• Transactions of Materials Processing
• /
• v.27 no.1
• /
• pp.5-11
• /
• 2018

Direct energy deposition (DED) technique uses a laser heat source to deposit a metal layer on a substrate. Many researchers have used the DED technique to study the hardfacing of molds and dies. The aim of this study is to obtain high surface hardness and a sound bonding between the AISI M4 deposits and a substrate utilizing a mixed powder that contains M4 and AISI P21 powders. To prevent interfacial cracks between the M4 deposits and the substrate, the mixed powder is pre-deposited onto a JIS S45C substrate, before the deposition of M4 powders. Interfacial defects occurring between the deposits and substrate and changes in the microhardness of the intermediate layer were examined. Observations of the cross-sections of deposited specimens revealed that the interfacial cracks appeared in samples with one and two mixed layers regardless of the mixture ratio. However, the crack was removed by increasing the mixture ratio and the number of intermediate layers. Meanwhile, the microhardness in the mixed layer was found to decrease with increasing ratio of P21 powder in the mixture and that in the upper region of the deposited layers was approximately 800 HV, which was attributed to various alloying elements in the M4 powder.

• Current Photovoltaic Research
• /
• v.3 no.3
• /
• pp.75-79
• /
• 2015

Recently, $Cu_2ZnSn(S_xSe_{1-x})_4$ (CZTSSe) has been received a tremendous attraction as light absorber material in thin film solar cells (TFSCs), because of its earth abundance, inexpensive and non-toxic constituents and versatile material characteristics. Kesterite CZTSSe thin films were synthesized by sulfo-selenization of sputtered Cu/Sn/Zn stacked metallic precursors. The sulfo-selenization of Cu/Sn/Zn stacked metallic precursor thin films has been carried out in a graphite box using rapid thermal annealing (RTA) technique. Annealing process was done under sulfur and selenium vapor pressure using Ar gas at $520^{\circ}C$ for 10 min. The effect of tuning Se/(S+Se) precursor composition ratio on the properties of CZTSSe films has been investigated. The XRD, Raman, FE-SEM and XRF results indicate that the properties of sulfo-selenized CZTSSe thin films strongly depends on the Se/(S+Se) composition ratio. In particular, the CZTSSe TFSCs with Se/(S+Se) = 0.37 exhibits the best power conversion efficiency of 4.83% with $V_{oc}$ of 467 mV, $J_{sc}$ of $18.962mA/cm^2$ and FF of 54%. The systematic changes observed with increasing Se/(S+Se) ratio have been discussed in detail.

• Parasites, Hosts and Diseases
• /
• v.22 no.2
• /
• pp.171-180
• /
• 1984

In order to provide some clues for differential diagnosis of trematode infections in fecal examination, the comparative morphology of eggs of 5 kinds of heterophyid flukes (Metagonimus yokogawai, Heterophyes heterophyes nocens, Heterophyopsis continua, Stellantchasmus falcatus and Pygidiopsis summa) and Clonorchis sinensis was studied. The eggs were obtained from distal portion of uteri of worms which were recovered from men after treatment. The characteristic shape and appearance of each kind of eggs were observed in detail under light microscope, and their length and width measured and compared one another. The results are as follows: 1. Eggs of C. sinensis are elongated ovoidal in shape with attenuated anterior end, 25.3~33. 2 (28. 3 in average) ${\mu}m$ long and 14.2~17.4(5.9) ${\mu}m$ wide with length/width ratio of 1.60~2.00 (1.78). They differ from all heterophyid eggs in that they have prominent wrinkling (muskmelon pattern) at their shell surface. 2. P. summa eggs are ovoid to pyriform in shape and characterized by the smallest size of all kinds examined, 19.8~22.9 (21.6) ${\mu}m$ long and 11.1~13.4 (12.1) ${\mu}m$ wide and the ratio 1.63~1.99 (1.78). 3. Eggs of S. falcatus are elongated ovoidal and most slender form, 25.3~29.2 (27.2) ${\mu}m$ long and 11.1~13.4 (12.5) ${\mu}m$ wide with the ratio of 2.00~2.57 (2.17). 4. Eggs of M. yokogawai are ellipsoid to elliptical in shape with round both ends, 26.9~31.6 (28.5) ${\mu}m$ long and 14.2~18.2 (16.8)${\mu}m$ wide with the ratio of 1.48~2.11 (1.70). 5. H. continua eggs are oval in shape, sometimes similar to M. yokogawai or H. h. nocen$ eggs, however, the relative breadth is broadest among all kinds, with maximum width at posterior half portion. They are 23.7~27.7 (25.0) ${\mu}m$ long, 15.8~18.9 (16.4) ${\mu}m$ wide with the ratio of 1. 33~1.75 (1.53). 6. Eggs of H. h. nocens are ellipsoid to ovoid in shape but sometimes more slender than M. yokogawai and have slightly pointed both ends. They are 23.7~29.2 (25.7) p.m long, 14.2~15.8 (15.4) ${\mu}m$ wide, and the ratio 1.50~2.06 (1.67). From the results, it is concluded that eggs, of 5 kinds of heterophyids and C. sinensis can be morphologically differentiated one another, however, careful observation and measurement on sufficient number of eggs are needed.

• Korean Journal of Radiology
• /
• v.20 no.4
• /
• pp.621-630
• /
• 2019

Objective: To study the prevalence and clinical characteristics of decreased myocardial blood flow (MBF) quantified by dynamic computed tomography (CT) myocardial perfusion imaging (MPI) in symptomatic patients without in-stent restenosis. Materials and Methods: Thirty-seven (mean age, 71.3 ± 10 years; age range, 48-88 years; 31 males, 6 females) consecutive symptomatic patients with patent coronary stents and without obstructive de novo lesions were prospectively enrolled to undergo dynamic CT-MPI using a third-generation dual-source CT scanner. The shuttle-mode acquisition technique was used to image the complete left ventricle. A bolus of contrast media (50 mL; iopromide, 370 mg iodine/mL) was injected into the antecubital vein at a rate of 6 mL/s, followed by a 40-mL saline flush. The mean MBF value and other quantitative parameters were measured for each segment of both stented-vessel territories and reference territories. The MBF_ratio was defined as the ratio of the mean MBF value of the whole stent-vessel territory to that of the whole reference territory. An MBF_ratio of 0.85 was used as the cut-off value to distinguish hypoperfused from non-hypoperfused segments. Results: A total of 629 segments of 37 patients were ultimately included for analysis. The mean effective dose of dynamic CT-MPI was 3.1 ± 1.2 mSv (range, 1.7-6.3 mSv). The mean MBF of stent-vessel territories was decreased in 19 lesions and 81 segments. Compared to stent-vessel territories without hypoperfusion, the mean MBF and myocardial blood volume were markedly lower in hypoperfused stent-vessel territories (77.5 ± 16.6 mL/100 mL/min vs. 140.4 ± 24.1 mL/100 mL/min [p < 0.001] and 6.4 ± 3.7 mL/100 mL vs. 11.5 ± 4 mL/100 mL [p < 0.001, respectively]). Myocardial hypoperfusion in stentvessel territories was present in 48.6% (18/37) of patients. None of clinical parameters differed statistically significantly between hypoperfusion and non-hypoperfusion subgroups. Conclusion: Decreased MBF is commonly present in patients who are symptomatic after percutaneous coronary intervention, despite patent stents and can be detected by dynamic CT-MPI using a low radiation dose.

• Proceedings of the KIEE Conference
• /
• 2001.11a
• /
• pp.100-102
• /
• 2001

In this paper, the piezoelectric and dielectric properties of $Pb(Zr_xTi_{1-x)O_3$ - $Pb(Co_{1/3}Nb_{1/3})O_3)$ piezoelectric ceramics have been investigated as a function of Zr/Ti mole ratio. From the results, when Zr/Ti mole ratio is 49/51, electromechanical coupling coefficient($k_p$), piezoelectric strain constant($d_{33}$) mechanical quality factor($Q_m$), and Permittivity(${{\varepsilon}_{33}}^T/{\varepsilon}_0$) is 64[%], 469[PC/N], 360 and 2000, respectively. Morphotropic Phase Boundary is Zr/Ti mole ratio(49/51) from XRD analysis. Also. From SEM observation, when sintering temperature is 1150[$^{\circ}C$], grain size is about $1{\sim}2[{\mu}m]$ and maximum sintering density is 7.85[$g/cm^3$].

• Journal of The Korean Astronomical Society
• /
• v.25 no.1
• /
• pp.11-21
• /
• 1992

Applying mass model to disk galaxy NGC 300, since the observed rotation curve of NGC 300 is flatter than Toomre's mass model n = 1, two cases are used; obtaining parameters $a^n$ and $b^n$ from the polynomial fitting of the observed rotation curve (case A) and from the least square fitting between the observed rotation curve and model rotation curve (case B). In any case, n bas a fixed value of 1. Brandt's mass model is also discussed. which has a shape parameter n = 1.4. Calculated total mass and total mass to luminosity ratio are $3.3{\times}10^{10}M_{\odot}$, l2.1 for case A and $2.8{\times}10^{10}M_{\odot}$, 10.3 for case B. In case of Brandt's model, the values are $4.2{\times}10^{10}M_{\odot}$ and 15.4. The rise in the local mass to luminosity ratio in the outer part of NGC 300 implies existence of massive halo. Other dynamical properties are also discussed.

• Korean Chemical Engineering Research
• /
• v.60 no.1
• /
• pp.70-79
• /
• 2022

Biodiesel production has attracted attention as a sustainable source of fuel and is a competitive alternate to diesel engines. The glycerol that is produced as a by-product is generally discarded as waste and can be converted to green chemicals such as acetins to increase bio-diesel profitability. Acetins find application in fuel, food, pharmaceutical and leather industries. Batch experiments and analysis have been previously conducted for synthesis of acetins using glycerol esterification reaction aided by sulfated metal oxide catalysts (SO₄^2-/CeO₂-ZrO₂). The aim of this study was to optimize process parameters: effects of mole ratio of reactants (glycerol and acetic acid), catalyst concentration and reaction temperature to maximize glycerol conversion/acetin selectivity. The optimum conditions for this reaction were determined using response surface methodology (RSM) designed as per a five-level-three-factor central composite design (CCD). Statistica software 10 was used to analyze the experimental data obtained. The optimized conditions obtained were molar ratio - 1:12, catalyst concentration - 6 wt.% and temperature -90 ℃. A packed bed reactor was fabricated and column studies were performed using the optimized conditions. The breakthrough curve was analyzed.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.2
• /
• pp.185-192
• /
• 1996

This paper presents a design of vertical axis Darrieus wind turbine combine with Savonius for wind-power generating system to be adapted for variable wind speed. The wind turbine consists of two troposkien- and four Savonius-blades. Darrieus turbine is designed with diameter 9.4[m], chord length 380[mm], tip speed ratio 5. Savonius turbine is designed with diameter 1.8[m], height 2[m], tip speed ratio 0.95. The design of turbine is laid for the main data of rated wind speed 10[m/s], turbine speed 101.4[rpm]. The generating power is estimated to maximum power 20[kW], and this is converted to commercial power line by means of three phase synchronous generator-inverter system. Generating system is designed for operation on VSVF(variable speed variable frequency) condition and constant voltage system.

• Food Engineering Progress
• /
• v.21 no.2
• /
• pp.110-115
• /
• 2017

This study aimed to identify milling characteristics depending on the number of a cutting roller's air vent and blowing velocity to remove rice bran by the cutting type milling machine which can minimize the conventional milling process. The level of whiteness was found to be $38{\pm}0.5$ in all the conditions, showing consistent whiteness levels during milling. The rice temperatures turned out to be 15.4 and $14.6^{\circ}C$ which were rather low-level under the conditions of the cutting roller with 3 vents and blowing velocities of 35 and 40 m/s respectively. Cracked rice ratio was 2.13% under the conditions of the cutting roller with 3 vents and a blowing velocity of 35 m/s. Broken rice ratio showed the range of 0.762-0.869%, reflecting a low level. Turbidity after milling was decreased, as blowing velocity became faster. Energy consumption for milled rice production was decreased, as blowing velocity became faster. The optimum milling condition for cutting type milling machine depending on air vent number of cutting roller and blowing velocity was found to be 3 vents and 35 m/s.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.420-423
• /
• 2003

A low temperature difference model Stirling engine is a small Stirling engine running with several degree of temperature difference without power output. In this study, the design parameters to give maximum power are discussed. As results, the phase angle is about 100 degree, and compression ratio is 1.5% of the ratio of heat source temperatures at maximum power condition.