. All the adventitious shoot grew well and rooted on half strength MS medium with 3.0 mg/L NAA. The plantlets were acclimatized up to 100% on sand with TKS-II or pearlite with TKS-II.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.5
• /
• pp.57-66
• /
• 2003

In order to verify the applicability of the developed modified parallel IWAN model. two types of cyclic torsional shear tests were performed using Kum-Kang and Toyoura sands. One was a symmetric-limit loading test and the other was an irregular loading test. Model parameters were derived from the symmetric limit loading tests at various relative densities and confining pressures. The modified parallel IWAN model can predict the cyclic hardening behavior of sands very well as increasing loading cycles in the symmetric-limit tests. Irregular loading tests were performed using the loading shape suggested by Pyke(1979). Cyclic behaviors under irregular loading were simulated using model parameters derived from symmetric limit loading test results of similar loading conditions. The predicted cyclic hardening behaviors under irregular loading matched well with experimental results and the applicability of the proposed model was verified.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.4
• /
• pp.199-206
• /
• 2002

The bearing capacity of open-ended piles is affected by the degree of soil plugging, which is quantified by the incremental filling ratio, IFR. However, most design criteria for open-ended piles do not consider the variation of pile bearing capacity with IFR. In this study, new design equations for calculating the pile base and shaft load capacities, based on IFR value of the pile, were proposed using the results of model pile tests. A full-scale pile load test was also conducted on fully instrumented open-ended pile driven into gravelly sand. The IFR for the pile was continuously measured during pile driving. In order to check the accuracy of predictions made with the proposed equations, the equations were applied to two examples, including the pile load test preformed in this study. Based on the comparisons with the pile load tests results, the proposed equations appear to produce satisfactory predictions.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.7
• /
• pp.412-417
• /
• 2015

This study investigated to recycle geobond and ash produced in thesewage sludge incinerator using reduction/stabilization. Nonsintering process was performed by binding cement (High Early Strength Portland cement, Micro cement), geobond and sand mixed with sewage sludge ash (SSA). Chemical ingradients of the sewage sludge ash was mainly composed of $SiO_2$, $Al_2O_3$, $Fe_2O_3$, CaO and others, which were similar to those of the each binders consisting High Early Strength Portland cement, Micro cement and geobond. Results showed that unconfined the long term compressive strength could be obtained components of sewage sludge ash. It exceeded more than double score 64.6 MPa of the Korean standard ($22.54MPa=229.7kg/cm^2$). Microstructure of solidified block for the different admixture was related to the compressive strength according to SEM analysis. Optimum mixing range of the sewage sludge ash to each binders were found to be 10~40% which can widly safely regulate the confined a long term compressive strength. The best binder of long term compressive strengh was revealed Geobond more than High Early Strength Portland cement and Micro cement. This study revealed the sewage sludge ash can be partial replacement of the inorganic binder & application block for recycling.