• Journal of Advanced Navigation Technology
• /
• v.16 no.1
• /
• pp.158-162
• /
• 2012

In this paper, we propose a wireless modem, which used OFDM/64QAM method and the ISM band with 2.4GHz radio frequency. In this paper proposed the case of a modem, the main program to process the baseband processor, processing speed, operating voltage, and reliability should be ensured. So we have designed with Ralink's RT2870, witch was used for Wi-Fi solution. The RT2870 provides full support for wireless LAN standard, and supports various modulation formats, 2.4GHz and 5GHz bands, both of which support chip. In this paper, we also output the modulated signal transmitted wirelessly to the 2.4GHz band RF RT2850 chip processing was applied and using 40MHz band 2.422 ~ 2.462GHz wireless bands were designed to occupy. By applying bi-directional transmission between wireless transmitter and receiver, it can be effectively connected with any kinds of wireless LAN with 2.4GHz ISM band. Therefore it could economically be used as peripheral equipments for POS system or personal wireless device based on Android platform.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.2 s.117
• /
• pp.118-125
• /
• 2007

Harmonic band of bandpass filter(BPF) is suppressed using coupled mushroom structure. Between double positive (DPS) transmission line such as microstrip and double negative(DNG) transmission line such as one dimensional mushroom structure, strong coupling broadly arises in the cross range of dispersion curves of isolated microstrip and mushroom structure because of complex propagation constant in the cross range. Strong coupling inhibits wave propagation, so that this kind of structure can be utilized as bandstop filter(BSF). This BSF utilizes coupled transmission line instead of coupled resonator, resulting in broad bandwidth(>30 %), shan-rejection, and high rejection level. The strong coupling between DPS and DNG transmissionline makes it possible shorten coupling length, resulting in compact size. In this paper, parallel coupled BSF having center frequency of 4 GHz and 3 dB fractional bandwidth of 40 % is designed and utilized to suppressed spurious mode of two bandpass filters.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.6
• /
• pp.116-126
• /
• 2008

This paper describes the Dual-band WLAN transmitter with 2.4[GHz], 5[GHz]. Dual-band WLAN transmitter was designed at 2.4[GHz] and 5[GHz]. The Dual-band WLAN transmitter has a amplifier which operate at 2.4[GHz] and 5[GHz] frequency and two VCO(Voltage Controlled Oscillator) or VCO has a wide scope of frequency. these problem cause a size and a power consumption, The Dual-band WLAN transmitter module was proposed to solve these. the transmitter was designed to get output signals of IEEE 802.11a's 5.8[GHz] band signal using frequency multiplication way or to act a amplifier about the 2.4[GHz] band signal of IEEE 802.11b/g, according to inputed frequency and bias voltage that a eve using single transmission block. The output spectrum get the improved specification of ACPR of 4[dB], 6[dB], 16[dB] at +11[MHz], +20[MHz], +30[MHz] offset of center frequency compared to no linearization, was satisfied to transmit spectrum mask of IEEE 802.11a wireless Lan.

• Journal of the Institute of Convergence Signal Processing
• /
• v.16 no.4
• /
• pp.156-161
• /
• 2015

In this paper, a dual-polarized multi-band multi-layer antenna for a vehicle, which operates in the GPS, bluetooth, and DSRC bands, was implemented. The antenna was designed as a multi-layer structure, and a FR4-epoxy substrate with =4.4 and =1.6mm was used. GPS and DSRC antennas have circular polarized characteristics, and a single probe feeding method was applied. Simulated results by Ansys HFSS v11 was compared with the measured ones. The size of the optimally designed antenna is $67mm{\times}67mm{\times}4.8mm$, -10dB bandwidth of the anatenna was measured to be 820MHz, 127MHz, and 862MHz in each band, and 3dB AR bandwidth of the antenna was simulated to be 19MHz and 110MHz in GPS and DSRC bands. The results confirmed that suggested system satisfies the system requirements.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.42 no.6
• /
• pp.83-92
• /
• 2005

This paper presents a watermarking approach that the 1-level Discrete Wavelet Transform(DWT) coefficients of a $64{\ast}64$ binary logo image as watermarks are inserted in LL band and other specific frequency bands of the host image using Multi-Resolution Analysis(MRA) Wavelet transform for copyright protection of image data. The DWT coefficients of the binary logo image are inserted in blocks of LL band and specific bands of the host image that the 3-level DWT has been performed in the same orientation. We investigate Significant Coefficients(SCs) in each block of the frequency areas in order to prevent the quality deterioration of the host image and the watermark is inserted by SCs. When the host image is distorted by difference of the distortion degree in each frequency, we set the thresholds of SCs on each frequency and completely insert the watermark in each frequency of the host image. In order to be invisibility of the watermark, the Human Visual System(HVS) is applied to the watermark. We prove the proper embedding method by experiment. Thereby, we rapidly detect the watermark using this watermarking method and because the small size watermarks are inserted by HVS and SCs, the results confirm the superiority of the proposed method on invisibility and robustness.

• Aerospace Engineering and Technology
• /
• v.6 no.1
• /
• pp.83-91
• /
• 2007

An experimental verification of multipactor(MP) discharge for S-band diplexer as a sample DUT for space application by an in-house MP test facility is proposed. The designed diplexer having two BPFs for Rx and Tx is applied to a design of five pole inter-digital cavity type band pass filter with chebyshev response, it has 2.7 % bandwidth centered at 2.232 and 2.055 GHz for Rx, Tx, respectively. To avoid the MP discharge, the accurate design and analysis methods based on 3D EM field analysis are considered. The proposed in-house MP test facility consists of a phase detecting system using a doubly balanced mixer as a simple, low cost and real time MP test method compared with results of previously well-known MP detection systems as cross reference methods. The calculated MP threshold RF input power is 43.13 dBm. The measured one is 43 dBm and 44 dBm for CW, pulsed mode test, respectively.

• The KIPS Transactions:PartC
• /
• v.12C no.5 s.101
• /
• pp.709-716
• /
• 2005

QoS is an important requirement of the FTTH (Fiber To The Home) subscriber in access network using E-PON (Ethernet Passive Optical Network). In this research, we describe the structure of the access network and propose a bandwidth guarantee scheme for subscriber and service according to the requirements of the subscriber, service and system. This scheme uses two kinds of the classification table, which are called 'service classification table' and 'subscriber classification table.' Using the classification table, we can identify the flow of the subscriber and service. Also, we compute the number of hash table entry to minimize the loss ratio of flows using the M/G/k/k queueing model. Finally, we apply the DRR scheduling through virtual queueing per subscriber instead of the aggregated class.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.9
• /
• pp.841-848
• /
• 2016

In this paper, a microstrip-fed dual-band monopole antenna with DGS(: Defected Ground System) for WLAN(: Wireless Local Area Networks) applications was designed, fabricated and measured. The proposed antenna is based on a microstrip-fed structure, and composed of two strip lines and DGS structure and then designed in order to get dual band characteristics. We used the simulator, Ansoft's High Frequency Structure Simulator(: HFSS) and carried out simulation about parameters W2, L10, W3, and DGS to get the optimized parameters. The proposed antenna is made of $21.0{\times}36.0{\times}1.6mm3$ and is fabricated on the permittivity 4.4 FR-4 substrate. The experiment results are shown that the proposed antenna obtained the -10 dB impedance bandwidth 700 MHz(2.10~2.80 GHz) and 1,780 MHz(5.02~6.80 GHz) covering the WLAN bands. Also, the measured gain and radiation patterns characteristics of the proposed antenna are presented at required dual-band(2.4GHz band/5.0GHz band), respectively.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.12
• /
• pp.83-93
• /
• 2003

Differentiated service networks, based on bandwidth broker, perform the control and management of QoS provisioning for the QoS guaranteed services, However, the centralized bandwidth broker model has a scalability problem since it has centralized resource management for the admission control function of all call attempts, Therefore, in this paper, we proposea novel adaptive admission control mechanism according to the attempted call status for enhancing the scalability under the centralized bandwidth broker model in IP differentiated service networks, The proposed mechanism decouples the function of admission control from the bandwidth broker, So, the ingress edge node performs the admission control and the bandwidth broker performs the resource management and QoS provisioning, We also introduce an edge-to-edge path concepts and the ingress edge node performs the admission control under the allocated bandwidth to eachpath. The allocated bandwidth per path adaptively varies according to the status of the attempted calls, This mechanism can significantly reduce the number of communication message between the bandwidth broker and each edge node in the network and increase the bandwidth utilization via adaptable resource allocation, In this paper we study the adaptive admission control operation and show the efficient and extensive improvement through the performance evaluation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.5B
• /
• pp.435-447
• /
• 2003

Current existing network dimensioning method simply relies on long-time measurement data or uses average traffic characteristics of users. In this paper, we propose an efficient network dimensioning method for DiffServ over MPLS networks. First, User's SLA information is distributed from edge nodes to core nodes according to the proposed algorithm. Then at each link, class-based capacity planning is performed. For capacity planning, we proposed sets of network design parameters for DiffServ classes and bandwidth allocation schemes that are most suitable for each class. We have developed a DiffServ over MPLS network design tool using the proposed method. Simulation results show that our proposed method is able to design efficiently the required class link resources.