• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.193-196
• /
• 2001

Single phase CuInS$_2$ thin film with the highest diffraction peak (112) at diffraction angle (2$\theta$) of 27.7$^{\circ}$ and the second highest diffraction peak (220) at diffraction angle (2$\theta$) of 46.25$^{\circ}$ was well made with chalcopyrite structure at substrate temperature of 70 $^{\circ}C$, annealing temperature of 25$0^{\circ}C$, annealing time of 60 min. The CuInS$_2$ thin film had the greatest grain size of 1.2 ${\mu}{\textrm}{m}$ and Cu/In composition ratio of 1.03. Lattice constant of a and c of that CuInS$_2$ thin film was 5.60 $\AA$ and 11.12 $\AA$ respectively. Single phase CuInS$_2$ thin films were accepted from Cu/In composition ratio of 0.84 to 1.3. P-type CuInS$_2$ thin films were appeared at over Cu/In composition ratio of 0.99. Under Cu/In composition ratio of 0.96, conduction types of CuInS$_2$ thin films were n-type. Also, fundamental absorption wavelength, the absorption coefficient and optical energy band gap of p-type CuInS$_2$ thin film with Cu/In composition ratio of 1.3 was 837 nm, 3.0x10 $^4$ $cm^{-1}$ / and 1.48 eV respectively. When CuAn composition ratio was 0.84, fundamental absorption wavelength, the absorption coefficient and optical energy band gap of n-type CuInS$_2$ thin film was 821 nm, 6.0x10$^4$ $cm^{-1}$ / and 1.51 eV respectively.

• 한국표면공학회지
• /
• 제30권2호
• /
• pp.136-143
• /
• 1997

The photvoltaic power system has received considerable attention as the petroleumalterative energies to the environmental problems in the wored scale. $CuLnSe_2$is one ofthe most promising materials for the fabrication of large-area modules and low cost photovoltaic devices. Sulfur solute CuInSe2 thin films were prepared by RF sputtering using powder targer which were previously compacted by powder of $Cu_2Se, \;In_2Se_3, \;Cu_2S, \;and\;In_2S_3$ in various ratios. The results induicated that the sulfur ratio, the(112) texture, and the energy band gap were increased by the increase of the S/(S+Se) that was controlled by stoichiometric compound. The energy band gap can be shifted from 1.04eV to 1.50eV by abjusting the S/(S+Se) ratio, which maich it possible to obtain perfect match to the solar spectrum.

• 대한전자공학회논문지SD
• /
• 제47권10호
• /
• pp.34-41
• /
• 2010

본 연구를 통해서 대 면적, 저 전력 AMOLED 용용에 적합한 고 개구율 픽셀 보상회로와 이에 대한 구동회로를 제안하였다. 균일도는 다소 떨어지지만 안정성과 이동도가 뛰어난 저온 다결정 실리콘(LTPS) 박막 트랜지스터(TFT)를 기반으로 설계했다. 픽셀의 불량률을 낮추고 배면발광방식에 적합하도록 픽셀 보상회로를 보다 간단하게 개선하여 고 개구율 특성을 갖도록 했다. 제안하는 고 개구율 픽셀 보상회로는 일반적인 구동방식을 사용할 경우 명암비에서 큰 손해를 볼 수가 있으므로, 명암비를 높게 유지하기 위한 구동방식 및 구동회로를 제안하여 검증하였다. 이와 더불어 동영상 특성을 개선하기 위해 black data insertion 방식을 구현할 수 있도록 설계했다. 배면발광방식의 19.6" WXGA AMOLED 패널에 대해 설계했으며, 픽셀의 평균 개구율은 41.9%로 기존에 비해 8.9% 증가했다. TFT의 $V_{TH}$ 편차가 ${\pm}0.2\;V$일 때, 패널의 불균일도와 명암비는 각각 6% 이하와 10만:1 이상으로 예측되었다.

• Earthquakes and Structures
• /
• 제7권6호
• /
• pp.1141-1169
• /
• 2014

This study is aimed to investigate the seismic performance of low-rise precast wall system with base isolation. Three types of High Damping Rubber Bearing (HDRB) were designed to provide effective isolation period of 2.5 s for three different kinds of structure in terms of vertical loading. The real size HDRB was manufactured and tested to obtain the characteristic stiffness as well as damping ratio. In the vertical stiffness test, it was revealed that the HDRB was not an ideal selection to be used in isolating lightweight structure. Time history analysis using 33 real earthquake records classified with respective peak ground acceleration-to-velocity (a/v) ratio was performed for the remaining two types of HDRB with relatively higher vertical loading. HDRB was observed to show significant reduction in terms of base shear and floor acceleration demand in ground excitations having a/v ratio above $0.5g/ms^{-1}$, very much lower than the current classification of $0.8g/ms^{-1}$. In addition, this study also revealed that increasing the damping ratio of base isolation system did not guarantee better seismic performance particularly in isolation of lightweight structure or when the ground excitation was having lower a/v ratio.

• 한국환경과학회지
• /
• 제19권7호
• /
• pp.871-877
• /
• 2010

The objectives of this study were to compare growth of Pllioblastus pygmaed and soil characteristics as affected by difference of soil thickness and mixture ratio in shallow-extensive green roof module system, and to identify the level of soil thickness and mixture as suitable growing condition to achieve the desired plants in green roof. Different soil thickness levels were achieved under 15cm and 25cm of shallow-extensive green roof module system that was made by woody materials for $500{\times}500{\times}300mm$. Soil mixture ratio were three types for perlit: peatmoss: leafmold=6:2:2(v/v/v, $P_6P_2L_2$), perlit: peatmoss: leafmold=5:3:2(v/v/v, $P_5P_3L_2$) and perlit: peatmoss: leafmold=4:4:2(v/v/v, $P_4P_4L_2$). On June 2006, Pllioblastus pygmaed were planted directly in a green roof module system in rows. All treatment were arranged in a randomized complete block design with three replication. The results are summarized below. In term of soil characteristics, Soil acidity and electric conductivity was measured in pH 6.0~6.6 and 0.12dS/m~0.19dS/m, respectively. Organic matter and exchangeable cations desorption fell in the order: $P_4P_4L_2$ > $P_5P_3L_2$ > $P_6P_2L_2$. $P_6P_2L_2$ had higher levels of the total solid phase and liquid phase, and $P_4P_4L_2$ had gas phase for three phases of soil in the 15cm and 25cm soil thickness. Although Pllioblastus pygmaed was possibled soil thickness 15cm, there was a trend towards increased soil thickness with increased leaf length, number of leaves and chlorophyll contents in 25cm. The growth response of Pllioblastus pygmaed had fine and sustain condition in order to $P_6P_2L_2$ = $P_5P_3L_2$ > $P_4P_4L_2$. However, The results of this study suggested that plants grown under $P_4P_4L_2$ appear a higher density ground covering than plants grown under $P_6P_2L_2$. Collectively, our data emphasize that soil thickness for growth of Pllioblastus pygmaed were greater than soil mixture ratio in shallow-extensive green roof module system.

• 생명과학회지
• /
• 제13권6호
• /
• pp.794-798
• /
• 2003

라세믹 phenyl oxirane 기질에 대한 asymmetric biohydrolysis 활성이 우수한 Rhodosporidium toruloides SJ-4를 생촉매로 이용하여 입체선택적 가수분해 반응을 통해 라세믹 phenyl oxirane 기질로부터 광학활성 (S)-phenyl oxirane를 회분식으로 생산하는 실험을 수행하였다. (R)-phenyl oxirane 이성질체에 대한 초기 가수분해 속도에 영향을 주는 실험인자들인 pH, 반응온도, DMSO cosolvent 첨가량 등에 대해 중심합성계획법을 이용한 반응표면 분석을 통해 가수분해반응 속도를 향상시킬 수 있는 최적 반응조건을 결정하였다. pH 7.4, 반응온도 34℃ 및 DMSO 첨가량 2.3%(v/v)의 조건에서 라세믹 기질 초기 농도 100mM로부터 약 10시간 정도의 반응을 통해 ee 값이 100%인 광학적으로 순수한 (S)-phenyl oxirane를 24% 정도 (이론수율 = 50%)의 높은 수율로 얻을 수 있었다. ^u Batch production of (S)-phenyl oxirane was investigated using epoxide hydrolase activity of Rhodosporidium toruloides SJ-4. Effect of reaction condition of asymmetric biohydrolysis of racemic phenyl oxirane was analyzed and optimized by response surface methodology. The optimal conditions of pH, temperature and DMSO cosolvent ratio were 7.4, 34 ℃, and 2.3%(v/v), respectively. The final yield was enhanced up to 67%, and reaction times required to reach 99% ee (enatiomeric excess) decreased down to 50% by response surface methodology Enantiopure (S)-phenyl oxirane with 100% enantiopurity and 24% yield (theoretical yield = 50%) was obtained from racemic substrate.

• 한국환경과학회지
• /
• 제5권2호
• /
• pp.179-185
• /
• 1996

본 연구는 생명을 위협하는 Vibrio vulnificus의 생존에 온도, 염분 pH 및 자외선과 같은 환경적 요인이 어떠한 영향을 미치는 가를 알아보기 위하여 수행하였다. 6일 동안 15에서 ${25\circ}C$의 온도범위에서 V.vulnificus의 수는 증가하였지만 이 범위외에서 V.vulnifivus의 생존수는 감소하였다. 1에서 ${10\circ}C$사이에서의 실험 결과, V.vulnificus 가 $10{\circ}C$이하에서는 생존수가 적었다. 한편 6일 동안 5에서 25ppt정도의 염분조건에서는 V.vulnificus수는 감소하였다. 최적의 pH 영역은 6.5에서 8.0이었고 이 영역밖에서는 V.vulnificus의 생존율은 낮았다. 15와 $25{\circ}C$에서 자외선은 V.vulificus에 대해 살균효과를 나타내어서 2시간 동안 자외선 처리후 V.vulnificus수가 약 10,00배 감소되었다. 이상과 같은 결과들은 환경적 요인이 V.vulnificus의 생존에 미치는 영향이 크다는 것을 보여주었다.

• Journal of Oral Medicine and Pain
• /
• 제25권2호
• /
• pp.235-240
• /
• 2000

This study was carried out among 34 patients who visited Yonsei Dental Hospital from 1996. 1. to 1999. 5 for trigeminal neuralgia. By studying the patient's treatment prior to visiting our hospital, features of trigeminal neuralgia, treatment process of trigeminal neuralgia, prognosis of treatment, consultation with other professions and involvement of surgery, etc., the results are as follows: 1. 67.7% of onset age range from 40s to 60s, and average age is 50.2. 2. Ratio of right to left involvement is 1:2.1, male to female ratio is 1:1.9. 3. Occurrence rate of each branch is V3(44.1%), V2(11.8%), V1+V2+V3(11.8), V1+V2(8.8%). 4. Treatments prior to admission to our hospital are extraction(5.9%), endodontic treatment(5.9%), medication(11.8%), Oriental Medicine treatment(5.9%). 5. Routes of admittance to our hospital are by their preference(55.9%), local clinic referral(32.4%), E.N.T referral(5.9%), Neurology referral(5.9%). 6. 70.6% of patients treated at our hospital who were relieved of symptoms, were referred to Neurology(66.7%) and Pain Clinic(33.3%) for the reason of relapse, side effects of the drug itself, incomplete relief of pain. 7. 2 patients who were referred to medical part showed brain vessels contacting trigeminal nerve root on Brain MRangiography. But pain is being controlled by medication and no specific surgical procedure was carried out. The results show that 17.7% of patients admitted received inappropriate early treatment. In order to relieve tooth loss and patient's psychologic stress due to inappropriate treatment, precise differential diagnosis must be made among local teeth disease and idiopathic facial pain. Medication may show side effects of the drug itself, incomplete relief of pain or relapse of symptoms. Therefore, to treat trigeminal neuralgia appropriately by drug injection, surgery or radiation therapy, consultations among dentists, neurologists and anesthesiologists are required.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권4호
• /
• pp.161-168
• /
• 2001

Organic thin film transitors(TFTs) are of interest for use in broad area electronic applications. For example, in active matrix liquid crystal displays(AMLCDs), organic TFTs would allow the use of inexpensive, light-weight, flexible, and mechanically rugged plastic substrates as an alternative to the glass substrates needed for commonly used hydrogenated amorphous silicon(a-Si:H). Recently pentacene TFTs with carrier field effect, mobility as large as 2 $cm^2V^{-1}s^{-1}$ have been reported for TFTs fabricated on silicon substrates, and it is higher than that of a-Si:H. But these TFTs are fabricated on silicon wafer and $SiO_2$ was used as a gate insulator. $SiO_2$ deposition process requires a high insulator which is polyimide and photo acryl. We investigated trasfer and output characteristics of the thin film transistors having active layer of pentacene. We calculated field effect mobility and on/off ratio from transfer characteristics of pentacene thin film transistor, and measured IR absorption spectrum of polymide used as the gate dielectric layer. It was found that using the photo acryl as a gate insulator, threshold voltage decreased from -12.5 V to -7 V, field effect mobility increased from 0.012 $cm^2V^{-1}s^{-1}$ to 0.039 $cm^2V^{-1}s^{-1}$ , and on/off current ratio increased from $10^5\;to\;10^6$. It seems that TFTs using photo acryl gate insulator is apt to form channel than TFTs using polyimide gate insulator.

• 한국응용과학기술학회지
• /
• 제27권2호
• /
• pp.123-128
• /
• 2010

The continuous transesterification of mixed fat was done on the plug flow reactor packed with the static mixers. The transesterification using 0.5 wt% KOH, 0.8 wt% TMAH and mixed catalyst[40 v/v% KOH(0.5 wt%)+60 v/v% TMAH(0.8 wt%)] was conducted with the changes of molar ratios, weight percentage of beef, flow rates and number of static mixer's elements at $65^{\circ}C$. The overall conversion of mixed fat at 1:8 molar ratio, 50 wt% of beef and 24 of static mixer's elements increased until 0.7mL/min of flow rate. The overall conversion of mixed fat showed 96% at those conditions. So, the optimum operating conditions on tublar reactor were 1:8 molar ratio, 50 wt% of beef, 0.7 mL/min of flow rate and 24 of static mixer' s elements.