• Composites Research
• /
• 제17권3호
• /
• pp.29-37
• /
• 2004

본 연구에서는 대변형 보이론을 이용하여 정지 비행 시 복합재 무베어링 로우터 시스템의 공력탄성학적 안정성 해석을 수행하였다. 무베어링 로우터 시스템은 유연보, 토오크 튜브, 피치 링크, 그리고 메인 블레이드로 구성된다. 유연보, 토오크 튜브, 그리고 메인 블레이드를 각각 플랩 굽힘, 리드-래그 굽힘, 비틀림 그리고 축 방향 변형의 탄성 운동을 하는 보로 가정하고, 1차원 보 요소로 모델링을 하였다. 또한, 유연보를 복합재료 적층판으로 구성된 비틀림에 유연한 직사각형 단면을 갖는 보로 모델링 하여, 1차원 보 해석에 필요한 유효 단면 상수를 얻었다. 외력으로는 2차원 준-정상 공기력 모델을 적용하였으며, 보의 유한 요소 지배방정식은 헤밀턴 원리(Hamilton's principle)를 이용하여 얻었다. 공력 탄성학적 안정성 해석을 수행하기 위하여 p-k 방법을 이용하였으며, 유연보의 적층각과 적층 순서에 따른 구조적 연성이 무베어링 로우터 시스템의 공란성 안정성에 미치는 영향을 알아보았다.

• 한국음향학회지
• /
• 제32권3호
• /
• pp.208-213
• /
• 2013

캠축의 진동 응답을 구하기 위해 캠축을 불균형 다단계 로터 베어링계로 해석하였으며, 복잡한 형상과 하중조건을 고려하여 유한요소법을 사용하였다. 유한요소 방정식을 유도한 후에 Newmark 법을 사용하여 진동 응답을 구하였다. V-8 엔진 캠축의 회전 진동 응답을 구하여 측정치와 비교하였다. 캠축의 변동 응력을 구하고, 응력 집중 효과를 고려한 다음에 Goodmann 식에 근거하여 피로 해석을 수행하였다. 캠축의 회전 진동에서는 굽힘 효과가 지배적이며, 인접하는 베어링 간격에 가장 큰 영향을 받는다. 캠축에 가해지는 하중의 변화가 클 경우에는 하중의 변화에 상응하여 시간에 따라 변화하는 베어링 계수를 적용하여야 함을 알 수 있었다.

• 항공우주시스템공학회지
• /
• 제17권2호
• /
• pp.45-55
• /
• 2023

본 연구에서는 V-22 Osprey 틸트로터의 25% 축소 모델인 TRAM에 대하여 회전익기 통합 해석 코드인 CAMRAD II를 이용하여 프롭로터의 Aeromechanics 모델링과 블레이드 및 피치 링크에 대한 구조 하중 해석을 수행한 후, DNW 풍동 시험 및 선행 해석 연구 결과와 상호 비교하였다. 본 연구에서는 저속 전진 비행 시 블레이드 플랩 굽힘 모멘트의 구조 하중 및 진동 하중 변화를 풍동 시험 결과에 대하여 비교적 잘 예측하였다. 리드-래그 굽힘 및 비틀림 모멘트의 구조 하중 및 진동 하중 해석은 풍동 시험과 다소 다르게 얻어졌으나, 평균값을 제거하였을 때 로터 회전 한 바퀴당 구조 하중 해석 결과가 풍동 시험 및 선행 해석 연구와 비교적 유사하였다. 피치 링크의 구조 하중 및 진동 하중 해석은 전반적으로 선행 연구의 시험 및 해석 결과와 유사하게 얻어졌다. 마지막으로 블레이드 구조 진동 하중의 조화 성분 해석 및 비교를 통하여 블레이드 리드-래그 굽힘 및 비틀림 모멘트의 오차 발생 원인을 분석하였다.

• 대한기계학회논문집A
• /
• 제24권7호
• /
• pp.1661-1672
• /
• 2000

An immune system has powerful abilities such as memory, recognition and learning how to respond to invading antigens, and has been applied to many engineering algorithms in recent year. In this pap er, the combined optimization algorithm (Immune- Genetic Algorithm: IGA) is proposed for multi-optimization problems by introducing the capability of the immune system that controls the proliferation of clones to the genetic algorithm. The optimizing ability of the proposed combined algorithm is identified by comparing the result of optimization with simple genetic algorithm for two dimensional multi-peak function which have many local optimums. Also the new combined algorithm is applied to minimize the total weight of the shaft and the transmitted forces at the bearings. The inner diameter oil the shaft and the bearing stiffness are chosen as the design variables. The dynamic characteristics are determined by applying the generalized FEM. The results show that the combined algorithm and reduce both the weight of the shaft and the transmitted forces at the bearing with dynamic conatriants.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.865-868
• /
• 2005

This paper presents analysis of dynamic characteristics of a high-speed milling spindle with a built-in motor. The spindle system with a built-in motor can be used to simplify the structure of machine tools. to improve tire machining flexibility of machine. tools, and to perform the high speed machining. In this system the shaft is usually assumed as a rigid rotor. In the spindle system design, it is very important to improve modal characteristics, and modal analysis is performed in the first place. Therefore in this paper, on the assumption that supporting bearings of spindle was selected most suitable condition, analyzed dynamic characteristics of a high-speed spindle according to its position. Optimal design was applicated to select most suitable position of bearings. Considered tile mass and stiffness effects of the built-in motor's rotor are analyzed by numerical method. The result shows the natural frequency of 1st bending mode of spindle.

• Wind and Structures
• /
• 제33권6호
• /
• pp.437-446
• /
• 2021

As wind turbine rotors increase, the overall loads and dynamic response become an important issue. This problem is augmented by the exposure of wind turbines to severe atmospheric events with unconventional flows such as tornadoes, which need specific designs not included in standards and codes at present. An experimental study was conducted to analyze the loads induced by a tornado-like vortex (TLV) on horizontal-axis wind turbines (HAWT). A large-scale tornado simulation developed in The Wind Engineering, Energy and Environment (WindEEE) Dome at Western University in Canada, the so-called Mode B Tornado, was employed as the TLV flow acting on a rigid wind turbine model under two rotor operational conditions (idling and parked) for five radial distances. It was observed that the overall forces and moments depend on the location and orientation of the wind turbine system with respect to the tornado vortex centre, as TLV are three-dimensional flows with velocity gradients in the radial, vertical, and tangential direction. The mean bending moment at the tower base was the most important in terms of magnitude and variation in relation to the position of the HAWT with respect to the core radius of the tornado, and it was highly dependent on the rotor Tip Speed Ratio (TSR).

• Wind and Structures
• /
• 제34권3호
• /
• pp.303-312
• /
• 2022

As wind turbine rotors increase, the overall loads and dynamic response become an important issue. This problem is augmented by the exposure of wind turbines to severe atmospheric events with unconventional flows such as tornadoes, which need specific designs not included in standards and codes at present. An experimental study was conducted to analyze the loads induced by a tornado-like vortex (TLV) on horizontal-axis wind turbines (HAWT). A large-scale tornado simulation developed in The Wind Engineering, Energy and Environment (WindEEE) Dome at Western University in Canada, the so-called Mode B Tornado, was employed as the TLV flow acting on a rigid wind turbine model under two rotor operational conditions (idling and parked) for five radial distances. It was observed that the overall forces and moments depend on the location and orientation of the wind turbine system with respect to the tornado vortex centre, as TLV are three-dimensional flows with velocity gradients in the radial, vertical, and tangential direction. The mean bending moment at the tower base was the most important in terms of magnitude and variation in relation to the position of the HAWT with respect to the core radius of the tornado, and it was highly dependent on the rotor Tip Speed Ratio (TSR).

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.258-265
• /
• 2001

Turbine blade is subject to force of three type ; torsional force by torsion-mount, centrifugal force by rotation of rotor and cyclic bending force by steam pressure. Cyclic bending force of them is main factor on fatigue fracture. In the X-ray diffraction method, the change in the values related to plastic deformation and residual stress near the fracture surface mat be determined, and information of internal structure of material can be obtained. Therefore, to find a fracture mechanism of torsion-mounted blade in nuclear plant, based on the information from the fracture surface obtained by fatigue test, the correlation of X-ray parameter and fracture mechanics parameter was determined, and then the load applied to actual broken turbine blade parts was predicted. Failure analysis is performed by finite element method and Goodman diagram on torsion-mounted blade.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.652-655
• /
• 2008

Despite of the laminar-turbulent transition region co-exist with fully turbulence region around the leading edge of an airfoil, still lots of researchers apply to fully turbulence models to predict aerodynamic characteristics. It is well known that fully turbulent model such as standard k-${\varepsilon}$ model couldn't predict the complex stall and the separation behavior on an airfoil accurately, it usually leads to over prediction of the aerodynamic characteristics such as lift and drag forces. So, we apply correlation based transition model to predict aerodynamic performance of the NREL (National Renewable Energy Laboratory) Phase IV wind turbine. And also, compare the computed results from transition model with experimental measurement and fully turbulence results. Results are presented for a range of wind speed, for a NREL Phase IV wind turbine rotor. Low speed shaft torque, power, root bending moment, aerodynamic coefficients of 2D airfoil and several flow field figures results included in this study. As a result, the low speed shaft torque predicted by transitional turbulence model is very good agree with the experimental measurement in whole operating conditions but fully turbulent model(k-${\varepsilon}$) over predict the shaft torque after 7m/s. Root bending moment is also good agreement between the prediction and experiments for most of the operating conditions, especially with the transition model.

• Wind and Structures
• /
• 제32권3호
• /
• pp.267-281
• /
• 2021

Bending-twisting coupling induced in big composite wind turbine blades is one of the passive control mechanisms which is exploited to mitigate loads incurred due to deformation of the blades. In the present study, flutter characteristics of bend-twist coupled blades, designed for load alleviation in wind turbine systems, are investigated by time-domain analysis. For this purpose, a baseline full GFRP blade, a bend-twist coupled full GFRP blade, and a hybrid GFRP and CFRP bend-twist coupled blade is designed for load reduction purpose for a 5 MW wind turbine model that is set up in the wind turbine multi-body dynamic code PHATAS. For the study of flutter characteristics of the blades, an over-speed analysis of the wind turbine system is performed without using any blade control and applying slowly increasing wind velocity. A detailed procedure of obtaining the flutter wind and rotational speeds from the time responses of the rotational speed of the rotor, flapwise and torsional deformation of the blade tip, and angle of attack and lift coefficient of the tip section of the blade is explained. Results show that flutter wind and rotational speeds of bend-twist coupled blades are lower than the flutter wind and rotational speeds of the baseline blade mainly due to the kinematic coupling between the bending and torsional deformation in bend-twist coupled blades.