• Journal of the Korean Wood Science and Technology
• /
• 제44권3호
• /
• pp.457-476
• /
• 2016

본 연구에서는 목재의 열처리가공에 대하여, 문헌 연구를 통하여 이와 관련된 주요 이슈 및 기술 동향을 조사하였다. 산업적으로 이용되는 주요 열처리기술은 네덜란드의 Plato-process, 프랑스의 Retification process, 독일의 OHT-process, 및 핀란드의 Thermowood process 등이었다. 열처리 공정상의 주요 영향인자들은 대상 수종, 가열 온도, 시간, 열전달 매질(air, 증기, 진공, 질소, 오일 등)이며, 이들 인자들을 변수로 한 최적조건 탐색 등의 연구가 주류를 이룬다. 열처리 목재는 치수안정성 증가, 중량 및 강도 감소, 부후균에 대한 내후성 향상에 변이, 변색균 및 해충에 대해 불충분한 저항성 등의 특징을 가진다. 열처리 목재의 내후성 향상을 위해 각 수종에 적합한 열처리 공정과 처리조건 탐색의 필요성이 시사되었다. 지속가능한 환경보존 및 목재자원 절약을 위해 열처리 목재의 새로운 용도 개발 및 이용 확대 노력이 반드시 필요한 과제인 것으로 고찰되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제44권2호
• /
• pp.172-183
• /
• 2016

Densification of the inner part of oil palm trunk (OPT) by the close system compression (CSC) method was performed in this study. The effects of the compression temperature and time on the anatomical, physical and mechanical properties of OPT were evaluated. The inner part of OPT with an initial average density of $0.3g/cm^3$ was used as samples. Oven-dried samples were immersed in water and vacuumed until fully saturated and then compressed by CSC at 120, 140, 160 or $180^{\circ}C$ for 10, 20, 30 or 40 min. The anatomical characteristics of transverse and radial sections before and after compression were compared by optical microscopy. The physical and mechanical properties, including the density, recovery of set (RS), modulus of elasticity (MOE), modulus of rupture (MOR), and compression parallel to grain were examined. It was observed that the anatomical characteristic of the inner part of OPT (i.e., vascular bundles, vessels, and parenchyma tissue) became flattened, fractured, and collapsed after compression by CSC. The RS decreased with increasing compression temperature and time. The lower RS indicated high dimensional stability. The physical and mechanical properties (i.e., density, MOR, MOE, and compressive strength) of the inner part of OPT increased with increasing compression temperature and time. Compression by the CSC method at $160^{\circ}C$ for 40 min was the optimum treatment.

• Journal of the Korean Wood Science and Technology
• /
• 제45권6호
• /
• pp.787-796
• /
• 2017

A low dimensional stability and poor bending strength properties were main problems in particleboard manufacturing. The objective of this research was to evaluate the effect of mixed wood species and urea-formaldehyde (UF) or urea-melamine-formaldehyde (UMF) resins on the physical and mechanical properties of three-layer particleboards. The ratio of face/core/back layer was 1 : 2 : 1. The resin content of 12% for both UF resins and UMF resins (UF/MF = 70/30% w/w) was used. The results of this study showed that the utilization of S.mahagony shaving using both UF and UMF resins caused a decrease in the thickness swelling and water absorption of the boards. Thickness swellings of particleboard made of Sengon/Sengon/Sengon (SSS), Mahogany/Mahogany/Mahogany (MMM), Sengon/Mahogany/Sengon (SMS), and Mahogany/Sengon/Mahogany (MSM) were in the range of 23%, 12~16%, 14~16%, and 13~21%, respectively. The board bonded with UMF resin demonstrated better dimensional stability than that bonded with UF resin alone. Modulus of elasticity (MOE) and modulus of rupture (MOR) of particleboards made of S. mahagony shaving in the surface layer in both MMM and MSM boards were better than those of the SSS and SMS. MOE of MMM and MSM board was in the ranges of 24,000 to $26,000kg.cm^{-2}$ and 18,000 to $21,000kg.cm^{-2}$ respectively. Meanwhile, the MOR of board was in the ranges of 200 to $240kg.cm^{-2}$ and 190 to $228kg.cm^{-2}$, respectively.

• 임산에너지
• /
• 제25권2호
• /
• pp.28-33
• /
• 2006

본 연구에서는 대기오염에 대한 저항성과 내충성, 항균성 등이 강하여 가로수로 많이 심어진 은행나무에 있어서, 그 잎의 파티클보드 제조 원료로서의 가능성을 모색하고자 하였다. 이를 위해 은행나무 잎을 분쇄한 다음 목재 파티클에 소량 혼합하여 파티클보드를 제조하였다. 은행나무 잎을 혼합하여 제조한 파티클보드의 물리, 기계적 성질을 조사하고 포름알데히드 방출량의 저감효과에 대해 검토하였다. 목재 파티클에 대하여 은행나무 잎을 $1{\sim}5%$ 첨가하여 제조한 파티클보드는 은행나무 잎을 첨가하지 않은 대조구에 비해 밀도, 함수율, 흡수두께팽창률 등 물리적 성질과 휨강도, 박리강도와 같은 기계적 성질은 크게 감소하지 않았으며 모두 KS 파티클보드의 기준을 만족하였다. 은행나무 잎의 혼합량에 따라 포름알데히드 방출량은 점차 감소하였으며, 특히 은행나무 잎이 3% 첨가된 파티클보드의 포름알데히드 방출량은 $2.81mg/{\ell}$에서 $1.66mg/{\ell}$로 대조구에 비해 약 40% 감소하였다. 은행나무 잎이 지닌 고유한 항균성에 덧붙여 본 연구로부터 얻어진 결과는 낙엽으로 폐기되는 은행나무 잎을 원료로 포름알데히드 방출량이 낮은 기능성 파티클보드를 제조할 수 있다는 새로운 사실을 보여주고 있다.

• 한국수소및신에너지학회논문집
• /
• 제26권2호
• /
• pp.114-119
• /
• 2015

Nowdays, fossil fuels have been used as an important resource in development of industry. But it is limited and caused climate change such as pollution and global warming. So nuclear fusion research is being issued with tritium to develop eco-friendly and sustainable energy. Republic of Korea is in charge of Storage and Delivery System (SDS) in the International Thermonuclear Experimental Reactor (ITER), weld present in the SDS bottles are easily exposed to the hydrogen embrittlement of special characteristics of the hydrogen in hydrogen atmosphere, When the hydrogen embrittlement is rapidly progresses, the cracking is generated in the weld zone. Due to this cracking, the risk of leakage of tritium into the atmosphere occurs. In this study, hydrogen heat treatment was processed through the Pressure-Composition-Temperature (PCT) device according to the time variation. Also mechanical properties such as rupture strength test, three point bend test and hardness test in accordance with the respective time have been conducted and the fracture was observed by scanning electron microscopy(SEM) after the mechanical properties evaluation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.180-185
• /
• 2001

In the life assessment for plant structural component, the research on deterioration of toughness and material properties occurred in weldments has been considered as very important problems. In general, the microstructures composed in weldments are hugely classified with weld metal(W.M), fusion line(F.L), heat affected zone(HAZ), and base metal(B.M). It has been reported that the creep characteristics on weldments having variable microstructures could be unpredictably changed. Furthermore, it is also known that HAZ adjacent to F.L exhibits the decreased creep strength compared to those in base or weld metals, and promotes the occurrence of Type III and Type IV cracking due to the growth of grains and the coarsening carbides precipitated in ferritic matrix by welding and PWHT processes. However, the lots of works reported up to date on creep damage in power plant components have been mostly conducted on B.M and the creep properties on a localized microstructures in weldments have not as yet been throughly investigated. In this paper, for various microstructures such as coarse grain HAZ(CGHAZ), W.M and B.M in X20CrMoV121 steel weldment, the small punch-creep(SP-Creep) test using miniaturized specimen(t=0.5mm, 0.25mm) is performed to investigate a possibility for creep characteristics evaluation.

• 대한기계학회논문집A
• /
• 제34권4호
• /
• pp.457-465
• /
• 2010

본 연구에서는 McVetty 와 Monkman-Grant 의 모델에 기초하여 만들어진 새로운 크리프 수명예측 모델인 Taylor 급수(T-S) 모델을 제안하였다. 본 모델은 회귀분석에서 발생하는 오차를 줄이기 위하여 McVetty 모델에서 sinh 함수를 Taylor 급수에 의해 변환한 후 첫 3 개항을 취한 것으로서 모델중의 상수 값은 통계학적 방법인 최대가능성 기법을 이용하여 결정되었다. T-S 모델을 이용하여 Alloy 617 의 크리프 수명을 예측한 결과 Eno, 지수함수 및 Larson-Miller(L-M) 방법에 비해 더 정확한 예측을 하는 것으로 나타났다. 또한 T-S 모델은 특정 온도에서 크리프 수명 예측을 할 수 있는 등온 T-S(IT-S) 모델로 표현될 수 있었으며, IT-S 모델은 Alloy 617 의 장시간 크리프 수명예측에서 가장 좋은 예측을 하는 것으로 나타났다.

• 한국수산과학회지
• /
• 제53권4호
• /
• pp.583-587
• /
• 2020

Imitation fish roe (IFR) based on calcium alginate hydrogels (CAG) can be heat treated for sterilization and salted to prolong the shelf life. However, these processes change the physical properties of IFR, and it is necessary to minimize these changes. In this study, we investigated the effects of xanthan gum (XG) treatment on the quality and stability of IFR. Both non-XG and XG-treated IFRs were treated with boiling water (95℃), sodium chloride (0.5-2.0%, w/v), and autoclaving. The non-XG treated IFR shrunk slightly after the boiling water and autoclaving processes. By comparison, shrinkage of the XG-treated IFR after autoclaving was significantly reduced. The sphericity of the non-XG treated IFR was reduced by the boiling water, sodium chloride, and autoclaving treatment. However, the sphericity of the XG-treated IFR was maintained by 90% or more, preserving the IFR shape at a level visually recognized as spherical. In addition, unlike the non-XG treated IFR, the XG-treated IFR showed high rupture strength even after the salt and heat treatments. Our findings provide useful information for the industrialization of IFR based on CAG with heat and salt treatments.

• 한국산림과학회지
• /
• 제82권4호
• /
• pp.396-405
• /
• 1993

이 논문에서는 비선형계획법(非線型計劃法)에 의해 파티클보드 생산공정을 분석하여 생산비용을 최소화하기 위한 전산(電算)모델을 제시하였다. 의사결정변수(意思決定變數)는 파티클보드의 생산비용 및 품질과 밀접한 관련이 있는 생산공정상의 요소로써 파티클보드의 비중(比重), 접착제 첨가량 및 매트함수율로 설정하였으며, 휨강도 및 박리강도와 같은 파티클보드의 최저 품질기준은 제약조건(制約條件)으로써 이러한 의사결정변수(意思決定變數)들의 비선형함수(非線型函數)로 수식화되었다. 또한 전산(電算)모델을 시나리오에 따른 가상적인 생산여건들에 적용하여 봄으로써, 칩가격, 접착제 가격 및 열압속도와 같은 경영인자(經營因子)들의 변동(變動)이 생산비용에 마치는 영향력을 분석(分析)하여 전산모델의 적용례(適用例)를 제시하였다.

• Fisheries and Aquatic Sciences
• /
• 제10권3호
• /
• pp.103-112
• /
• 2007

High prices, overfishing, and contamination have limited the availability of natural caviar as a food product. We attempted to apply encapsulation by calcium-alginate gel membranes to caviar analog preparation in an effort to produce a high-quality replacement for natural caviar. Physical conditions of stirring speed $(X_1,\;rpm)$ and gelation time $(X_2,\;min)$ as the independent variables for gelation were optimized by response surface methodology. Sphericity $(Y_1,\;%)$, diameter $(Y_2,\;mm)$, membrane thickness $(Y_3,\;mm)$, rupture strength $(Y_4,\;g)$, and rupturing deformation $(Y_5,\;mm)$ were used as the dependent variables to compare characteristics of the capsules for caviar analogs with natural caviar. The values of the independent variables as evaluated by multiple response optimization were $X_1=-0.1271 (278 rpm) and $X_2=0.4436$ (12.2 min), respectively. Predicted values of the four dependent variables were $Y_1=97.7%,\;Y_2=2.97mm,\;Y_4=1,465g,\;and\;Y_5=1.15mm$. Membrane thickness $(Y_3)$ was eliminated from the dependent variables for multiple response optimization because it could not be measured with an image analyzer. The experimental values prepared under the optimal conditions for verification nearly coincided with the predicted values and satisfied the conditions of natural caviar.