• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.4
• /
• pp.136-147
• /
• 2021

Autonomous driving-related technologies are developing step by step by applying the degree of driving. It is essential that operational management technology for roads where autonomous vehicles move should also develop in line with autonomous driving technology. However, in the case of road operation management, it is currently managed using only two-dimensional information, showing limitations in the systematic operation management of lane and facility information and maintenance. This study proposed a plan to construct an operation management system architecture capable of 3D spatial information-based operation management by designing a convergence database that can process real-time big data with high-definition road map data. Through this study, when using a high-definition road map based operation management system for lane and facility maintenance in the future, it is possible to visualize and manage facilities, edit and analyze data of multiple users, link various GIS S/W and efficiently process large scale of real-time data.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2007.05a
• /
• pp.123-126
• /
• 2007

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.917-918
• /
• 2008

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.623-628
• /
• 1990

This paper describes the design of EFbus(ETRI Fieldbus), EFbus was designed from the interim results of international Fieldbus standardization in IEC (International Electrotechnical Commission) and proposals of many companies. The design was performed and described on the basis of three layered architecture. Application layer S/W runs on IBM PC and provides services which is similar ED MMS in MAP to user application Data linklayer runs on Intel's iDCX96 real time executive and uses centralized media accesscontrol method. Physical layer uses Manchester encoding & decoding, twisted pair fines and RS485 electrical standard.

• Electronics and Telecommunications Trends
• /
• v.38 no.2
• /
• pp.36-45
• /
• 2023

Segment routing (SR) is a source-based routing architecture in which a node steers packets adhering to service and topological requirements. Using programmable segments, SR enables end-to-end service connectivity to satisfy the network constraints of various services. SR can be implemented with both MPLS and IPv6 dataplanes. This survey presents the overview of SR for IPv6 dataplane (SRv6), network programming technologies based on SRv6, and the SR deployment status.

• CDE review
• /
• v.11 no.2
• /
• pp.15-22
• /
• 2005

Presented in the paper is an approach to developing an intelligent mold shop as a means to overcome the difficulties faced by mold-makers due to skill shortages and increased global competition. A machine shop where as much as of the human skills are replaced by a set of intelligent systems is called an intelligent machine shop, and an intelligent mold-making machine shop is called an intelligent mold shop(MS). By analyzing the contents of operator's skill. three intelligent S/W stations have been designed: Technical Data Processing(TDP) Station, Loading Schedule Station, and Real-time Monitoring Station. A detailed architecture of the TDP station is described, and measures of effectiveness of IMS are elaborated.

• Proceedings of the CALSEC Conference
• /
• 2001.08a
• /
• pp.379-391
• /
• 2001

In this paper, we presented function catalogs that Internet content transcoding system for heterogeneous client devices must offer, and, we proposed content transcoding framework architecture that is good in extensibility. This transcoding framework can accommodate each transcoder in efficient way using device capability and user preference information based on W3C's CC/PP and Wap forum's UAProf specification. This architecture offers advantages that can add developed transcoder dynamically in Plug-In form later.

• Resources Recycling
• /
• v.27 no.1
• /
• pp.106-117
• /
• 2018

The present study was carried out to find a suitable drying method for the determination of non-evaporable water in hydraulic inorganic materials. In Part 1 of the paper, the case ordinary Portland cement was discussed and, in this Part 2, the case of alkali active slag (AAS) was investigated. Various drying methods including vacuum and oven drying, and an ignition, were used for the AAS system having different w/b, types and amounts of alkali activators. It was found that a combination of the vacuum and oven drying was a suitable drying method for the AAS case. Although a part of the crystallized water in hydration products was decomposed, but the free and adsorbed water could be completely evaporated and the deviation of the results was small.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.1035-1038
• /
• 2005

This paper describes the designs and the implementations of two H/W IPSec Systems, look-aside and inline, on TOE (Transport Offloading Engine). These systems aim for guaranteeing the security of datagram networks while preserving the bandwidth of gigabit networks. The TOE offloads a host CPU from network burdens, so that it makes the gigabit wire speed possible, and then deeper level security architecture of the IPSec guarantees the security of gigabit service network dominated by datagram packets. The focus of this paper is to minimize the TOE's performance degradation caused by the computation-oriented IPSec. The look-aside IPSec system provides a significant improvement in the CPU offload of the IPSec cryptography loads. However, the inline system completely offloads the host CPU from whole IPSec loads, providing significant additional cost saving compared to the look-aside system. In this paper, the implementations of TOE cards including commercial IPSec processors are presented. As the result of performance evaluation with the protocol analyzer, we can get the fact that the inline IPSec system is 8 times faster than the S/W system and 2 times faster than the look-aside system.

• Journal of the Korean Society of Costume
• /
• v.57 no.7
• /
• pp.15-29
• /
• 2007

H. $W\"{o}lfflin's$ methodology created viewpoint of art history which is an essential factor of art, and proposed formal analysis as an academic methodology specific to art history. H. $W\"{o}lfflin's$ expressed the see-form a as the five pair concepts which are summarized by 'linear-painterly' 'the plane-the deep'. 'closed form-open form', 'multiplicity-unity', 'absolute clarity-relative clarity'. His methodology is not only in the field of art and architecture but also clothing because during the same period have a relative tendency of thought, culture, politics and economics each other. As the result of this study were as follows. Renaissance of 16 century, the style of dress was enormous and dignified by body support outfit, hard puffs, slashes, padding and expansive jewels. It make appearance of man and woman absolute clarity because Classicism styles of aesthetic consciousness is geometrically perfect form and symmetry and restrained harmony, magnificent. Baroque of 17 century, the style of dress was vigorous mobility and subtle balance by abundant and free silhouette, soft collar, magnificent ribbon loop and tassel without body support outfit. It make appearance of man and woman comfortable and natural because Baroque styles of aesthetic consciousness is extraordinary degree of originality and creativity that was evident in the devising of new styled.