• Journal of the Korean Society for Heat Treatment
• /
• v.20 no.2
• /
• pp.84-93
• /
• 2007

Microstructural changes during tempering at the temperature range of $300^{\circ}C{\sim}700^{\circ}C$ for the nitrogen-permeated STS 410 and 410L martensitic stainless steels has been investigated. After nitrogen permeation at temperature between 1050 and $1150^{\circ}C$, the surface layer appeared fine $Cr_2N$ of square and rod types in the martensite matrices. Hardness of the nitrogen-permeated surface layer represented 680Hv and 625Hv, respectively, for 410 and 410L steels. It is considered that the fine homogeneously dispersive effect of precipitates by nitrogen caused the increased hardness. Due to the counter current effect of carbon from interior to surface during nitrogen diffusion from surface to interior, the 0.1%C alloyed 410 steel showed the low nitrogen content of 0.025% compared with 0.045% of 410L steel at the distance of $100{\mu}m$ from the surface. Tempering of nitrogen-alloyed 410 and 410L showed the maximum hardness at $450^{\circ}C$. This maximum hardness was considered to be the secondary hardening effect of very fine carbide and nitride. The decrease in hardness at $700^{\circ}C$ was the softening effect of the matrix due to the precipitation of many needle-shaped $Cr_2N$ for 410 steel and the precipitation of coarse nitride of $Cr_2N$ in line with the spherical precipitates with directionality for 410L steel. For 410 steel, the corrosion resistance of nitrogen permeated surface in the solution of 1 N $H_2SO_4$ were nearly unchanged, however the superior corrosion resistance was obtained for nitrogen permeated 410L steel compared to the solution annealed condition.

• Economic and Environmental Geology
• /
• v.50 no.1
• /
• pp.27-34
• /
• 2017

Mineral carbonation for the storage of carbon dioxide is a CCS option that provides an alternative for the more widely advocated method of geological storage in underground formation. Carbonation of magnesium- or calcium-based minerals, especially the carbonation of waste materials and industrial by-products is expanding, even though total amounts of the industrial waste are too small to substantially reduce the $CO_2$ emissions. The mineral carbonation was performed with steelmaking reduction slag as starting material. The steelmaking reduction slag dissolution experiments were conducted in the $H_2SO_4$ and $NH_4NO_3$ solution with concentration range of 0.3 to 1 M at $100^{\circ}C$ and $150^{\circ}C$. The hydrothermal treatment was performed to the starting material via a modified direct aqueous carbonation process at the same leaching temperature. The initial pH of the solution was adjusted to 12 and $CO_2$ partial pressure was 1MPa for the carbonation. The carbonation rate after extracting $Ca^^{2+}$ under $NH_4NO_3$ was higher than that under $H_2SO_4$ and the carbonation rates in 1M $NH_4NO_3$ solution at $150^{\circ}C$ was dramatically enhanced about 93%. In this condition well-faceted rhombohedral calcite, and rod or flower-shaped aragonite were appeared together in products. As the concentration of $H_2SO_4$ increased, the formation of gypsum was predominant and the carbonation rate decreased sharply. Therefore it is considered that the selection of the leaching solution which does not affect the starting material is important in the carbonation reaction.

• Applied Microscopy
• /
• v.32 no.1
• /
• pp.17-30
• /
• 2002

The retinae of Todarodes pacificus and Octopus minor are divided into four layers that are an outer segment, a rod base region, an inner segment, and a plexiform layer, respectively. The retina of Octopus minor is about $20{\mu}m$ thicker ($400{\sim}420{\mu}m$) than that of Todarodes pacificus ($385{\sim}400{\mu}m$). A retina is composed of visual cells and supporting cells. The microvilli of length $0.6{\sim}0.7{\mu}m$ are packed densely on top of the supporting cells of Octopus minor while they are not found in Todarodes pacificus. The visual cells and supporting cells have pigment granules that exclude light. In case of Todarodes pacificus, the pigment granules of the visual cell are larger ($2.0{\times}0.5{\mu}m$) than those of the supporting cell ($1.0{\times}0.3{\mu}m$). But, the sizes of both cells are similar in Octopus minor. In the upper portion of a visual cell, microvilli shaped like a comb are forming a rhabdome (diameter, 60 nm) of a hexagonal structure. The rhabdome consists of 4 rhabdomere and the total area of a rhabdom of Octopus minor is larger than that of Todarodes pacificus. The synaptosome constructing a plexiform layer in Todarodes pacificus are divided into two types, each of which possess electron dense-core vesicles and electron lucent vesicles, respectively. Octopus minor also has two types of synaptosomes but each type comprises a mixture of electron dense vesicles and electron lucent vesicles, and electron lucent vesicles only, respectively, which is different from the case of Todarodes pacificus.

• Applied Microscopy
• /
• v.22 no.2
• /
• pp.84-96
• /
• 1992

This study was carried out to examine the $H^+$ transport mechanism by observing the properties of cellular membrane having an ${\alpha}$ type of carbonic anhydrase (CA)-containing cells in turtle urinary bladder. The urinary bladder consists of a heterogenous population of cells. As a result of fine observation with traditional thin-section electron microscopy. the bladder epithelium has three different cell types on mucosal surface. They are a basal cell, a granular cell and a third type of CA-rich cell. The CA-rich cells are divided into two distinct smaller groups within them and called them ${\alpha}$ type and ${\beta}$ type of CA cells. The ${\alpha}$ type of CA cells are responsible for the proton secretion using the proton pumps on the apical plasma membrane, while the ${\beta}$ type of CA cells secrete bicarbonate via an oppositely-directed proton pumps in their basolateral plasma membrane. After performing the freeze-fracture technique, it was shown that there were distributed a large number of intramembranous particles having a special structure on the apical membrane of ${\alpha}$ type of CA-rich cells in the process of their $H^+$ secretion. In turtle bladder ${\alpha}$ type of CA-rich cells, this particle was the only prominent structure in the apical membrane. These intramembrane rod-shaped particles probably represent the integral membrane components of the proton pump. This result may explain that carbonic anhydrase within epithelial cell of urinary bladder takes part in formation of $H^+$ and bicarbonate, that active transport of $H^+$ is done, and that the reabsorption of bicarbonate suggests transport mechanism containing $H^+$ secretion. However, it seems that more studies are required for considering their regular transport pathway.

• Journal of Embryo Transfer
• /
• v.25 no.4
• /
• pp.267-272
• /
• 2010

The present study was to investigate the source of contamination during semen processing for in vitro uses. In the present study, frozen semen was prepared from liquid semen in our laboratory for in vitro fertilization (IVF) experiments due to lack of fresh semen. Antibiotics were added in the frozen semen extender (kanamycin and gentamicin) and in vitro culture (IVC) medium (gentamicin) for further inhibiting growth of microorganisms. Nevertheless, proliferations of microorganisms were observed in IVC culture drop during culturing of IVF embryos using frozen semen. Randomly 3 samples were taken from the liquid semen, frozen semen and egg yolk. Contaminated IVC medium, frozen-thawed semen, liquid semen and egg yolk were cultured in de Man, Rogosa and Sharpe (MRS) agar medium. Whitish colonies were detected in contaminated IVC drop, frozen-thawed semen samples and egg yolk but no colonies were formed in liquid semen samples. Gram-negative and rod-shaped identical bacteria were found in both frozen-thawed semen sample and contaminated IVC drop and egg yolk samples. Enterobacter cloacae were confirmed by API 20E kit according to manufacturer's instruction with identification value (% ID) 94.3% and T index 0.88. Antibiotic susceptibility tests were done according to Clinical and Laboratory Standards Institute (CLSI) by using ampicillin, amikacin, cephalothin, gentamicin, kanamycin, tetracycline, oxytetracycline, sulfamethoxazole trimethoprim, norfloxacin and ciprofloxacin test. Among them Enterobacter cloacae were resistant to ampicillin, amikacin, cephalothin, gentamicin, kanamycin but susceptible to tetracycline, oxytetracycline, sulfamethoxazole trimethoprim, norfloxacin and ciprofloxacin. From these findings it could be suggested that this contamination sources might be from egg yolk.

• Journal of Life Science
• /
• v.21 no.3
• /
• pp.444-450
• /
• 2011

Perchlorate ($ClO_4^-$) is a contaminant found in surface water and soil/ground water. Autotrophic perchlorate-reducing bacteria (PRB) use hydrogen gas ($H_2$) as an electron donor to remove perchlorate. Since iron corrosion can produce $H_2$, feasibility of autotrophic perchlorate-removal using zero-valent iron (ZVI) was examined in this study using activated sludge that is easily available from a wastewater treatment plant. Batch test showed that activated sludge microorganisms could successfully degrade perchlorate in the presence of ZVI. The perchlorate biodegradation was confirmed by molar yield of $Cl^-$ as perchlorate was degraded. Scanning electron microscope revealed that rod-shaped microorganisms on the surface of iron particles used for the autotrophic perchlorate-removal, suggesting that iron particles could serve as supporting media for the formation of biofilm as well. DGGE analyses revealed that microbial profile of the inoculum (activated sludge) was different from that of biofilm sample obtained from the ZVI-added enrichment culture used for $ClO_4^-$-degradation. A major band of the biofilm sample was most closely related to the class Clostridia.

• Journal of Ginseng Research
• /
• v.32 no.3
• /
• pp.270-274
• /
• 2008

A bacterium isolated from contaminated white ginseng was identified using API kit and electron microscope. This isolate was determined as rod shaped bacterium having about 1.0 ${\mu}m$ in diameter and 2.0 to 6.0 ${\mu}m$ in length. It had motility by peritrichous flagellum. The isolate had ${\beta}-galactosidase$, arginine dihydrolase and ornithin decarboxylase. It did not have ability not only to use citrate as sole carbon source and but also to produce $H_2S$. However, it could ferment glucose, manitol, sorbitol, rhamnose, arabinose and amygdalin. From these obserbations, the isolate was identified as Citrobacter sp. Ginseng saponin was added to culture of Citrobacter sp. in order to investigate saponin's influence on its growth. The strain was incubated at $38^{\circ}C$ for 3 days after addition of 0.05, 0.5, 2.0 and 4.0% (w/v) of saponin, respectively and the growth rates was investigated. The relative bacterial growth inhibition rates showed 28.6, 66.7, 92.4 and 97.7%, respectively, when compared with saponin non-treated group. These results suggest that the growth of Citrobacter sp. is inhibited by saponin in a concentration-dependent manner.

• Korean Journal of Food Science and Technology
• /
• v.29 no.5
• /
• pp.1028-1032
• /
• 1997

The strain No. 33, which produces cellulose-degrading enzyme, was isolated from soil. Yellow halo was identified when the culture supernatant of the strain was loaded onto agar plate containing 2.0% CMC using paper disc method. From scanning electron microscopic observation, the morphology of the stain was rod-shaped. For identification, several biochemical characteristics were tested, and this strain was identified to Bacillus sp. So, we named this strain as Bacillus sp. No. 33. The maximal growth was observed when the stain was cultured in the medium containing 1.0% glucose, 3.0% yeast extract, 0.5% $KH_2PO_4$, 0.02% $MgSO_4{\cdot}7H_2O$, pH 7.0 at $30^{\circ}C$ for 39 hours with shaking. The maximal enzyme production was accomplished using the medium containing 4.0% CMC, 2.0% yeast extract, 0.5% $KH_2PO_4$, 0.04% $MgSO_4{\cdot}7H_2O$, pH 7.0 at $30^{\circ}C$ for 42 hours with shaking.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.4
• /
• pp.444-450
• /
• 2013

A Gram-negative, strictly aerobic, non-motile, non-spore-forming, and rod-shaped bacterial strain designated FW-$6^T$ was isolated from a freshwater sample and its taxonomic position was investigated by using a polyphasic approach. Strain FW-$6^T$ grew optimally at $10-42^{\circ}C$ and at pH 7.0 on nutrient and R2A agar. Strain FW-$6^T$ displayed ${\beta}$-glucosidase activity that was responsible for its ability to transform ginsenoside $Rb_1$ (one of the dominant active components of ginseng) to Rd. On the basis of 16S rRNA gene sequence similarity, strain FW-$6^T$ was shown to belong to the family Sphingomonadaceae and was related to Novosphingobium aromaticivorans DSM $12444^T$ (98.1% sequence similarity) and N. subterraneum IFO $16086^T$ (98.0%). The G+C content of the genomic DNA was 64.4%. The major menaquinone was Q-10 and the major fatty acids were summed feature 7 (comprising $C_{18:1}{\omega}9c/{\omega}12t/{\omega}7c$), summed feature 4 (comprising $C_{16:1}{\omega}7c/iso-C_{15:0}2OH$), $C_{16:0}$, and $C_{14:0}$ 2OH. DNA and chemotaxonomic data supported the affiliation of strain FW-$6^T$ to the genus Novosphingobium. Strain FW-$6^T$ could be differentiated genotypically and phenotypically from the recognized species of the genus Novosphingobium. The isolate that has ginsenoside converting ability therefore represents a novel species, for which the name Novosphingobium ginsenosidimutans sp. nov. is proposed, with the type strain FW-$6^T$ (= KACC $16615^T$ = JCM $18202^T$).

• Macromolecular Research
• /
• v.12 no.1
• /
• pp.127-133
• /
• 2004

We have studied the surface micelle formation of polystyrene-b-poly(2-vinyl pyridine) (PS-b-P2VP) at the air-water interface. A series of four PS-b-P2VPs were synthesized by anionic polymerization, keeping the PS block length constant (28 kg/㏖) and varying the P2VP block length (1, 11, 28, or 59 kg/㏖). The surface pressure-area ($\pi$-A) isotherms were measured and the surface morphology was studied by atomic force microscopy (AFM) after Langmuir-Blodgett film deposition onto silicon wafers. At low surface pressure, the hydrophobic PS blocks aggregate to form pancake-like micelle cores and the hydrophilic P2VP block chains spread on the water surface to form a corona-like monolayer. The surface area occupied by a block copolymer is proportional to the molecular weight of the P2VP block and identical to the surface area occupied by a homo-P2VP. It indicates that the entire surface is covered by the P2VP monolayer and the PS micelle cores lie on the P2VP monolayer. As the surface pressure is increased, the $\pi$-A isotherm shows a transition region where the surface pressure does not change much with the film compression. In this transition region, which displays high compressibility, the P2VP blocks restructure from the monolayer and spread at the air-water interface. After the transition, the Langmuir film becomes much less compressible. In this high-surface-pressure regime, the PS cores cover practically the entire surface area, as observed by AFM and the limiting area of the film. All the diblock copolymers formed circular micelles, except for the block copolymer having a very short P2VP block (1 kg/㏖), which formed large, non-uniform PS aggregates. By mixing with the block copolymer having a longer P2VP block (11 kg/㏖), we observed rod-shaped micelles, which indicates that the morphology of the surfaces micelles can be controlled by adjusting the average composition of block copolymers.