• Journal of Sensor Science and Technology
• /
• v.28 no.4
• /
• pp.205-215
• /
• 2019

A flexible polyvinylidene fluoride (PVDF)/polydimethylsiloxane (PDMS) composite prototype with high piezoelectricity and force sensitivity was constructed, and its huge potential for applications such as biomechanical energy harvesting, self-powered health monitoring system, and pressure sensors was proved. The crystallization, piezoelectric, and electrical properties of the composites were characterized using an X-ray diffraction (XRD) experiment and customized experimental setups. The composite can sustain up to 100% strain, which is a huge improvement over monolithic PVDF fibers and other PVDF-based composites in the literature. The Young's modulus is 1.64 MPa, which is closely matched with the flexibility of the human skin, and shows the possibility for integrating PVDF/PDMS composites into wearable devices and implantable medical devices. The $300{\mu}m$ thick composite has a 14% volume fraction of PVDF fibers and produces high piezoelectricity with piezoelectric charge constants $d_{31}=19pC/N$ and $d_{33}=34pC/N$, and piezoelectric voltage constants $g_{31}=33.9mV/N$ and $g_{33}=61.2mV/N$. Under a 10 Hz actuation, the output voltage was measured at 190 mVpp, which is the largest output signal generated from a PVDF fiber-based prototype.

• Korean Journal of Organic Agriculture
• /
• v.29 no.3
• /
• pp.285-300
• /
• 2021

On January 1, 2020, the liquor tax for beer and takju was reorganized from the ad valorem tax to the specific tax. The purpose of the reorganization of the liquor tax announced by the National Tax Service is to improve the quality of the liquor and to resolve unreasonable discrimination between domestic and imported liquor. However, it is necessary to determine whether the National Tax Service's standard for levying the liquor tax is appropriate for the purpose. In this study, the change in the liquor industry is estimated due to the reorganization of the liquor tax using Hicks net price elasticity. In addition, the specific tax for each of the liquors and the alcohol content derived from the social cost minimization model is compared. The main findings are as follows. First, when the liquor tax of beer and takju is converted to the specific tax, social costs increase, and social welfare decrease. Second, if all the liquors are converted to the specific tax, social costs decrease. Third, when comparing specific tax by each of the liquors and the alcohol content according to the social cost minimization model, The specific tax by alcohol content can be considered more appropriate in terms of social cost and the stakeholders in the liquor industry.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.6_3
• /
• pp.1269-1278
• /
• 2023

This paper presents an operational technique that can secure the stability of DC-Grid centering on MG operated based on ESS in multiple MG where three DC-based microgrid(MG) are interconnected. MG1(PV 600kWp, ESS 1.5MWh) has an 830Vdc grid voltage, MG2(PV 300kWp, ESS 1.1MWh) and MG3(PV 100kWp, ESS 500kWh) are DC-based MG with a 750Vdc grid voltage, and MG1 and MG2, 3 are linked by separate DC/DC converters (BTB). In order to keep different grid voltages stable, the power transmission capacity between MG1 and two MG(MG2, MG3) connected with an independent BTB converter was adjusted to secure the overall stability of the system, and this was verified by confirming that the surplus capacity of ESS was maintained in actual operation.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2001.11a
• /
• pp.143-160
• /
• 2001

최근 들어 무선인터넷 및 모바일 컴퓨팅 기술의 급속한 발전과 함께 향후 그 수요가 폭발적으로 증대될 것으로 예상되는 분야가 위치기반서비스(LBS, Location Based Service) 기술이다. 이동통시산업이 발달한 미국 및 유럽의 선진국에서는 지난 수년에 걸쳐 지속적으로 축적되어 온 정보기술을 통하여 현재 수많은 LBS 관련 기술개발이 활발히 진행되고 있다. 1999년 미국의 FCC(미연방통신위원회)는 무선 E119 규칙을 제정하였는데, 이 규칙은 LBS를 주목하게 한 결정적인 계기가 되었다. FCC는 미국내의 망 사업자들이 2001년 10월까지 이동전화 사용자가 응급 호출(911)을 하였을 때 67%는 100M 이내의 위치오차로, 95%는 300M 이내의 위치오차로 응급호출자의 위치정보를 제공해야 한다는 규정을 제정했다. 이때부터 각종 관련 회사들이 생겨나기 시작했으며, 사람들이 LBS에 관심을 가지기 시작하였다. 국내에서도 이동통신사업자 및 IMT-2000 사업자를 중심으로 LBS 도입을 적극 준비하고 있는 상황이다. 그러나 위치정보라는 것은 오래 전부터 사람들이 알고있던 사항이다. 이미 GPS라는 것을 이용하여 국방분야, 환경분야, 교통 및 물류 분야에서 많이 활용되고 있었기 때문이다. 그런데 왜 같은 위치정보를 활용하는 분야인데 LBS는 이토록 많은 관심을 불러일으키는가? 그것에 대한 답변은 바로 위치정보가 이동통신망과 연결되면서 대중적이고 일반적인 서비스가 가능해졌기 때문이다. 특히, LBS는 GIS가 정보통신 기술과 융합되면서 앞으로 추구해야 할 차세대 정보기술 분야라는 점에서 그 의미는 더 크다고 할 수 있다. 평균(平均) 0.322였다. 그리고 RaA를 모핵종(母核種)으로 가정(假定)했을 때 각핵종간(各核種間)의 방사평형비(放射平衡比)는 대개 $C_1>C_2>C_3$인 것으로 나타났다. 여기서 $C_1,\;C_2$ 및 $C_3$는 각각 RaA, RaB 및 RaC의 농도(濃度)를 나타낸다.0cm 깊이에서는 Pythium균(菌)과 Fusarium균(菌)을 제외(除外)하고 모두 14일간(日間)에 사멸(死滅)하였다. 6. 최고(最高)에 달(達)했다가 최저(最低)에 이르는 온도(溫度)의 반복적(反復的)인 파동(波動)이 있는 것에서 없는 것보다 단시간(短時間)에 사멸(死滅)하였다. 이상(以上)의 결과(結果)에서 볼 때 하기고온기(夏期高溫期)의 재배(栽培) 휴한기(休閑期)에 PVC film을 사용(使用)하여 하우스를 밀폐(密閉)하거나 턴널을 만들어서 태양열(太陽熱)을 이용(利用)한 토양소독(土壤消毒)의 가능성(可能性)이 충분(充分)히 있는 것으로 생각된다.종합적(綜合的)으로 볼 때, diazinon 과 decamethrin의 처리(處理)는 포장(圃場)에서 벼멸구의 산란력(産卵力)과 성충수명을 증대(增大)시키고, 식이활동(食餌活動)을 촉진(促進)함으로서 벼멸구의 resurgence를 유발(誘發)하고 아울러 수도체(水稻體)의 hopperbun을 가속화시킬 가능성(可能性)이 있음을 알 수 있었다.는 점차 약하여 졌으나 catalase, invertase는 그 활성도가 일단 숙성중기에 높아졌다가 낮아졌다.n 이 pH 4.2이고 temperature는 $60^{\circ}C$이었다. 그리고

• Journal of Bio-Environment Control
• /
• v.29 no.4
• /
• pp.399-405
• /
• 2020

Recently, it is difficult to produce uniform scions and rootstocks with high quality in a greenhouse due to weather extremes. The closed transplant production system is useful for producing scions and rootstocks with desirable morphological characteristics by environment control regardless of weather outside. In this study, we investigated transpiration rates and growth of cucumber and tomato scions and rootstocks grown under different light intensity conditions for precise irrigation control in a closed transplant production system. Hanging system to measure continuously the weight of plug tray consisting of seedlings and substrate with load-cell was installed in each growing bed. Using this system, we confirmed initial wilting point of cucumber and tomato seedlings, and conducted subirrigation when moisture content of substrate was not below 50%. The irrigation time of cucumber scions and rootstocks were 7 and 6 days after sowing, respectively. In tomato scions and rootstocks grown under PPF (photosynthetic photon flux) 300 μmol·m^-2·s^-1, the irrigation time were 5, 8, 11, and 13 days after sowing. Increasing light intensity increased transpiration rates and differences of transpiration rates by light intensity was higher in tomato seedlings. The growth of cucumber and tomato seedlings was promoted by increasing light intensity, especially, hypocotyl elongation and stem thickening was affected by light intensity. Cumulative transpiration rate of plug tray in cucumber and tomato seedlings was increased by increasing light intensity, and daily transpiration rate per seedling was regressed by 1st-order linear equation with high correlation coefficient. Estimation of transpiration rates by weighing continuously plug tray of vegetable seedlings can be useful to control more accurately irrigation schedule in a closed transplant production system.

• Restorative Dentistry and Endodontics
• /
• v.31 no.6
• /
• pp.477-484
• /
• 2006

The purposes of this study were to compare the apical terminus width of simulated curved root canal prepared with three NiTi file systems used by undergraduates for evaluation the effects of flute angle and pitch or radial land on reducing screw-in effect and to determine more safe NiTi file system for inexperienced operators. Fifty inexperienced undergraduate students prepared 150 simulated curved root canals in resin blocks with three NiTi file systems ; ProFile$^{(R)}$, Hero Shaper$^{(R)}$, K3$^{TM}$. The electric motor set at a speed of 300 rpm and torque of 30 in a 16 : 1 reduction handpiece was used. The simulated root canal was prepared to ISO #25 sizes with each file system. The scanned images of pre- and post-instrumented canal of resin block were superimposed. To evaluate the screw-in effect of three NiTi file systems, apical terminus width of root canal was measured from superimposed images and statistical analysis was performed. There were significant differences in three NiTi flle systems. ProFile$^{(R)}$ had significantly smaller width than Hero Shaper$^{(R)}$ and K3$^{TM}$"" (P < 0.05), but no significant difference was observed between K3$^{TM}$ and Hero Shaper$^{(R)}$. Under the condition of this study, active file system (Hero SHaper$^{(R)}$, K3$^{TM}$) with variable pitch and helical angle had more screw-in effect than passive file system (ProFile$^{(R)}$) with constant pitch and helical angle. It seems that the radial lands play more important role in reducing screw-in effect.

• Journal of Venture Innovation
• /
• v.3 no.2
• /
• pp.95-109
• /
• 2020

The source of value-added creation in modern times has been transformed from material to man's value-added generating power, and ownership of the means of production has been converted from a particular landlord, capitalist to a person with value-added capacity, and a system of capital participation is needed beyond the profit-sharing system or performance incentive system in which workers of an enterprise participate in simple profits if they significantly increase the added value of the company. It is also necessary to introduce our private stock system as a means of addressing the problem of capital bias and for the stable development of capitalism. The purpose of Employee Stock Ownership Plans is to improve the economic and social status of workers and promote labor-management cooperation by allowing workers to acquire and hold shares of the stock company in which the employee ownership association is established through the employee ownership association, but the reality is that our stock ownership system has failed to achieve its purpose due to insufficient protection against the employee. In terms of welfare, the acquisition of our company shares should include active government support for the welfare of workers' ownership on a social welfare level rather than on the logic of the capital market, and in terms of investment, it would not be appropriate to apply the regulation for investor protection to see workers' acquisition of our company shares as 'investment' in the view of workers' willingness to own shares on the stock market. Therefore, as a way to support and deregulate employee's stock acquisition, 1. Expanding direct support, such as tax support, 2. As employee's stock ownership association is being discussed as a division's nature, it is less effective in terms of various management, not investment, and 3. Those who own stocks with 1% of the company's shares and 300 million won in face value will be classified as major shareholders. As a way to reduce the risk of management of our company owners and cooperative funds, As a measure to reduce the risk of management of our company owners and cooperative funds, only our employee shareholders' association shall manage the fund in a long-term deposit, and even though our employee's stock is managed by the association or company after the end of the deposit period, the management of each employee shall be allowed and In terms of improving the utilization of our company's stock and fund, 1. Employee's stockholders are prohibited from lending during the deposit period, but it is necessary to improve profitability by allowing them to borrow under strict restrictions, 2. It is necessary to make the use of the employee's welfare funds available for the preservation of losses, and to stipulate the redemption obligations of unlisted companies in order to improve the redemption system of our company.

• The Journal of the Korea Contents Association
• /
• v.14 no.11
• /
• pp.175-185
• /
• 2014

This study is to develop a fatigue scale for the private security guard for a private security guard to effectively manage fatigue were tested for validity and reliability. To achieve that, this study employed purposive sampling to draw 300 samples among private security guards working for the security firms registered in Seoul District Police Office as of 2014, and used 259 samples for final analysis. Fatigue scale was developed on the basis of the scale development methods and procedures in previous studies. For data processing, SPSSWIN 18.0 program was applied to conduct exploratory factor analysis, reliability analysis, and correlation analysis, and AMOS 18.0 program was employed to conduct confirmatory factory analysis. This study came to the following conclusion. First, the validity of the fatigue measurement tool was high. In other words, content validity was high, and construct validity was also high. The factor loading of exploratory factor analysis was .452, and the standard value of confirmatory factor analysis was .403. Therefore, the tool satisfied the basis value of fit index. The sub categories of fatigue, finally drawn from validity test, were mental fatigue, nervous system dysfunction, physical deformity, and exhaustion. Secondly, the reliability of the fatigue measurement tool was high. In other words, according to item analysis, the correlation between items and their sub categories, and between items and total score was more than .602, relatively high. And the reliability coefficient (Cronbach's ${\alpha}$) was high, or more than .658. Fatigue Scale tool will be developed by private security guards in the present study is to measure the validity and reliability verification is clearly tired of the private security guards than the tools that are used in other studies in the existing area.

• Journal of Pharmaceutical Investigation
• /
• v.35 no.6
• /
• pp.417-422
• /
• 2005

This study was aimed to design and formulate the moisture-activated patches containing ofloxacin and lidocaine for antibacterial and local anesthetic action. The solubility of lidocaine at $32^{\circ}C$ in various vehicles decreased in the rank order of PG $759.5{\pm}44.5\;mg/mL$ > PGL > IPM > PEG 300 > PEG 400 > Ethanol > PGMC > DGME > PGML > OA > $Captex^{\circledR}\;300$ > $Captex^{\circledR}\;200$ > water $(4.0{\pm}0.1\;mg/mL)$. Ofloxacin revealed very low solubility, which the highest solubility was obtained from PEG 400 $(18.7{\pm}6.3\;mg/mL)$ among the vehicles used. The addition of lactic acid increased the solubility of ofloxacin dramatically; the solubility at 5% lactic acid was $133.7{\pm}9.7\;mg/mL$. As $2-hydroxypropyl-{\beta}-cyclodextrin$ was added at the concentrations of 40, 80, 120, 160 and 200 mM, the solubilities of lidocaine and ofloxacin were enhanced up to three and two times, respectively, with concentration-dependent pattern. Gel intermediates for filmtype patches were prepared with mucoadhesive polymer, viscosity builders, lidocaine or ofloxacin at pH values from 5 to 7. Gels were cast onto a release liner and dried at room temperature. Dried patch was attached onto an adhesive backing layer, thus forming a patch system. Patches containing a single drug component were characterized by in vitro measurement of drug release rates through a cellulose barrier membrane. The release study was carried out at $37^{\circ}C$ using a Franz-type cell. Receptor solutions were isotonic phosphate buffers (pH 7.4). Samples $(100\;{\mu}L)$ were taken over 24 hours and quantitated by a verified HPLC method. The releases from all tested were proportional to the square root of time. The release rates were 0.9, 157.3 and $281.7\;{\mu}g/cm^{2}/min^{1/2}$ for the lidocaine patches and 19.8,37.2 and $50.7\;{\mu}g/cm^{2}/min^{1/2}$ for the ofloxacin patches at the concentrations of 0.3, 0.5 and 1 %, respectively. The release rates were dose dependent in both drug patches $(R^{2}\;=\;0.9077\;for\;lidocaine;\;R^{2}\;=\;0.9949\;for\;ofloxacin)$ and those were also thickness-dependent $(R^{2}\;=\;0.9246\;for\;lidocaine;\;R^{2}\;=\;0.9512\;for\;ofloxacin)$.

• Journal of KIISE:Software and Applications
• /
• v.35 no.12
• /
• pp.780-788
• /
• 2008

Modeling hand poses and tracking its movement are one of the challenging problems in computer vision. There are two typical approaches for the reconstruction of hand poses in 3D, depending on the number of cameras from which images are captured. One is to capture images from multiple cameras or a stereo camera. The other is to capture images from a single camera. The former approach is relatively limited, because of the environmental constraints for setting up multiple cameras. In this paper we propose a method of reconstructing 3D hand poses from a 2D input image sequence captured from a single camera by means of Belief Propagation in a graphical model and recognizing a finger clicking motion using a hidden Markov model. We define a graphical model with hidden nodes representing joints of a hand, and observable nodes with the features extracted from a 2D input image sequence. To track hand poses in 3D, we use a Belief Propagation algorithm, which provides a robust and unified framework for inference in a graphical model. From the estimated 3D hand pose we extract the information for each finger's motion, which is then fed into a hidden Markov model. To recognize natural finger actions, we consider the movements of all the fingers to recognize a single finger's action. We applied the proposed method to a virtual keypad system and the result showed a high recognition rate of 94.66% with 300 test data.