• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.6
• /
• pp.496-500
• /
• 2019

In this study, we investigate the effect of an Sb-deficiency on the thermoelectric properties of double-filled n-type skutterudite ($In_{0.05}Yb_{0.15}Co_4Sb_{12-x}$). Samples were prepared by encapsulated induction melting, consecutive long-time annealing, and finally spark plasma sintering processes. The Sb-deficient sample contained a $CoSb_2$ secondary phase. Both the double-filled n-type skutterudite pristine and Sb-deficient samples showed metallic behavior in electrical conductivity with increasing temperature. The carrier concentration of the Sb-deficient sample decreased compared with that of the pristine sample. Due to a decrease in carrier concentration, the Sb deficient sample showed decreased electrical conductivity and an increased Seebeck coefficient compared with the conductivity and coefficient of the pristine sample. Furthermore, the Sb deficient sample showed an increase in the power factor (${\sigma}{\cdot}S^2$); the power factor maximum shifted to athe lower temperature side than ones of the pristine sample. As a result, the Sb-deficient sample represents an improved average figure of merit (ZT) and a $ZT_{max}$ temperature lower than that of the pristine sample. Therefore, we propose that Sb-deficient double-filled n-type skutterudite thermoelectric material ($In_{0.05}Yb_{0.15}Co_4Sb_{12-x}$) be used in the 573~673 K temperature range.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.104-104
• /
• 2018

이수안전도의 기준이 되는 갈수량에 대해 기후변화 시나리오에 따른 전망을 제시하였다. 충주 댐 유역을 대상으로 기준기간(1986~2000년)에서의 기상청의 관측 기상자료와 IPCC 보고서의 RCP 4.5/8.5 시나리오를 대상으로 CMIP5(Coupled Model Intercomparison Project Phase 5)에서 제공하는 기후변화 자료 중 5개의 모델(ACCESS1.3 CanESM2, CNRM-CM5, GFDL-ESM2G, HadGEM2-AO)의 기준기간과 미래기간(2011~2100년)의 기상자료를 수집하였다. 기후변화 자료는 정상성/비정상성 분위사상법과 베이지안 모델 평균기법을 통해 불확실성과 통계적 오차를 저감하였다. 미래기간에서, 강우는 RCP 4.5에서 1.74mm/year, RCP 8.5에서 3.22mm/year, 실제증발산은 RCP 4.5에서 1.09mm/year, RCP 8.5에서 1.78mm/year의 증가율을 보였다. 실제증발산을 입력자료로 활용할 수 있도록 IHACRES모델의 CMD(Catchment Moisture Deficit) 비선형 모듈의 매개변수를 변이하여 유효강우량 산정 과정을 개선하였다. 기준기간에서 관측유량자료와 IHACRES의 시뮬레이션을 통해 산정된 유량자료의 R-squared는 0.65이다. 기준기간에서의 매개변수를 고정하여 미래기간의 유량을 산정하고 유황분석을 통해 갈수량 전망하였다. 유량은 RCP 4.5에서 4.41MCM/year, RCP 8.5에서 9.66MCM/year의 증가율을 보였다. 갈수량은 RCP 4.5에서 0.30MCM/year, RCP 8.5에서 -0.47MCM/year의 증감율을 보였다. 연간 강수량 대비 실제증발산의 비율의 추세분석 결과, RCP 4.5에서는 홍수기에는 0.014%/year, 비홍수기에는 0.027%/year의 증가율을 보이며 거의 변화가 없는 추세를 확인할 수 있었다. RCP 8.5의 홍수기에는 -0.042%/year, 비홍수기에서는 0.167%/year의 증감율을 보이며 홍수기에는 실제증발산에 비해 강수량의 증가가 확연히 보였으며 비홍수기에는 강수량에 비해 실제증발산의 증가가 뚜렷이 확인되었다. RCP 8.5에서 비홍수기의 강수량 대비 실제증발산의 증가가 갈수량의 감소로 반영된 것을 확인할 수 있었다. 미래기간의 RCP 4.5/8.5에서 실제증발산의 증가로 인하여 강수량이 증가함에 따라 유입량이 증가함에도 불구하고 갈수량의 증가로 이어지지 않았다. 미래 갈수량의 감소는 하천의 건전성과 이수안전도의 위협이 될 수 있다.

• Geophysics and Geophysical Exploration
• /
• v.6 no.4
• /
• pp.199-206
• /
• 2003

Characteristics of the static shift are discussed by comparing the three-dimensional MT inversion with/without static shift parameterization. The galvanic distortion by small-scale shallow feature often leads severe distortion in inverted resistivity structures. The new inversion algorithm is applied to four numerical data sets contaminated by different amount of static shift. In real field data interpretations, we generally do not have any a-priori information about how much the data contains the static shift. In this study, we developed an algorithm for finding both Lagrangian multiplier for smoothness and the trade-off parameter for static shift, simultaneously in 3-D MT inversion. Applications of this inversion routine for the numerical data sets showed quite reasonable estimation of static shift parameters without any a-priori information. The inversion scheme is successfully applied to all the four data sets, even when the static shift does not obey the Gaussian distribution. Allowing the static shift parameters have non-zero degree of freedom to the inversion, we could get more accurate block resistivities as well as static shifts in the data. When inversion does not consider the static shift as inversion parameters (conventional MT inversion), the block resistivities on the surface are modified considerably to match possible static shift. The inhomogeneous blocks on the surface can generate the static shift at low frequencies. By those mechanisms, the conventional 3-D MT inversion can reconstruct the resistivity structures to some extent in the deeper parts even when moderate static shifts are in the data. As frequency increased, however, the galvanic distortion is not frequency independent any more, and thus the conventional inversion failed to fit the apparent resistivity and phase, especially when strong static shift is added. Even in such case, however, reasonable estimation of block resistivity as well as static shift parameters were obtained by 3-D MT inversion with static shift parameterization.

• Journal of Technology Innovation
• /
• v.28 no.4
• /
• pp.127-150
• /
• 2020

The World Health Organization (WHO) declared the third pandemic in history after the Hong Kong flu and swine flu. The outbreak of Corona 19 dramatically reduced exchanges between countries, while rapid contagion created a time gap in economic fluctuations by country. In January 2020, the trade dispute between the US and China entered into a consensus phase, but the economic decoupling phenomenon caused by Corona 19 made it difficult for China to balance trade with the US and made it difficult to comply with the terms of the trade dispute agreement between the US and China. President Trump attributed the responsibility for the spread of Corona 19 to China, and pointed out that the cause of the economic downturn was the infringement of Chinese trade secrets and illegal copies, and protectionism arose. As a result, China protested fiercely, and the conflict with the United States deepened. The US has declared trade sanctions on Huawei and SMIC, which are key companies in China's semiconductor industry, and is predicting the risk of a disconnection of the semiconductor value chain between the US and China. The separation of the value chain of the semiconductor industry has the potential to have a big impact on the semiconductor industry, a structure that is highly specialized and monopolized by certain countries and companies in the value chain. This paper aims to deal with the risk of disconnection in the semiconductor value chain between the US and China reignited by Corona 19, the impact and change of the global semiconductor industry value chain, and the response strategies of Korean semiconductor companies.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.744-753
• /
• 2021

This study suggests ways to improve the standard test method and judgment criterion for the "Eco-toxicity Test" based on the rules and regulations provided in 'performance and qualifying test standards for marine pollution prevention materials and chemicals' in the Republic of Korea. Compared with the relevant references of other countries, this study attempted to find the limitations in the existing standards. As for the growth inhibition test of algae using Skeletonema costatum as an indicator, applying comparative analysis to measure specific growth rates, together with statistical analysis, instead of applying current methods, judged by the appearance of colors from the culture medium was suggested. Considering the exponential growth phase of the test species, the test duration was suggested to be reduced to less than four days. For the test with fish as an indicator, resetting the appropriate body size was suggested to, show consistent sensitivity against chenicals applied during testing. Furthermore, it is necessary to consider the criteria needs, which should be established in reasonable and objective ways. For the testing species, marine rotifer, Brachionus plicatilis could be a replacement for Artemia sp., and a bivalve for fish in the test. To improve the performance effectiveness of the "Eco-toxicity test", it is worth considering the designation of accredited testing institutes, by placing it in the same loop. Thus it is also expected to have a reliable management system in place, having the capacity of cost calculation properly and adjusting testing items if required.

• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3367-3378
• /
• 2021

The design phase and safety assessment of Generation IV liquid metal-cooled fast reactors calls for the improvement of fuel pin performance codes, in particular the enhancement of their predictive capabilities towards uranium-plutonium mixed oxide fuels and stainless-steel cladding under irradiation in fast reactor environments. To this end, the current capabilities of fuel performance codes must be critically assessed against experimental data from available irradiation experiments. This work is devoted to the assessment of three European fuel performance codes, namely GERMINAL, MACROS and TRANSURANUS, against the irradiation of two fuel pins selected from the SUPERFACT-1 experimental campaign. The pins are characterized by a low enrichment (~ 2 wt.%) of minor actinides (neptunium and americium) in the fuel, and by plutonium content and cladding material in line with design choices envisaged for liquid metal-cooled Generation IV reactor fuels. The predictions of the codes are compared to several experimental measurements, allowing the identification of the current code capabilities in predicting fuel restructuring, cladding deformation, redistribution of actinides and volatile fission products. The integral assessment against experimental data is complemented by a code-to-code benchmark focused on the evolution of quantities of engineering interest over time. The benchmark analysis points out the differences in the code predictions of fuel central temperature, fuel-cladding gap width, cladding outer radius, pin internal pressure and fission gas release and suggests potential modelling development paths towards an improved description of the fuel pin behaviour in fast reactor irradiation conditions.

• Publications of The Korean Astronomical Society
• /
• v.36 no.3
• /
• pp.79-95
• /
• 2021

This study aims to develop a restoration model of an armillary sphere of Tongcheon-ui (Pan-celestial Armillary Sphere) by referring to the records of Damheonseo (Hong Dae-Yong Anthology) and the artifact of an armillary sphere in the Korean Christian Museum of Soongsil University. Between 1760 and 1762, Hong, Dae-Yong (1731-1783) built Tongcheon-ui, with Na, Kyung-Jeok (1690-1762) designing the basic structure and Ann, Cheo-In (1710-1787) completing the assembly. The model in this study is a spherical body with a diameter of 510 mm. Tongcheon-ui operates the armillary sphere by transmitting the rotational power from the lantern clock. The armillary sphere is constructed in the fashion of a two-layer sphere: the outer one is Yukhab-ui that is fixed; and the inner one, Samsin-ui, is rotated around the polar axis. In the equatorial ring possessed by Samsin-ui, an ecliptic ring and a lunar-path ring are successively fixed and are tilted by 23.5° and 28.5° over the equatorial ring, respectively. A solar miniature attached to a 365-toothed inner gear on the ecliptic ring reproduces the annual motion of the Sun. A lunar miniature installed on a 114-toothed inner gear of the lunar-path ring can also replay the moon's orbital motion and phase change. By the set of 'a ratchet gear, a shaft and a spur gear' installed in the solstice-colure double-ring, the inner gears in the ecliptic ring and lunar-path ring can be rotated in the opposite direction to the rotation of Samsin-ui and then the solar and lunar miniatures can simulate their revolution over the period of a year and a month, respectively. In order to indicate the change of the moon phases, 27 pins were arranged in a uniform circle around the lunar-path ring, and the 29-toothed wheel is fixed under the solar miniature. At the center of the armillary sphere, an earth plate representing a world map is fixed horizontally. Tongcheon-ui is the armillary sphere clock developed by Confucian scholars in the late Joseon Dynasty, and the technical level at which astronomical clocks could be produced at the time is of a high standard.

• Korea Science and Art Forum
• /
• v.37 no.2
• /
• pp.205-217
• /
• 2019

This study began with the focusing the growth of importance of cultural marketing and its successes by applying to branding in a phase in which the cultural production era has arrived after the industrial production era. This study aimed to reveal the effect of cultural marketing, which are used as marketing strategy in the tourism field, on brand attitude and awareness. Therefore, this study tried to investigate the brand equity and attitude in accordance with the cultural marketing factors by survey Chinese tourists visiting Korea. The result and contents of the study are as follows. First, it was confirmed that the research question on the possibility of market segmentation in accordance with cultural marketing factors; the market segments were classified as Cluster 1 general involvement perceived group, Cluster 2 high involvement perceived group, Cluster3 middle involvement perceived group. Second, it revealed significant differences on brand attitude among the segments; Cluster 2 showed high brand attitude and Cluster 3 showed average level on brand attitude. Third, it found a statistically significant differences in the perception of brand equity including perceived quality, brand awareness and brand image of tourism destination. In conclusion, this study was able to identify market segments in accordance with cultural marketing factors of tourism destination and revealed significant differences in the segments by brand attitude and brand equity. This could provide practical implication that various cultural marketing activities to generate positive results on brand equity and brand attitude and cultural marketing strategies is also needed to increase foreign tourists' awareness of these cultural marketing activities.

• Korean Journal of Psychosomatic Medicine
• /
• v.29 no.2
• /
• pp.77-85
• /
• 2021

Breast cancer is the most prevalent oncological disease among women. Various psychosocial distress is common at the diagnosis, treatment, and posttreatment phase of breast cancer. For the treatment of breast cancer, not only medical treatment but also psychosomatic integrative care will be needed. Patients with breast cancer may lead to increased vulnerability to stress, adjustment disorder, anxiety disorder, and depressive disorder, and these psychiatric diseases and conditions are associated with recurrence or exacerbation of breast cancer. Psychosocial treatment of anxiety and depression could increase the quality of life of patients and decrease the recurrence and progression of breast cancer. In this article, we reviewed 5 clinical breast cancer survivorship guidelines focused on psychosomatic integrative care including psychosocial treatment and alternative treatment for psychosocial distress. Because 5 treatment guidelines were using various definitions of evidence, we confirmed evidence of various psychosocial treatments for patients with breast cancer based on the definition of evidence by the US Preventive Service Task Force (USPSTF) guideline. We also reviewed the effect size of psychosocial treatment for anxiety, depression, mood, and quality of life in patients with breast cancer. This article discusses the barrier to the delivery of psychosomatic integrative care and suggests integrative care planning for breast cancer. Multi-disciplinary teams, patient's needs assessment, information technology support, patient and caregiver engagement, planned periodic monitoring of psychosocial distress by a psychosomatic specialist or consultation-liaison psychiatrist are recommended as key features of a psychosomatic integrated care plan.

• Korean Journal of Psychosomatic Medicine
• /
• v.29 no.2
• /
• pp.207-212
• /
• 2021

Anti-N-methyl-D-aspartate receptor (Anti-NMDAR) encephalitis is a neuroinflammatory disease mediated by autoantibodies to NMDAR. In the initial clinical stages of anti-NMDAR encephalitis, psychiatric symptoms like delusions, perceptual disturbances, and disorganized speech or behaviors are pronounced even without obvious neurological symptoms. Early treatments like immunotherapy and/or tumor removal are central to good clinical outcomes. Hence, it is important to diagnose early anti-NMDAR encephalitis, distinguishing it from mental disorder. In the present case study, the authors described psychiatric symptoms assessed with Positive and Negative Syndrome Scale (PANSS) of Ms. A, a 26-year-old woman, in the early phase of anti-NMDAR encephalitis. We will discuss the characteristic psychopathology of anti-NMDAR encephalitis toward prompt diagnosis and treatment. Ms. A showed a higher negative subscale score than positive one on the PANSS. Compared with mental disorder, negative symptoms and cognitive impairment would be more prominent in the early stage of anti-NMDAR encephalitis. Rituximab and teratoma removal were effective, and quetiapine showed good tolerability. It is recommended to evaluate anti-NMDAR encephalitis when negative symptoms, cognitive impairment, catatonia, changes in consciousness level, and neurological symptoms are observed, especially in young women.