• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.11
• /
• pp.171-179
• /
• 2013

This paper presents a comparative study on application of Routh-Hurwitz and Llewellyn absolute stability criteria to a scaled telerobotic system. The dynamic equations of the telerobotic system are given, and the transfer function of the system is obtained for further stability analysis. The stable margins of controller gains are obtained using both stability analysis methods, and the differences in the results are described and explained. The paper is concluded by a numerical example verifying performed stability analysis.

• Journal of Ocean Engineering and Technology
• /
• v.6 no.1
• /
• pp.62-68
• /
• 1992

In this study, a system coupled with the nonlinear dynamic vibration absorber was modelled, and its equation of motion was analized by the harmonic balance method to obtain the amplitude ratio. And also, the stability analysis was done by the Routh Hurwitz method. In the vibration systems coupled with the nonlinear dynamic vibration absorber, the unstable region and the jump phenomenon can be ramarkably affected by the damping ratio. The stable and unstable region that obtained to differential method excellently agreed to the result of the stability analysis of Routh Hurwitz.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.4
• /
• pp.389-394
• /
• 2014

This paper presents the effect of a reflective force computed from a first-order-hold method on the stability of a haptic system. A haptic system is composed of a haptic device with a mass and a damper, a virtual spring, a sampler and a sample-and-hold. The boundary condition of the maximum virtual stiffness is analytically derived by using the Routh-Hurwitz criterion and the condition shows that the maximum virtual stiffness is proportional to the square root of the mass and the damper of a haptic device and also is inversely proportional to the sampling time to the power of three over two. The effectiveness of the derived condition is evaluated by the simulation. When the reflective forces are computed by using the first-order-hold method, the maximum available stiffness to guarantee the stability is increased several hundred times as large as when the zero-order-hold method is applied.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2230-2232
• /
• 2003

One of the important problems in a control system design is the requirement that the system should have adequate relative stability. In this paper, We proposed a tuning algorithm PI controller for first order plus dead time system. It is determined the domain of the PI control parameters by Routh - Hurwitz criterion, and we tune parameters of the PI controller using genetic algorithm. A numerical example is also given to illustrate the method.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.4
• /
• pp.332-340
• /
• 2011

A missile with a strapdown seeker should properly estimate line-of-sight(LOS) rate using its attitude information and the look angle of the seeker because LOS rate information in an inertial coordinate system, which is used for a proportional navigation(PN) homing guidance, can not be obtained directly. However, an unnecessary feedback loop(Parasite Loop) is formed in the guidance and control loop, and it may cause the guidance performance degradation or even the unstability of the system(Parasite Effect). This paper presents estimation methods for the LOS rate information and effective ways to minimize the parasite effect using Routh-Hurwitz stability criterion. Various numerical simulations are also included to verify the proposed methods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.1813-1818
• /
• 2014

This paper presents the stability analysis of the haptic system including a human impedance using the Routh-Hurwitz criterion. The reflective force is computed from a virtual spring model and is transferred to a human operator using the first-order-hold method. The stability boundary conditions are induced and the relation among a virtual spring ($K_w$), the mass ($M_h$), the damping ($B_h$) and the stiffness ($K_h$) of a human impedance is analyzed. Hence the stability boundary of the virtual spring ($K_w$) is proposed as $K_w{\leq}54413{\sqrt{(M_h+M_d)(B_h+B_d)}}-0.486K_h$ when the sampling time is 1 ms. The average relative error is about 0.5% when the mathematical analysis results are compared with the results of the stability boundary model.

• Journal of Convergence for Information Technology
• /
• v.11 no.2
• /
• pp.124-129
• /
• 2021

In this paper, an optimal controller design that guarantees absolute stability is proposed. The order of application of the thesis determines whether the delay time is included, and if the delay time is included, the delay time is approximated through the Pade approximation method. Then, the open loop transfer function for the process model and the controller transfer function is obtained, and the absolute stability interval is calculated by the Routh-Hurwitz discrimination method. In the last step, the optimal Proportional and Integral and Derivative(PID) control parameter value is calculated using a genetic algorithm using the interval obtained in the previous step. As a result, it was confirmed that the proposed method guarantees stability and is superior to the existing method in performance index by designing an optimal controller. If we study the compensation method for the delay time in the future, it is judged that better performance indicators will be obtained.

• Tribology and Lubricants
• /
• v.13 no.1
• /
• pp.28-33
• /
• 1997

Results of theoretical investigations of the stability characteristics of externally pressurized air journal bearing, of which bearing is synchronously vibrate with respect to rotor, are presented. Linearized perturbation method is used to get the dynamic coefficients of air bearing, and the Routh-Hurwitz criterion is used to obtain stability map. The stability characteristics operating at zero steady-state eccentricity is investigated of various phase difference of bearing to rotor. It is shown that stability of air bearing is greatly influenced by synchronous motion of bearing, there exists optimum phase difference which gives maximum stability threshold.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.10
• /
• pp.930-935
• /
• 2015

An unmanned forklift requires precise positioning and pallet detection. Therefore, conventional unmanned forklifts use high-cost sensors to find the exact position of the pallet. In this study, a docking algorithm with two cameras is proposed. The proposed method uses vision data to extract the angle difference between the pallet and the forklift. Then the control law is derived from the extracted angle for successful docking. The extracted angle is compared with the actual angle in the real environment. The control law is tested with the Lyapunov stability test and Routh-Hurwitz stability criterion. Through various experiments, the proposed docking algorithm showed the success rate high enough for real-life applications.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.17 no.1
• /
• pp.35-40
• /
• 1981

This pape presents a study of stability of the two mass rotor with limited power similar to that employed by Kononenko and also presents a study on the digital computer to obtain the unstable region of the ;'ot::r oyer two critical speed ranges. The unstable region is identified by studying the Routh-Hurwitz criterion of the chc.rc.cteristic equation. The results are presented in two and three-dimensional diagrams to show how the various parameters affeCt the unstable region.