• 한국사회복지학
• /
• 제62권3호
• /
• pp.109-139
• /
• 2010

노인인구의 증가에 따라 사회보험제도가 출현하였고 이에 한국과 일본 양국에서는 전문적인 요양보호사와 개호복지사의 양성이 중요한 이슈로 이야기되었다. 본 연구의 목적은 한국과 일본의 케어워커에 대한 제도인식과 직무만족도를 비교연구 한 것이다. 연구대상으로 한국은 요양시설과 재가시설에서 근무하는 경남지역 요양보호사, 일본은 양로시설과 특별양로홈에서 근무하는 오사카지역의 개호복지사로 2009년 12월 20일에서 2010년 1월 5일까지 각각 150부씩 총 300부 설문조사하였다. 본 연구의 결과는 보험제도에 관한 인식은 낮은 편이고 반면 직무만족도는 높게 나타난 편이다. 하지만 업무스트레스는 상당히 높은 것으로 조사되었다. 또한 직무만족도와 직무스트레스는 한국과 일본 케어워커가 유의미한 차이를 보였으며, 다만 직무만족도와 직무스트레스에 개인의 특성과 업무특성에 따라 의미 있게 나타지 않았다.

• 한국산업보건학회지
• /
• 제26권3호
• /
• pp.293-300
• /
• 2016

Objectives: This study is designed to survey the current status of trade secrets in GHS MSDS circulated in workplaces and indicate problems in the chemical information system. According to the survey results, we suggest management plans including political improvement of the trade secret system for MSDS and technical support to workplaces following enhanced chemical communication. Methods: To review this subject, we selected 153 manufacturers and six importers working in such fields as organic chemical production. We then investigated the retention status of GHS MSDS, application of trade secrets, and the content of trade secret components in MSDSs for mixtures. Results and Conclusions: Within the results, the content of trade secret ingredients was 67.4% (single: 9.0%, mixture: 75.6%). This is an increase compared with the previous results of 45.5% in 2011. Among 59,393 GHS MSDSs, 74.5% had ingredients less than 10% trade secret components, 19.1% had 10-30%, 1.8% had 30-50%, and 4.6% had more than 50%. To settle this issue, we recommend registration or evaluation of trade secrets as implemented in advanced countries. Also, business should be required to undergo regular evaluations of application status for trade secrets in workplace GHS MSDS.

• 한국항공운항학회지
• /
• 제21권4호
• /
• pp.119-125
• /
• 2013

Since year 2001 to the present time, the aircraft accidents and serious incidents in our country have surpassed 150 occurrences. The Boeing has published the statistical summary of commercial jet airplane accidents annually for the past 10 years on the basis of the occurrence categories defined by the CICTT(CAST/ICAO Common Taxonomy Team), and the number of occurrences is in order of loss of control(LOC-I), controlled flight into terrain(CFIT) and runway excursion (RE). Like the NTSB and the EASA, when fatal and non-fatal accidents are aggregated, though fatality rate is low, abnormal runway contact(ARC), system/component failure(SCF-PP/NP), ground handling(RAMP) rank high in the CICTT occurrence categories. With the less occurrence frequency, it is difficult to statistically analyze the aircraft accidents in our country, thus customarily the accidents and the serious incidents on aggregate are consolidated, and the statistical analysis is performed. This study categorizes the accidents and serious incidents to the domestic transportation aircraft in the past 10 years according to the CICTT occurrence categories, that is compared with foreign practices, and the implications have been discussed. From years 2001 through 2010, the accidents to the domestic transportation aircraft occurred in order of system failure(SCF-NP), ARC and power plant failure(SCF-PP), and when the accidents and the serious incidents are consolidated and analyzed, it is verified that a distribution appears similar to the European accident occurrence categories defined from 300 accident occurrence data.

• 한국전기전자재료학회논문지
• /
• 제13권4호
• /
• pp.300-305
• /
• 2000

We have investigated the dielectric and electrical characteristics of palmitic acid(PA) stearic acid(SA) and arachidic acid(AA) Langmuir-Blodgett(LB) films because these fatty acid systems have a same hydrophilic group and a different hydrophobic one(methylene group or alkyl chain length). The fatty acid systems were used as LB films and the status of the deposited films was confirmed by evaluating the transfer ratio the UV absorption and the capacitance. The dielectric characteristics such as the frequency-capacitance characteristics and the dielectric dispersion and absorption characteristics of PA SA and AA through-plane were measured. The relative dielectric constants of PA, SA and AA LB films were about 3.0~4.6, 2.7~3.0 and 2.4~3.0 respectively. That is the relative dielectric constants were decreased in proportion to the chain length of methylene group. Also the dielectric dispersion and absorption of each fatty acid LB films have arisen from spontaneous polarization of dipole polarization in the range of 10$^4$~10$^{5}$ ［Hz］. The conductivity of PA, SA and AA LB films obtained from I-V characteristics were about 9$\times$10$^{-14}$ , 3$\times$10$^{-14}$ and 5$\times$10$^{-15}$ ［S/cm］. respectively. These results have shown the insulating materials and could control the conductivity y changing the length of methylene group. Also we have confirmed that the barrier height of fatty acid systems were almost the same ones obtained from dielectric characteristics.

• ALGAE
• /
• 제23권4호
• /
• pp.295-300
• /
• 2008

Seaweed biomass was estimated using a nondestructive method in the rocky subtidal zones in Munseom, Jeju Island, Korea from July 2006 to April 2008. Seasonal samplings were done at the depth of 1, 5, 10 m using 50 x 50 cm quadrat. Mean biomass was comprised of 2,784 g wet wt m$^{-2}$ and the biomass values varied seasonally from 1,176 g wet wt m$^{-2}$ to 4,217 g wet wt m$^{-2}$ with the highest point in April. Biomass reached maximum at 5 m depth in spring, but was shifted to 10 m depth in summer. Common seaweeds appeared year round in Munseom were Codium minus, Ecklonia cava, Sargassum spp., articulated corallines and Plocamium telfairiae. Among them, E. cava showed the highest biomass (average of 1,288 g wet wt m$^{-2}$), comprising 4% of total biomass. Only 12 species’' biomass covered 98% of total value, which indicated the contribution of few common species to algal community. Seaweed biomass in Munseom represented one of the highest values in coastal regions in Korea.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 춘계종합학술대회
• /
• pp.529-534
• /
• 2002

범세계 해상 조난·안전 시스템(Global Maritime Distress ＆ Safety System： GMDSS)에 따라 DSC(Digital Selective Calling) 전용 수신기, DSC 장치, VHF 송수신기 등이 국제항해에 종사하는 300GT 이상의 모든 선박에 의무적으로 탑재하도록 규정되었다. 또한, 최근에 국제해사기구(International Maritime Organization： IMO)는 GMDSS를 포함한 항해·통신 장비에 EMC 규정을 적용하도록 권고함에 따라 현재 선박에서 사용되는 대부분의 전자가 새로운 규정에 대응해야 하는 문제점에 직면하게 되었다. 본 연구에서는 채널 70 DSC 전용 수신기, DSC 장치, VHF 송수신장치가 집적된 장치에 대하여 예상되는 EMC 규정을 미리 적용 및 분석하여 보고 대처방안을 모색하였다. 시험은 도선 및 방사를 통한 불요파의 측정과 같은 전자파 간섭을 비롯하여 전압, 주파수 변위에 대한 내성과 정전기 방전에 대한 내성을 포함한 다양한 전자파 감응성 시험 등이 적용되었고 이에 따른 국내외 제품의 전원 및 접지에 대한 문제점을 파악할 수 있게 되었다.

• 한국전기전자재료학회논문지
• /
• 제26권1호
• /
• pp.44-48
• /
• 2013

Niobium oxide($Nb_2O_5$) films were deposited on p-type Si wafers at room temperature using in-line pulsed-DC magnetron sputtering system with various frequencies. The different duty ratios were obtained by varying the frequency of pulsed DC power from 100 to 300 kHz at the fixed reverse time of $1.5{\mu}s$. From the thickness of the sputtered $NbO_x$ films, it was possible to obtain much higher deposition rate in case of pulsed-DC sputtering than RF sputtering. However, the similar leakage currents and structural characteristics were obtained from the metal-insulator-semiconductor(MIS) structure fabricated with the $NbO_x$ films and the x-ray photoelectron spectroscopy(XPS) results in spite of the different deposition rates. From the experimental results, the $NbO_x$ films sputtered by pulsed-DC sputtering are expected to be used in the fabrication process instead of RF sputtering.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 춘계종합학술대회
• /
• pp.951-954
• /
• 2005

본 논문은 BLCD 모터를 사용하여 복합연막탄 선회구동 장치를 정밀 제어하는 시스템 설계 및 알고리즘 개발을 그 목적으로 하고 있다. 복합연막탄은 적위협의 시계를 가리는 역할을 하므로 매우 짧은 시간 내에 적 위협을 감지하고 그에 대응해야 하므로 빠른 응답성을 갖도록 설계 되어야 한다. 따라서 300Hz ${\sim}$ 500Hz의 빠른 전류 응답성을 가지는 전류 제어기를 설계하였으며 기존에 많이 사용되던 공간벡터 PWM을 사용하지 않고 MIX-MAX PWM 방식을 사용하여 연산속도를 향상 시켰다. 연막탄이 정확히 발사되기 위한 정밀 위치제어기를 제안하였으며 PC기반의 모니터링 프로그램을 통해 전류, 전압, 위치, 속도 등의 파라메터를 그래프로 확인 가능하도록 구현하였다. 부동소숫점 방식의 고속 DSP인 TMS320VC33을 사용하여 제어기를 구성 하였으며 PWM발생부는 CPLD인 EPM7128을 사용하여 구현 하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1645-1646
• /
• 2006

Micro ElectroMechanical Systems (MEMS) 기술을 이용한 초미세 유체 제어 시스템 (마이크로 펌프, 마이크로 밸브, 마이크로 채널, 마이크로 믹서 등)은 화학, 생명분야의 DNA 분석, 항원-항체 분석, 질병의 진단 등에 사용되는 lab-on-a-chip, micro total analysis system ($\mu$-TAS) 등에서 화학 및 바이오 유체를 제어하는 분석 시스템의 일부분으로서 사용되며 필수적으로 요구된다. 본 논문에서는 이러한 microchip을 구현하기 위해 초미세 유체 제어 소자인 마이크로 펌프와 밸브를 같은 기관 위에 polydimethylsiloxane (PDMS)와 indium tin oxide (ITO)-Glass를 사용하여 동일한 구조로 집적 하였다. 마이크로 펌프의 pumping rate은 인가 직류 펄스 전력의 주파수와 duty 비를 변화시켜 최적화하였다. 직류 펄스 전력 500 mW를 인가하였을 때 주파수 2 Hz, duty 비 7 %에서 약 $1.05{\mu}l/min$의 최대 유량이 측정되었다. 마이크로 밸브는 ITO 히터에 전력을 인가함으로서 유량의 on/off 제어가 잘 됨을 확인할 수 있었고 유체를 closing하기 위해 필요한 전력은 약 300 mW이다.

• 소성∙가공
• /
• 제21권1호
• /
• pp.13-18
• /
• 2012

During warm forging, materials are formed in the temperature range of $300^{\circ}C\sim900^{\circ}C$. In this temperature range, the friction between the forging die and the material is very high and has a negative effect on the forming process causing severe die wear and possible defects in the component because of stick-slip. Thus, lubrication characteristics are a very important factor for productivity during warm forging. In this paper, ring compression experiments were conducted to estimate the friction factor between the die and the materials as the main factor in characterizing the lubricant. Also, ring tests using normal graphite power as a lubricant coating system were compared with tests using nano graphite powder. The results confirm that the nano graphite is superior to the normal graphite in view of its lubricating effect. In addition, the friction factor (m) was estimated with respect to the amount of the nano graphite content in the lubricant. With 10 % nano graphite the friction factor had the lowest value as compared to other amounts. It can be concluded that the amount of the nano graphite in the coating system can be optimized to obtain the best lubrication condition between the die and the material using ring test experiments.