• 품질경영학회지
• /
• 제45권3호
• /
• pp.365-377
• /
• 2017

Purpose: In the A rotorcraft, the division of a long yaw control rod was studied to improve the heat treatment capability. The purpose of this study was to analyze whether division of yaw control rod affects quality reliability in the A rotorcraft and analyze whether it secured flight safety. Methods: The structural static test and the vibration durability test on the split shape of yaw control rod were carried out in order to examine and verify the existing structural analysis results. Results: Structural static test results showed that there were no cracks and vibration durability test results showed that there was no damage or breakage on the split yaw control rod. Conclusion: This study showed that the quality reliability was confirmed and thus the flight safety of the A rotorcraft was secured. And it is expected that the split technique of the yaw control rod will contribute to the development of the rotorcraft industry in the future.

• 항공우주시스템공학회지
• /
• 제17권6호
• /
• pp.133-143
• /
• 2023

본 논문에서는 유무인 협업을 위한 유인회전익기에 의한 다수 무인기 운용통제기술의 요구도 검증을 위한 통합검증환경의 요구도 분석, 구현 및 검증에 대해 기술하였다. 통합검증환경은 유인회전익기 비행 모의, 무인항공기 비행 및 임무장비 모의, 무인항공기 제어 및 유인회전익기와의 통제권 변경을 위한 지상통제장비 모의, 유인회전익기 및 무인항공기 임무계획 작성 및 전송을 위한 운용통제장비 모의로 구성된다. 각각 구현된 구성품들은 소프트웨어/하드웨어 통합시험을 통해 요구도를 검증하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제10권2호
• /
• pp.12-22
• /
• 2009

This paper deals with the State-Dependent Riccati Equation (SDRE) Technique for the design of rotorcraft waypoint guidance. To generate the flight trajectory through multiple waypoints, we use the trigonometric spline. The controller design and its validation is based upon a level 2 simulation rotorcraft model and the designed SDRE controller is applied to the trajectory tracking problems. To verify the designed guidance law, the simulation environment of high fidelity rotorcraft model is developed using three independent PCs. This paper focuses on the validation of rotorcraft waypoint guidance law which is designed by using SDRE Controller.

• International Journal of Aeronautical and Space Sciences
• /
• 제11권2호
• /
• pp.69-79
• /
• 2010

This paper describes the experimental framework for the control system design and validation of a rotorcraft unmanned aerial vehicle (UAV). Our approach follows the general procedure of nonlinear modeling, linear controller design, nonlinear simulation and flight test but uses an indoor-installed multi-camera system, which can provide full 6-degree of freedom (DOF) navigation information with high accuracy, to overcome the limitation of an outdoor flight experiment. In addition, a 3-DOF flying mill is used for the performance validation of the attitude control, which considers the characteristics of the multi-rotor type rotorcraft UAV. Our framework is applied to the design and mathematical modeling of the control system for a quad-rotor UAV, which was selected as the test-bed vehicle, and the controller design using the classical proportional-integral-derivative control method is explained. The experimental results showed that the proposed approach can be viewed as a successful tool in developing the controller of new rotorcraft UAVs with reduced cost and time.

• 제어로봇시스템학회논문지
• /
• 제15권1호
• /
• pp.44-53
• /
• 2009

In this paper, Recursive Least Squares (RLS) and Fourier Transform Regression (FTR) methods for estimating stability and control derivatives of small unmanned helicopter are evaluated together with MMLE technique. Flight data simulated by using a commercial small-scale helicopter model are exploited to estimate the parameters with accuracies for hover and cruise modes. The performances of the system identification methods are also compared by analyzing the responses of the reconstructed systems using estimated derivatives.

• 한국항공우주학회지
• /
• 제37권3호
• /
• pp.293-300
• /
• 2009

근거리 감시정찰을 수행할 수 있는 헬리콥터형 무인항공기를 개발하였다. 임무수행 가능성을 검토한 결과 전동 모터로 구동되는 동축반전 헬리콥터형 비행체가 선정되었다. 자동비행을 위해 상용 자동비행장치와 무선통신 모뎀이 채택되었고, 공중촬영을 위한 CCD 카메라가 탑재되었다. 완성된 비행체는 수동 비행시험을 통해 성능을 검증하였으며, 자동비행장치 탑재 후 점항법 비행을 통해 임무수행이 가능함을 확인하였다. 본 논문에서는 동축반전 무인항공기의 개발을 위한 설계 및 체계종합 전 과정에 관하여 기술하였다.

• 한국항공우주학회지
• /
• 제33권8호
• /
• pp.56-64
• /
• 2005

모형헬리콥터를 이용한 무인항공기 설계를 위해 비선형 형태의 수학적 모델이 선행되어야 한다. 모형헬리콥터는 실기 헬리콥터에 비해 회전수가 훨씬 높으며 따라서 동특성도 실물기에 비해 훨씬 빠르다는 차이점이 있다. 본 논문에서는 축소형 헬리콥터의 수학적 모델링에 필요한 정식화과정으로서 복잡성을 최소화하면서도 실제의 동특성에 잘 부합하도록 각 구성요소별로 계산한 후 전체로 합산하는 방법을 제시하였다. 제자리 비행과 전진비행에서 수치계산을 통해 트림 값들을 계산하고 제자리 비행조건에서 선형 시스템을 해석하여 모형헬리콥터의 비행모드를 분석하였다. 계산결과 일반적인 경향은 몇 가지 작은 부분 이외에는 대체로 다른 연구결과와 비슷하였다. 이 과정을 검증하기 위해서 비행시험을 수행하여 시스템식별에 의한 결과와 비교하는 연구가 후속 수행될 예정이다.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권3호
• /
• pp.442-453
• /
• 2016

A significant source of vibration in helicopters is the main rotor system, and it is a technical challenge to reduce the vibration in order to ensure the comfort of crew and passengers. Several types of passive devices have been applied to conventional helicopters in order to reduce the vibration. In recent years, helicopter manufacturers have increasingly adopted active vibration control systems (AVCSs) due to their superior performance with lower weight compared with passive devices. AVCSs can also maintain their performance over aircraft configuration and flight condition changes. As part of the development of AVCS software for light civil helicopter (LCH) applications, a test bench is constructed and vibration control tests and simulations are performed in this study. The test bench, which represents the airframe, is excited using a pair of counter rotating force generators (CRFGs) and a multiple input single output (MISO) AVCS that consists of three accelerometer sensors and a pair of CRFGs; a filtered-x least mean square (LMS) algorithm is applied for the vibration reduction. First, the vibration control tests are performed with uniform sensor weights; then, the change in the control performance according to changes in the sensor weight is investigated and compared with the simulation results. It is found that the vibration control performance can be tuned through adjusting the weights of the three sensors, even if only one actuator is used.

• 한국항공우주학회지
• /
• 제47권11호
• /
• pp.821-829
• /
• 2019

회전익 항공기는 기체 자체로는 불안정하기 때문에 안정적인 운영을 위해서는 flybar와 같은 안전장치가 필요하다. 최근에는 센서 기술이 발달하여, flybar 대신 기체의 안정성을 향상 시킬 수 있는 안정성 증대 장치(SAS : Stability Augmentations System)를 사용하고 있다. 안정성 증대 장치가 포함된 회전익 항공기를 무인으로 활용하기 위해서는 안정성 증대 장치 기능을 포함한 비행제어 컴퓨터가 반드시 필요하다. 본 논문에서는 역 설계를 활용하여 상용 안전성 증대 장치의 알고리즘을 예측하였다. 그리고 그 결과를 비행제어컴퓨터에 활용하여 무인회전익 시스템을 만드는 방법을 제안한다. 그리고 알고리즘을 검증하기 위해 상용 안정성 증대 장치의 출력과 개발한 알고리즘의 출력 비교하였다. 최종적으로 검증된 알고리즘을 활용하여 자동 비행이 가능한 무인 회전익 시스템을 체계를 구축하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권2호
• /
• pp.186-196
• /
• 2017

In order to resolve the trimming difficulty in rotor CFD calculations, a high-efficiency and improved "delta trim method" is established to compute the blade control settings that are necessary to identify the blade motion. In this method, a simplified model which combines the blade element theory and different inflow models is employed to calculate the control settings according to the target aerodynamic forces, then it is coupled into a CFD solver with unsteady Navier-Stokes equations by the delta methodology, which makes the control settings and aerodynamics calculated and updated in the meantime at every trim cycle. Different from the previous work, the current research combines the inflow model based on prescribed wake theory. Using the method established, the control settings and aerodynamic characteristics of Helishape 7A, AH-1G and Caradonna-Tung rotors are calculated. The influence of different inflow models on trimming calculations is analyzed and the computational efficiency of the current "delta trim method" is compared with that of the "CFD-based trim method". Furthermore, for the sake of improving the calculation efficiency, a novel acceleration factor method is introduced to accelerate the trimming process. From the numerical cases, it is demonstrated that the current "delta trim method" has higher computational efficiency than "CFD-based trim method" in both hover and forward flight, and up to 70% of the amount of calculation can be saved by current "delta trim method" which turns out to be satisfactory for engineering applications. In addition, the proposed acceleration factor shows a good ability to accelerate the trim procedure, and the prescribed wake inflow model is always of better stability than other simple inflow models whether the acceleration factor is utilized in trimming calculations.