• Journal of the Korea Institute of Building Construction
• /
• v.7 no.1 s.23
• /
• pp.79-84
• /
• 2007

Selection of proper root barrier as destination part of greening is very important in Root penetration resistance plan. To select proper root barrier, it need to understand composition of greening part, size, kind of plant, connection with waterproofing layer. In this point of view, we have establish greening on the roof or concrete structure, not been understand the structural mechanism. It means that we misunderstood about purpose of greening and using it. So, chosen materials and construction method was not proper for greening, it caused water leakage and decrease performance of concrete structure. Therefore, we would suggest 5 items of test methods considering environmental condition for green roof. Watertightness by water of greening part, root penetration resistance test by root penetration, bacteria resistance by must or bacteria in soil, chemical resistance by rain and chemical agent of fertilizer, and load resistance by soil depth, size of plant. These suggested test methods could be referred as guideline to test in green roof system because of not exist any performance appraisal guideline or standard. Consequently, it should be analysis as technical and institutional subdividing test methods and it need to study constantly as varied angles.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.241-244
• /
• 2005

Many building detection methods mainly rely on line segments extracted from aerial or satellite imagery. Building detection methods based on line segments, however, are difficult to succeed in high resolution satellite imagery such as IKONOS imagery, for most buildings in IKONOS imagery have small size of roofs with low contrast between roof and background. In this paper, we propose an efficient method to extract line segments and group them at the same time. First, edge preserving filtering is applied to the imagery to remove the noise. Second, we segment the imagery by watershed method, which collects the pixels with similar intensities to obtain homogeneous region. The boundaries of homogeneous region are not completely coincident with roof boundaries due to low contrast in the vicinity of the roof boundaries. Finally, to resolve this problem, we set up snake model with segmented region boundaries as initial snake's positions. We used a greedy algorithm to fit a snake to roof boundary. Experimental results show our method can obtain more .correct roof boundary with small size and low contrast from IKONOS imagery. Snake algorithm, building roof detection, watershed segmentation, edge-preserving filtering

• Journal of Korean Society of Rural Planning
• /
• v.16 no.3
• /
• pp.1-10
• /
• 2010

The purpose of this study is to find out the color preference on rural rooftop color. Today, public profit value of a rural community has been heavily recognized in the areas of preservation of pro-environmental and traditional life styles and foundation of collective community. Comparatively with urban, rural town conserves the scenic of those days when the historic landscape existed. Therefore, elements of historic and tradition in rural town are interesting resources to people who want traditional experience. Color is one of the most influenced elements for the image of Landscape. On the other hand, radical modernization has brought conflicting color element that does not blend with existing environmental color. Among others, roof represents one of the important traits of rapidly developing rural community due to vast amount of space it covers. In order to come up with more appropriate coloring scheme, it is necessary determine color that forms a balance with present conditions of rural life and historic landscape. This study provides more objective rooftop coloring selection process by employing additional surveys regarding color image adjective. I justified necessity of the balance between environmental color and roof color through analyzing correlation between environmental color of the rural town and Color Image Scale of the preliminary selection of roofs.

• Journal of Environmental Impact Assessment
• /
• v.19 no.3
• /
• pp.259-270
• /
• 2010

We conducted human risk assessment for exposure to inhalation of chemical substances emitted from the storage tanks of petroleum refineries. To assess human risk, this study calculated chemical emissions from the external floating roofs on storage tank at petroleum refineries, as well as concentrations thereof in the ambient air using the K-SCREEN model, and then determined risk in accordance with the Reference Concentration (RfC) values and Inhalation Unit Risk criteria developed by the US Environmental Protection Agency. The results indicated that non-carcinogenic chemicals have a hazard quotient of less than 1, meaning they have an insignificant effect on human health for residential areas near the storage tanks. Among the known carcinogens, the hazard risk for benzene slightly exceeded $10^{-6}$, indicating the need for corrective reduction measures. The methodology for health impact assessment devised herein provides findings useful in decision making for policy makers and the general public with respect to construction of industrial complexes. However, the methodology proposed herein does have limitations, including discrepancy in results induced by use of U.S. data (due to the lack of usable domestic data). More systematic studies from related researchers will be needed to address these issues and produce more reliable outcomes.

• Korean Institute of Interior Design Journal
• /
• v.19 no.6
• /
• pp.129-140
• /
• 2010

Malaysian traditional houses are basically post-and-beam structures raised on pillars, with gabled roofs. They were designed and built by the people themselves to meet specific needs, accommodating the values, economies and ways of life of cultures that produce them. The main purpose of this study is to understand the form and culture of Traditional houses in Malaysia through two parts. The first part is to summarize the general characteristic of traditional houses of Malaysia in the aspect of two different perspectives. One is the climate perspective, for which the analysis was made on the primary characteristics such as the climate, material, structure of the vernacular houses. The other one is the social-cultural perspective which try to find the religion, belief, life style and social and family relationship which controlled the forms of the housing under the surface. As a result, this study summarise and find the outstanding and unique meaning and definition of the traditional houses in Malaysia. The second part is to survey the specific case of the traditional house. Rumah Penghulu which were located in Kuala Lumpur were analyzed. As a result, this study summarise and find the formal and symbolic features of the traditional Malay houses. We hope that this study addresses the blank area in Korean housing studies about Southeast Asia countries which have not been clearly introduced yet.

• Journal of the Korean Institute of Rural Architecture
• /
• v.4 no.1
• /
• pp.71-86
• /
• 2002

This research aims to illustrate the structure of the ancient Korean wooden buildings by a comparative study of the historical resources such as stone remains, wall paintings historiographies and excavations. As stone pagodas are the most typical stone remains, I selected for analysis some stone pagodas which contain architectural elements and results of the study are as follows: 1) The number of stories and structural modes of the base stone part show the wooden architectural aspects: they have one or two stories and their base part is constructed in the mode of assembling rectangular stones. 2) The body of the pagoda contains such architectural elements as pillars, door and windows, crossbeams, balcony, bracket sets. 3) The roof of the stone pagoda contains such architectural elements as eaves, roofs and modes of stone assembling. The results inferred through this research could be of help for further comparative studies with the other secondary materials by providing basic knowledge for it.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.2
• /
• pp.114-122
• /
• 2008

Roof greening recently emerged to be an important issue of environmental policies in a city. To cover roofs of buildings with green vegetation gives chances not only to improve urban environmental function but also provides the opportunities of environmental learning and convenience for users in the building. This study aimed to give directions for roof greening plan to designers by acknowledging the relationships between ecological and utilizational effectiveness. 10 sites and 15 variables were adopted to measure the relationships. As a result, no positive correlations was found between them. One of the results in correlation analysis among variables, however, showed that the roof gardens have high utilizational effectiveness only when a green roof was made by focusing on ecological functions in addition to the concepts that will guarantee user's convenience such as accessibility, entrance and exit, facilities for convenience and learning. The results implies that a green roof has to be designed considering multi-functional effects. Correlation between species of vegetation and the number of daily users, average staying hours, and attending level for environment educational programs were not significant. These findings imply that when a green roof has to be take high utilizational effectiveness, both plentiful vegetation species and design concepts for users' convenience are should be considered.

• Korean Institute of Interior Design Journal
• /
• v.14 no.5 s.52
• /
• pp.10-17
• /
• 2005

This Study is concerned with the acceptance of Western timber structure and the interior space of church buildings in the early modern period in Korea. Timber roofs have represented a wide variety of constructional forms and have been fundamental to any technological appraisal of the evolution of both of Western and Eastern architecture. Especially the roof structure of the church buildings reflects the technological level, aesthetic sense, and spacial concepts of the age. Between Western timber structure and Korean timber structure, there are many differences in not only structural form but also form of roof, members, load, frame system and etc. And there were various types of framing technique such as timber truss, timber arch, timber vault in the western style church architecture in the early modern period in Korea. I have summarized the character of the acceptance process of Western timber structure and the influences on the interior space of church buildings.

• Steel and Composite Structures
• /
• v.15 no.4
• /
• pp.379-397
• /
• 2013

Conoidal shells are doubly curved stiff surfaces which are easy to cast and fabricate due to their singly ruled property. Application of laminated composites in fabrication of conoidal shells reduces gravity forces and mass induced forces compared to the isotropic constructions due to the high strength to weight ratio of the material. These light weight shells are preferred in the industry to cover large column free open spaces. To ensure design reliability under service conditions, detailed knowledge about different behavioral aspects of conoidal shell is necessary. Hence, in this paper, static bending, free and forced vibration responses of composite conoidal shells are studied. Lagrange's equation of motion is used in conjunction with Hamilton's principle to derive governing equations of the shell. A finite element code using eight noded curved quadratic isoparametric elements is developed to get the solutions. Uniformly distributed load for static bending analysis and three different load time histories for solution of forced vibration problems are considered. Eight different stacking sequences of graphite-epoxy composite and two different boundary conditions are taken up in the present study. The study shows that relative performances of different shell combinations in terms of static behaviour cannot provide an idea about how they will relatively behave under dynamic loads and also the fact that the points of occurrence of maximum static and dynamic displacement may not be same on a shell surface.

• Wind and Structures
• /
• v.19 no.6
• /
• pp.623-647
• /
• 2014

In this paper, a probability distribution which is consistent with the observed phenomenon at the roof corner and, also on other portions of the roof, of a low-rise building is proposed. The model is consistent with the choice of probability density function suggested by the statistical thermodynamics of open systems and turbulence modelling in fluid mechanics. After presenting the justification based on physical phenomenon and based on statistical arguments, the fit of alpha-stable distribution for prediction of extreme negative wind pressure coefficients is explored. The predictions are compared with those actually observed during wind tunnel experiments (using wind tunnel experimental data obtained from the aerodynamic database of Tokyo Polytechnic University), and those predicted by using Gumbel minimum and Hermite polynomial model. The predictions are also compared with those estimated using a recently proposed non-parametric model in regions where stability criterion (in skewness-kurtosis space) is satisfied. From the comparisons, it is noted that the proposed model can be used to estimate the extreme peak negative wind pressure coefficients. The model has an advantage that it is consistent with the physical processes proposed in the literature for explaining large fluctuations at the roof corners.