• Korean Journal of Ecology and Environment
• /
• v.44 no.1
• /
• pp.75-84
• /
• 2011

We examined the effect of the turbid water on the periphytic diatom community in an artificial stream system. The artificial stream was constructed with transparent acryl and composed of four channels. Each channel ($20\;cm{\times}200\;cm{\times}40\;cm$) was supplied continuously with eutrophic lake water. In order to the freely colonize and grow diatoms, artificial substrate was installed with commercial slide glass soaked in 1% agar. Prior to introducing turbid water, the artificial stream was operated with lake water for 6 days to permit the propagation of diatom community on the substrates. The turbid water prepared with sediment sieved with ${\varphi}$ $64\;{\mu}m$ at $2\;g\;L^{-1}$ (final concentration, 300 NTU) was provided daily for 50 minute duration. The experiment was conducted for 7 days with manipulated experimental condition of light ($50{\sim}80\;{\mu}mol\;m^{-2}s^{-1}$, light:dark=24:0), temperature ($10{\pm}1^{\circ}C$), and flow rate ($0.31\;cm\;s^{-1}$). Sampling and analysis were conducted daily for water quality and diatom. Turbidity of the water varied 162.2~173.2 NTU during the experiment. After introduction of turbid water, DO, pH and TN were decreased, while SS and TP increased significantly. A total of 14 genera and 47 species of diatoms was observed on the artificial substrates during the experimental period. Of these, Navicula appeared to be a most dominant genus with 10 species, followed by Cymbella (6 species), Fragilaria (6 species) and Gomphonema (5 species). Achnanthes minutissima was the most dominant species (>70% of total frequency) in both control and treatment experiments. Increase in diatom abundance lasted for three days since turbid water introduction, after that they gradually decreased by the termination of the experiment. These results suggest that frequent supply of highly-concentrated turbid water significantly decreases the periphytic diatom community, and retard the recovery of the stable food-web within the stream.

• Horticultural Science & Technology
• /
• v.30 no.4
• /
• pp.437-441
• /
• 2012

This study was conducted to find out the optimum container for increasing acclimatization rate of in vitro mass propagated plantlets of Ever-bearing strawberry (Fragaria ${\times}$ ananassa Duch.) via bioreactor. Four types of containers were used such as transparent plastic container (TPC), plug tray (PT), I-pot (IP), and black vinyl pot (BVP). Number of date maintaining soil water content above 10% was five days in TPC, three to four days in BVP, two days in PT, and one day in IP. Survival rate of plantlets was 80% in BVP, 70% in TPC, 55% in IP, and 15% in PT. In TPC, growth increment of plantlets was the greatest among all the tested containers and the lowest in IP. Numbers of runner per plant were 3.3 in BVP, 2.9 in TPC, 1.6 in PT, and 1.2 in IP. Total cost was 44,405,300 won/10 a in BVP, resulting in reducing more 6,659,400 won/10 a than IP's (51,064,700 won/10 a). Around 102,718 plants/10 a were produced by using BVP, suggesting that 30,265.1 plants/10 a more could be produced than IP (72,452.9 plants/10 a). Production cost per plant was 432.3 won in BVP, resulting in reducing 272.5 won than IP's (704.8 won). As a result, BVP was appropriate for acclimatization of in vitro plantlets through bioreactor system.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.2
• /
• pp.244-249
• /
• 2003

To investigate the hepatic oxygen free radical metabolizing system and changes of serum cholesterol levels in rats fed a diet supplemented with Monascus pigment (MP), Sprague-Dawley rats weighing about 300 g have been fed a diet supplemented with 2% or 4% MP for a month. The rats fed 2% MP supplemented diet gained less body weight than the control rats and those fed 4% W supplemented diet. Those fed 2% or 4% MP supplemented diet had no remarkable changes in liver function on basis of liver weight/body weight, serum levels of xanthine oxidase, alanine amino transferase activity In rats fed 2% and 4% MP supplemented diet, hepatic cytochrome P45O dependent aniline hydroxylase activity significantly (p<0.05) declined about 32%, 37% respectively and showed no significant differences between rats fed 2% and 4% MP supplemented diet whereas those fed 2% MP supplemented diet showed about 29% increased hepatic xanthine oxidase activity. And hepatic glutathione S-transferase and glutathione peroxidase activites in rats fed 2% MP supplemented were more increased by about 17%, 28% respectively than the control rats. There were no significant differences both in between those fed 2% and 4% MP supplemented diet. Especially rats fed 2% or 4% MP supplemented diet showed a significant (p<0.05) increase in hepatic catalase activity by 41%, 25% compared with control rats and those fed 4% MP supplemented diet showed more decrease in tendency of catalase activity than those 2% MP supplemented diet. But hepatic superoxide dismutase activity and glutathione content were appeared to be similar value among three groups. On the other hand, rats fed 2% MP supplement diet showed 17% increased levels of serum HDL-choresterol and 26% decreased value of LDL-cholesterol and serum level of triglyceride. But no different value were appeared between those fed 2% and 4% MP supplemented diet. Especially in those fed 2% and 4% MP supplemented diet, artherogenic index were significantly (p<0.05) declined by 37%, 29% respectively compared with control. In conclusion, it is likely that rats fed a diet supplemented with a proper quantity of MP may have the potential of oxygen free radical detoxication and lowering of artherogenic index.

• BMB Reports
• /
• v.30 no.5
• /
• pp.303-307
• /
• 1997

Grb2, which is composed of a Src homology 2 (SH2) domain and two Src homology 3 (SH3) domains, is known to serve as an adaptor protein in signaling for Ras activation. Thus, a blocker of the Grb2 interactions with other proteins can be a potential candidate for an anticancer drug. In this study, we have developed a high throughput screening method for SH3 domain binding ligands and blockers. Firstly, we made and purified the glutathione S-transferase (GST)-fusion proteins with the Grb2 SH2 and SH3 domains, and the entire Grb2. This method measures the binding of a biotin-labeled oligopeptide, derived from a Grb2/SH3 binding motif in the hSos, to the GST-fusion proteins, which are precoated as glutathione S-transferase fusion protein on a solid phase. When $1\;{\mu}g$ of each fusion protein was used to coat the wells, both N- and C- terminal SH3 the domains as well as the whole of Grb2 were able to interact with the biotin-conjugated ligand peptide, while the SH2 domain and GST alone showed no binding affinity. Although N- and C- terminal SH3 domains showed an increase of binding to the ligand peptide in proportion to the amount of peptide, the GST fusion protein with Grb2 demonstrated much higher binding affinity. GST-Grb2 coating on the solid phase showed a saturation curve; 66 and 84% of the maximal binding was observed at 100 and 300 ng/$100\;{\mu}l$, respectively. This binding assay system was peptide sequence-specific, showing a dose-dependent inhibition with the unlabeled peptide of SH3 binding motif. Several other peptides, such as SH2 domain binding motifs and PTB domain binding motif, were ineffective to inhibit the binding to the biotin-conjugated ligand peptide. These results suggest that our method may be useful to screen for new anticancer drug candidates which can block the signaling pathways mediated by SH3 domain binding.

• Ocean Systems Engineering
• /
• v.1 no.4
• /
• pp.285-296
• /
• 2011

Spar platforms have several advantages for deploying wind turbines in offshore for depth beyond 120 m. The merit of spar platform is large range of topside payloads, favourable motions compared to other floating structures and minimum hull/deck interface. The main objective of this paper is to present the response analysis of the slack moored spar platform supporting 5MW wind turbine with bottom keel plates in regular and random waves, studied experimentally and numerically. A 1:100 scale model of the spar with sparD, sparCD and sparSD configuration was studied in the wave basin ($30{\times}30{\times}3m$) in Ocean engineering department in IIT Madras. In present study the effect of wind loading, blade dynamics and control, and tower elasticity are not considered. This paper presents the details of the studies carried out on a 16 m diameter and 100 m long spar buoy supporting a 90 m tall 5 MW wind turbine with 3600 kN weight of Nacelle and Rotor and 3500 kN weight of tower. The weight of the ballast and the draft of the spar are adjusted in such a way to keep the centre of gravity below the centre of buoyancy. The mooring lines are divided into four groups, each of which has four lines. The studies were carried out in regular and random waves. The operational significant wave height of 2.5 m and 10 s wave period and survival significant wave height of 6 m and 18 s wave period in 300 m water depth are considered. The wind speed corresponding to the operational wave height is about 22 knots and this wind speed is considered to be operating wind speed for turbines. The heave and surge accelerations at the top of spar platform were measured and are used for calculating the response. The geometric modeling of spar was carried out using Multisurf and this was directly exported to WAMIT for subsequent hydrodynamic and mooring system analysis. The numerical results were compared with experimental results and the comparison was found to be good. Parametric study was carried out to find out the effect of shape, size and spacing of keel plate and from the results obtained from present work ,it is recommended to use circular keel plate instead of square plate.

• Survey Research
• /
• v.10 no.1
• /
• pp.91-112
• /
• 2009

The aim of this study is to suggest a new website measurement scale revised in accordance with the present tendency, and to test the practical use of it. The empirically current studies suggest the information, connectivity, practical function, lay - out, design, interlace, system, service as a website measurement scale. However. this study suggest a new website measurement scale including communication between internet users, platform for editing information. The test of a practical use about measurement scale progressed by a survey on computer access. A sample of 300 internet users answered the question based on a new website measurement scale. The result of this study shows that primary factors of the website measurement scale are information, user interface, website service, and communication. The influence of these factors on user's website preference changed as compared with the past. The result also shows that there is close correlation between information factor and communication factor. And the communication factor suggested on this study has effected in user's website satisfaction. Results imply that the idea of web2.0 is practically an important strategy for improving website satisfaction. And, because influence of primary factors on the website satisfaction has changed continually, strategic planning will have to be kept up.

• Korean Journal of Social Welfare
• /
• v.66 no.4
• /
• pp.257-280
• /
• 2014

This is a study of Jinminso. The purpose of the study is to search and analyze the documents about Jinminso. The data is composed with the first hand historical documents both government documents and civil newspapers which are searched by internet. Based on the documents found, it is safe to say that Jinminso has existed and functioned as an indoor almshouse for the poor. It was established in June 25, 1898 by civil people with donated money in order to reduce the burden of Emperor and to share the love and care for their people with a brotherhood mind. The Jinminso resident were the poor, the sick, the orphans, widows, elderly living alone, and the disabled. They received food, clothes, and shelter. However, Emperor Gojong ordered to shut down Jinminso, and it was closed in Sept. 25, in 1898. The main reason was inappropriate collection of money for the agency operation from the merchants. When Jinminso was closed, all the inmates became homeless. The founders asked to reopen it, and it was accepted but this time was opened as a government agency in 1899. Jinminso imposes great meanings. One, Jinminso was not just an office but a direct service agency housing hundreds of poor people; two, poverty was understood as social problem not just a local district problem; three, rules and regulations were prepared to set up a system of modern age social welfare. The findings provide a clue how the government and society perceived poverty and the poor during the time of late 1800s to early 1900s. The existence of Jinminso will pose many new question.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.440-443
• /
• 2002

Present1y the X-Ray diagnosis system is a real condition that is changing by digital ways in it's existent analog ways. This digital radiation detector is divided by the direct method and the indirect method. The indirect method of applied voltage has special qualities that the resolution is low than direct method by diffusion effect that happens. The conversion process ( radiation${\rightarrow}$visible ray${\rightarrow}$electrical signal of two times, has shortcomings that the energy conversion efficiency of electrical signal is low. The direct method has shortcomings that need strong electric fie1d to detect electrical signal efficiently. This research achieved to develop digital detector of the Hybrid method that have form that mixes two ways to supplement shortcoming of direct. indirect method. A studied electrical characteristic by Iodine's Mixture ratio change is added to selenium in the detector which has a multi-layer structure (Oxybromide + a-Se). There are 8 kinds of Manufactured compositions to amorphous selenium Iodine each 30ppm, 100ppm, 200 ppm, 300ppm, 400ppm, 500ppm, 600ppm, 700ppm by a doped photoconductor through a vacuum thermal evaporation method. The phosphor layer is consisted of Oxybromide ($BrO_2$) which uses optical adhesives multi-layer structure. The manufactured compositions calculates and compares Net Charge and signal to noise ratio measuring Photocurrent about Darkcurrent and X-ray. When doped Iodine Mixture ratio is 500ppm to the multi-layer structure (Oxybromide + a-Se), applied voltage of $3V/{\mu}m$, leakage current of compositions $2.61nA/cm^2$ and net charge value by 764pC/$cm^2$/mR then the best result appeared.

• Journal of Biomedical Engineering Research
• /
• v.32 no.3
• /
• pp.245-250
• /
• 2011

Parallel imaging technique can provide several advantages for a multitude of MRI applications. Especially, in SENSE technique, sensitivity maps were always required in order to determine the reconstruction matrix, therefore, a number of difference approaches using sensitivity information from coils have been demonstrated to improve of image quality. Moreover, many filtering methods were proposed such as adaptive matched filter and nonlinear diffusion technique to optimize the suppression of background noise and to improve of image quality. In this study, we performed SENSE reconstruction using computer simulations to confirm the most suitable method for the feasibility of filtering effect and according to changing order of polynomial fit that were applied on variation of spatial resolution of sensitivity map. The image was obtained at 0.32T(Magfinder II, Genpia, Korea) MRI system using spin-echo pulse sequence(TR/TE = 500/20 ms, FOV = 300 mm, matrix = $128{\times}128$, thickness = 8 mm). For the simulation, obtained image was multiplied with four linear-array coil sensitivities which were formed of 2D-gaussian distribution and the image was complex white gaussian noise was added. Image processing was separated to apply two methods which were polynomial fitting and filtering according to spatial resolution of sensitivity map and each coil image was subsampled corresponding to reduction factor(r-factor) of 2 and 4. The results were compared to mean value of geomety factor(g-factor) and artifact power(AP) according to r-factor 2 and 4. Our results were represented while changing of spatial resolution of sensitivity map and r-factor, polynomial fit methods were represented the better results compared with general filtering methods. Although our result had limitation of computer simulation study instead of applying to experiment and coil geometric array such as linear, our method may be useful for determination of optimal sensitivity map in a linear coil array.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.4
• /
• pp.293-300
• /
• 2016

Purpose: The purpose of this study is finding proper bonding agents to be used when adding bis-acryl composite provisional materials. Materials and Methods: Three bonding agents with different chemical compositions were included in this study. Forty disk shaped specimens of bis-acryl composite provisional material were prepared and divided into 4 groups according to the bonding agents. Control group didn't have bonding agent. Through the Teflon mould with 4.0 mm diameter hole with 4.0 mm thickness the same bis-acryl composite provisional material was added on the disks after the surface of each specimen was treated with designated bonding agent according to the manufacturer's instructions. Shear bond test was performed and the fractured surfaces were inspected with a microscope. One-way analysis of variance was conducted and the result was further analysed with Turkey post hoc test at the significance level of 0.05. Results: The highest strength was acquired from the specimens bonded with chemical cure system and it was statistically significant (P < 0.05). This group showed 100% cohesive failures. The lowest bonding strength was recorded from the specimens used conventional light cure bonding agent, and this group's result was similar with the control group. The group used a light cure bonding agent claiming improved compatibility revealed significantly higher bond strength to the traditional light cure bonding agent group in a statistically significant way (P = 0.043). Conclusion: According to the bonding agent used the shear bond strength was significantly affected. Therefore the choice of proper bonding agent is important when hiring a bonding agent to add bis-acryl composite provisional materials.