• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제14권5호
• /
• pp.462-466
• /
• 2008

본 논문에서는 동적 애드 혹 네트워크(MA-NET)상에서 효율적인 라우팅을 위해 대표적인 군집단지능 알고리즘인 Ant Colony Optimization 알고리즘에 기반을 둔 정보 속성을 고려한 Data Dependent Swarm Intelligence Routing Algorithm(DSRA)을 제안한다. 제안된 알고리즘은 정보를 Realtime 정보와 Non-Realtime 정보로 분류하여 이 두 가지 속성에 의존적인 전송 알고리즘을 적용함으로써 첫째, Realtime 정보의 지연시간을 감소시켜 보다 효율적인 라우팅 경로를 구성하고 둘째, Non-Realtime 정보와 Realtime 정보의 경로 분산 효과를 통해 전체적인 네트워크의 lifetime을 증대시킨다. AODV[1], DSR[2], AntHocNet[3]과 비교를 통해 지연시간과 lifetime 모두에서 DSRA가 더 나은 성능을 보인다는 것을 실험적으로 확인한다.

• 산업경영시스템학회지
• /
• 제33권4호
• /
• pp.201-208
• /
• 2010

This research is about developing an efficient solution procedure for the vehicle routing problem under varying vehicle moving speeds for hour-based time interval. Different moving speeds for every hour is too difficult condition to solve for this type of combinatorial optimization problem. A methodology to divide the 12 hour based time interval offered by government into 5 different time intervals and then divide delivery area into 12 small divisions first and then re-organizing them into 5 groups. Then vehicle moving speeds are no longer varying in each of the 5 divisions. Therefore, a typical TSP solution procedure may be applied to find the shortest path for all 5 divisions and then connect the local shortest paths to form a delivery path for whole area. Developed solution procedures are explained in detail with 60 points example.

• 한국멀티미디어학회논문지
• /
• 제12권6호
• /
• pp.824-832
• /
• 2009

Multi-radio multi-channel Wireless Mesh Network requires an effective management policy to control the assignment of channels to each radio. We concentrated our investigation on modeling method and solution to find a dynamic channel assignment scheme that is adapted to change of network traffic. Multi-path routing scheme was chosen to overwhelm the unreliability of wireless link. For a particular traffic state, our optimization model found a specific traffic distribution over multi-path and a channel assignment scheme that maximizes the overall network throughput. We developed a simple heuristic method for channel assignment by gradually removing clique load to obtain higher throughput. We also presented numerical examples and discussion of our models in comparison with existing research.

• 한국컴퓨터정보학회논문지
• /
• 제21권6호
• /
• pp.77-81
• /
• 2016

This paper deals with the optimization problem that decides the routing of connection between multi-source and multi-sink. For this problem, there is only in used the mathematical approach as linear programming (LP) software package and has been unknown the polynomial time algorithm. In this paper we suggest the heuristic algorithm with $O(mn)^2$ time complexity to solve the optimal solution for this problem. This paper suggests the simple method that assigns the possible call flow quantity to augmenting path of ($s_i,t_i$) city pair satisfied with demand of ($s_i,t_i$). The proposed algorithm can be get the same optimal solution as LP for experimental data.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권5호
• /
• pp.1708-1734
• /
• 2022

In the development of logistics system, the breakthrough of important technologies such as technology platform for logistics information management and control is the key content of the study. Based on Javascript and JQuery, the logistics system realizes real-time monitoring, collection of historical status data, statistical analysis and display, intelligent recommendation and other functions. In order to strengthen the cooperation of warehouse storage, enhance the utilization rate of resources, and achieve the purpose of real-time and visual supervision of transportation equipment and cargo tracking, this paper studies the VNF dynamic deployment and SFC routing problem in the network load change scenario based on the logistics system. The BIP model is used to model the VNF dynamic deployment and routing problem. The optimization objective is to minimize the total cost overhead generated by each SFCR. Furthermore, the application of the SFC mapping algorithm in the routing topology solving problem is proposed. Based on the concept of relative cost and the idea of topology transformation, the SFC-map algorithm can efficiently complete the dynamic deployment of VNF and the routing calculation of SFC by using multi-layer graph. In the simulation platform based on the logistics system, the proposed algorithm is compared with VNF-DRA algorithm and Provision Traffic algorithm in the network receiving rate, throughput, path end-to-end delay, deployment number, running time and utilization rate. According to the test results, it is verified that the test results of the optimization algorithm in this paper are obviously improved compared with the comparison method, and it has higher practical application and promotion value.

• 한국지능시스템학회논문지
• /
• 제22권2호
• /
• pp.148-153
• /
• 2012

본 논문에서는 무선 센서 네트워크에서 실시간 대용량 데이터를 전송하고자 할 때 QoS 요구조건과 에너지 효율성 요구를 만족시킬 수 있는 간섭 인지 기반의 결함 허용 QoS 라우팅 기법을 제안한다. 제안된 기법에서는 처리량을 최대화하고 지연시간을 최소화하기 위해 간섭비율과 예측전송시간을 기반으로 하는 새로운 누적 경로 메트릭을 사용하여 전송 경로에 결함이 발생하더라도 최적의 전송경로를 결정하도록 한다. 마지막으로, 시뮬레이션을 통하여 제안된 라우팅 기법을 사용하면 네트워크 처리량 및 지연시간 측면에서 성능이 향상됨을 보인다.

• 전자공학회논문지A
• /
• 제32A권2호
• /
• pp.140-150
• /
• 1995

A symbolic layout generator, called Flexible Module Generator (FMG), has been developed for transgorming a given CMOS circuit netlist into an optimized symbolic layout. Contrary to other conventional module generators which place transistors either in horizontal or in vertical direction, FMG places transittors in any hence can multiples of 90$^{\circ}$. This flexible layout style can maximize the diffusion sharing and hence can reduce the wire-length for both of area minimization and performance improvement. In FMG, transistors are initially randomly placed and then selected transistors are iteratively replaced using an optimization technique based on simulated evolution. Whenever a transistor is replaced, the affected nets are rerouted. Constraints on the shape, aspect ratio, and critical path delays are considered during the optimization process. Routing is performed by using a modified maze router on polysilicon, metal 1, and metal 2 interconnection layers. additional routing grids are added, if necessary, for complete routing. Unused rows or columns are removed after routing for area minimization. Experimental reasults show that FMG synthesizes satisfactory layouts.

• ETRI Journal
• /
• 제43권5호
• /
• pp.799-811
• /
• 2021

This paper considers a challenging problem: to simultaneously optimize the cost and the quality of service in opaque wavelength division multiplexing (WDM) networks. An optimization problem is proposed that takes the information including network topology, traffic between end nodes, and the target level of congestion at each link/ node in WDM networks. The outputs of this problem include routing, link channel capacities, and the optimum number of switch ports locally added/dropped at all switch nodes. The total network cost is reduced to maintain a minimum congestion level on all links, which provides an efficient trade-off solution for the network design problem. The optimal information is utilized for dynamic traffic in WDM networks, which is shown to achieve the desired performance with the guaranteed quality of service in different networks. It was found that for an average link blocking probability equal to 0.015, the proposed model achieves a net channel gain in terms of wavelength channels (𝛾_w) equal to 35.72 %, 39.09 %, and 36.93 % compared to shortest path first routing and 𝛾_w equal to 29.41 %, 37.35 %, and 27.47 % compared to alternate routing in three different networks.

• 한국CDE학회논문집
• /
• 제17권4호
• /
• pp.246-252
• /
• 2012

The piping route of hydraulic hose is designed with avoiding interferences to surrounding components. However, in a real practice, the piping route is mostly decided with an expert's experiences on site due to the complexity of design. Thus, this paper proposes a design methodology of the optimized route of a hose. We use NURBS representation to describe the piping route, which is possible to be locally modified, and an energy minimization method is applied to avoid interferences to the surroundings. In other words, the NURBS curve describing a piping route is modified to meet the desired positions from minimizing the perturbation of the control points, and the strain energy of the curve is then optimized to make the curve natural. The proposed method is implemented and its feasibility is validated using the commercial CAD software, CATIA V5.

• 한국경영과학회지
• /
• 제22권4호
• /
• pp.17-35
• /
• 1997

This paper considers the efficient design of routing path and wavelength assignment in the single-hop WDM optical transport networks. The connection demands between node-pairs are given and a connection between a pair of nodes must be made by only one lightpath. It is assumed that no wavelength conversion is allowed and the physical topology of the network and the number of available wavelengths of a physical link are also given. This paper proposes the method to route a path and assign a wavelength to the path, which guarantees fairness to every node pair. In order to guarantee fairness and maximize connections, an optimization model is established, which successively maximizes minimum connection ratio to the demand of each node pair. A heuristic algorithm with polynomial iterations is developed for the problem since the problem is NP-hard. The heuristic algorithm is implemented and applied to the networks with real problem sizes. The results of the application are compared with GAMS/OSL.