• 한국보건간호학회지
• /
• 제16권2호
• /
• pp.239-253
• /
• 2002

Health care for women regularly focuses on the reproductive system to the exclusion of other health needs. The lack of research focusing on women's common health issues is a major problem to the enhanced optimal level of women's health. Health care providers have to recognize biological and social differences between men and women. This study was conducted to identify the baseline data and their correlation of health perception, health behavior, and health status of adult women for developing nursing intervention. The study was a descriptive correlational design. A convenient sampling method was used for collecting data from 103 adult women, over 18 years of age, during the period from Sep 1 to Nov 30, 2001. The study's subjects were interviewed using a structured questionnaire. The instruments for this study were the health perception scale modified by Lee(1985) based on the tool developed by Ware(1977) and Jenkins (1966), and the health behavior scale by Ko, Kumja(1987). Health status was measured by the short form Cornell Medical Index(CMI) modified by Nam, Hochang(1965). The data were analyzed SPSS PC+, by frequency, mean, t-test, ANOVA, and Pearson correlation coefficients. Also, the Duncan test was utilized for a post hoc test of ANOVA. The results of this study are as follows: 1. The mean score for health perception was 3.02(S.D=0.39) on a 5 point scale. 2. The mean score for health behavior was 3.08(S.D=0.43) on a 5 point scale. 3. The mean score for health status was 18.54 on 58 items. The mean score for physical symptoms of a subscale of health status was 11.30 on 36 items and the mean score for psychological symptoms was 7.37 on 22 items. 4. The relationship of sociodemographic variables to health perception. health behavior, and health status of women.: 1) There were significant differences in the scores of health perception by disease experience(t=-3.37, p=0.00). 2) There were significant differences in the scores of health behavior by age(F=10.52, p=0.00), height(F=4.73, p=0.01), marital status(t=-5.56, p=0.00), educational background(t=2.90, p=0.00), and drinking or non-drinking(t=2.17, p=0.03). 3) There were significant differences in the scores of health status by educational background(t=2.28, p=0.02) and disease experience(t=2.61, p=0.01). 5. Health perception showed significant positive correlation with health behavior(r=0.39, p=0.00). Health perception showed significant negative correlation with health status(r=-0.44, p=0.00), that is, the more women perceived health, the less she complained about unhealthy symptoms. Health behavior had no significant correlation with health status but showed a positive correlation with psychological symptoms of a subscale of health status(r=-0.19, p=0.05). Many of the leading causes of disease are preventable through changes in health perception and behavior. The need to increase individual awareness of relationships among health perception, health behavior, and health status and to enhance knowledge regarding the long-term effects of positive health behaviors, is an important nursing strategy for women's health promotion.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.75-78
• /
• 2007

Recently, the need for micro mold or micro mechanical parts has been rapidly increased. As feature size decreases, conventional machining processes show their limitation. Micro electrical discharging machining (EDM) and electrochemical machining (ECM) have many advantages in micro machining. They can be used to make structures of micro scale, or even nano scale size. In this paper, the application of micro EDM and ECM has been investigated.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.383-389
• /
• 2005

This research is to develop a seismic response analysis method for a spent fuel storage cask. FEM model is built for the test model of 1/8 scale spent fuel dry storage cask using available 3D contact conditions in ABAQUS/Explicit. Input load for this analysis os a seismic wave of El-centro earthquake, and the friction and damping coefficients in the analysis condition we obtained from the test result. Penalty and kinematic contact methods of ABAQUS are used for mechanical contact formulation. The analysis method was verified for rocking angle obtained by seismic response tests. The kinematic contact method with an adequate normal contact stiffness showed a good agreement with tests.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.47-50
• /
• 2003

Hot-forging Process and die design was made for a large-scale compressor wheel of Ti-6Al-4V alloy with 2-D FE analysis. The design integrated the geometry-controlled approach and dynamic materials modelling(DMM). In order to obtain the processing contour map of Ti-6Al-4V alloy based on DMM, compression tests were carried out in the temperature range of 915$^{\circ}C$ to 1015$^{\circ}C$ and the strain range of 10$\^$-3/s$\^$-1/ to 10s$\^$-1/. In the die design of the compressor wheel using the rigid-plastic FE analysis, forging dimensional accuracy, the capacity of the forging machine and defect-free forging were considered as main design factors. The microstructure of hot forged wheel using the designed die showed a typical alpha-beta structure without forging-defects.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제28회 KOSCO SYMPOSIUM 논문집
• /
• pp.173-179
• /
• 2004

Combustion of refuse derived fuel(RDF) and refuse plastic fuel (RPF) was carried out in a lab-scale circulating fluidized bed. Experiment was investigated cold flow visualization. RDF was made by C & tech and RPF was made by KRS. The results include distribution of temperature in the combustion chamber, and concentrations of flue gas such as $O_2$, $CO_2$, CO, $NO_x$ and HCs Micro G.C(gas chromatograph) was employed to find out concentration of He Temperature distribution was different when RDF and RPF were burnt respectably. As air ratio became increased, $CO_2$, CO, and total of HCs emissions were decreased. According to the number of carbon atom of HCs, HC were classified as five kinds of HC.

• Wind and Structures
• /
• 제12권3호
• /
• pp.179-204
• /
• 2009

A physical and numerical steady flow impinging jet has been used to simulate the bulk characteristics of a downburst-like wind field. The influence of downdraft tilt and surface roughness on the ensuing wall jet flow has been investigated. It was found that a simulated downdraft impinging the surface at a non-normal angle has the potential for causing larger structural loads than the normal impingement case. It was also found that for the current impinging jet simulations, surface roughness played a minor role in determining the storm maximum wind structure, but this influence increased as the wall jet diverged. However, through comparison with previous research it was found that the influence of surface roughness is Reynolds number dependent and therefore may differ from that reported herein for full-scale downburst cases. Using the current experimental results an empirical model has been developed for laboratory-scale impinging jet velocity structure that includes the influence of both jet tilt and surface roughness.

• 드라이브 ㆍ 컨트롤
• /
• 제12권1호
• /
• pp.21-27
• /
• 2015

Pneumatic cylinders are classified into rod-type pneumatic cylinders and rodless pneumatic cylinders depending on the presence of the rod. Rodless cylinders have a constant area and have no deflection. Rodless cylinders are widely used in automatic systems requiring high-speed performance and high-precision transportation. However, the research of the pneumatic cylinder has been focused on the structure and life characteristics. In this research, aging characteristics and shape parameter analysis which are related to the lifetime were investigated. By conducting the lifetime tests with two different materials for the transfer plate, the failure mode and lifetime characteristics were analyzed. By the Anderson-Darling (A-D) verification based on the complete data set, the analysis results of lifetime distribution, shape parameter, and scale parameter were provided.

• Steel and Composite Structures
• /
• 제22권6호
• /
• pp.1337-1358
• /
• 2016

The current study focuses on the assessment and interface response of reinforced concrete elements with composite materials (carbon fiber reinforced polymers-CFRPs, glass fiber reinforced polymers-GFRPs, textile reinforced mortars-TRM's, near surface mounted bars-NSMs). A description of the transfer mechanisms from concrete elements to the strengthening materials is conducted through analytical models based on failure modes: plate end interfacial debonding and intermediate flexural crack induced interfacial debonding. A database of 55 in total reinforced concrete columns (scale 1:1) is assembled containing elements rehabilitated with various techniques (29 wrapped with CFRP's, 5 wrapped with GFRP's, 4 containing NSM and 4 strengthened with TRM). The failure modes are discussed together with the performance level of each technique as well as the efficiency level in terms of ductility and bearing/ bending capacity. The analytical models' results are in acceptable agreement with the experimental data and can predict the failure modes. Despite the heterogeneity of the elements contained in the aforementioned database the results are of high interest and point out the need to incorporate the analytical expressions in design codes in order to predict the failure mechanisms and the limit states of bearing capacities of each technique.

• 근관절건강학회지
• /
• 제19권3호
• /
• pp.350-361
• /
• 2012

Purpose: The purpose of this study is to explore the level of bone mineral densities of the femur neck and to identify factors affecting bone mineral density of the femur in Parkinson's disease (PD) patients. Methods: Participants were 121 PD patients visiting the outpatient clinic of D University Hospital in B City. Bone mineral density was measured at the femur neck by using a dual-energy x-ray absorptiometry. The serum vitamin D level, the amounts of milk intake, caffeine intake, cigaret smoking, and alcohol consumption, and the number of steps taken daily were measured. Past and present disease history, the medication history, and duration of the disease were also collected. The level of disability was obtained by neurologists using the Hoehn and Yahr stage and the Unified Parkinson's Disease Rating Scale. Results: Among PD patients, 57% had osteopenia and 15.7% had osteoporosis. The bone mineral density of the femur was associated with weight, serum vitamin D level, age, and working status. Conclusion: The identification of weight and serum vitamin D level as important predictive factors emphasizes the importance of balanced nutrition for PD patients.

• 한국의류학회지
• /
• 제47권3호
• /
• pp.511-530
• /
• 2023

This study aims to analyze middle-aged men's frontal body shape asymmetry by measuring the left and right body dimensions and angles of 388 middle-aged men aged 40 to 59 using 3D body scan data and comparing the measured values. The study also compares the measured values of width, height, and angle and their relationships using Size Korea's anthropometric measurement and posture index of the New York Posture Rating Scale. The results confirm that the asymmetric shape characteristics of the upper and lower body appear differently. In addition, the asymmetrical characteristics between the upper and lower body differed, indicating that the close parts of the body affect each other. Similar to the difference in the left and right frontal body shapes and the average angle distribution, the asymmetrical upper and lower body characteristics also are found to be dissimilar when the correlations are examined. In contrast, there is no asymmetry in the width, height, and angle considering the age and BMI groups. Finally, the study classifies three body types and identifies their asymmetric characteristics. Overall, this study contributes primary data for further research on pattern production for asymmetric and unique body types and the development of customized apparel products.