• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2003년도 춘계학술발표회 논문집
• /
• pp.219-222
• /
• 2003

Even through hundreds of meters high steep slope is stable, only several ten meters high dull slope could be collapsed. This means that stability of slope is depend on the slope of a surface of discontinuity like faults existing in rock floor. The existence and nonexistence of a discontinuity surface have a very important effect to the stability of a rock floor slope, and examination for geologic peculiarity is one of the most important pant for investigation of stabilities. Accordingly, in the study, we extracted three dimension coordinates of slope with close photogrammetry, and through interpretations of three dimensions' position of fault within rock floor slope, we expect this will be use as a important sauces when evaluate stabilities of rock floor slope.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1285-1289
• /
• 2008

Increasing the flood control capacity's link that is enforcing to existing dam by unusual change of weather, While build planing construction by exiting spillway of tunnel type to dam, could know that part bed rock is formed as is different with design. Grasped topography of research area and geology state to definite distribution aspect of different bed rock, Place that achieved Surface geological Survey and correct Survey is difficult in some section enforced Electrical resistivity dipole-dipole investigation. Grasped stratigraphy distribution confirmation and fracture or weathering zone making out siding 2D-Resistivity Electrical resistivity diagram and Reverse analysis diagram, examining closely soil weathered rock rock's distribution state, established stability countermeasure plan

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 춘계학술발표회논문집
• /
• pp.203-208
• /
• 2004

Recently, digital image is increasing greatly practical use degree in several industry fields including construction. And interest about 3D digital image that can express practical object realistically is augmented greatly. In this study, developed 3D digital image generation system based on digital photogrammetry and created 3D digital image for object. And, wished to verify of 3D digital image through comparative analysis with processing result by digital photogrammetry system been using much the latest for acquisition of 3D information. Also, wished to apply to surface information acquisition about rock slope and execute investigation about discontinuity of joint etc. As the result, could created 3D digital image for object using the 3D digital image generation system developing in this study, and acquire surface information about rock slope efficiently.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 가을 학술발표회 논문집
• /
• pp.161-184
• /
• 2001

Rock masses usually contain such features as bedding planes, faults, fissures, fractures, joints and other mechanical defects which, although formed from a wide range of geological processes, posses the common characteristics of low shear strength, negligible tensile strength and high fluid conductivity compared with the surrounding rock material. In the engineering context here, the discontinuities can be the single most important factor governing the deformability, strength and permeability of the rock mass. Moreover, a particularly large and persistent discontinuity could critically affect the stability of any surface or underground excavation. For these reasons, it is necessary to develop a thorough understanding of the geometrical, mechanical and hydrological properties of discontinuities and the way in which these will affect rock mechanics and hence rock engineering.

• 터널과지하공간
• /
• 제13권4호
• /
• pp.279-286
• /
• 2003

최근의 터널설계에 있어서 지보패턴 선정시 전기비저항탐사 결과를 효과적으로 황용하기 위하여 전기비 저항 역산결과와 암반분류와의 상관관계를 도출해 내고자 하는 시도가 이루어지고 있다. 그러나 전기비저항탐사결과를 고려한 예상지보패턴과 실제로 시공된 지보패턴 결과를 비교한 연구는 찾아보기 힘들다. 본 연구에서는 실제 터널굴진 상태에서 막장관찰에 기초한 암반분류 및 지보패턴 선정과 시공 전 수행한 전기비저항 탐사자료를 비교함으로씨 전기비저항 탐사 결과가 어느 정도의 신뢰도로 이용될 수 있는가를 살펴보고자 한다. 전기비저항 자료와 암반분류의 정량적인 상관성을 얻기 위하여 암반분류값으로 RMR(Rock mass rating)을 기본으로, RCR(rock condition rating), N(Rock mass number), Q-system 등을 이용하였다. 전기비저항탐사는 공간적 해상도가 낮기 때문에 후처리 과정으로 크리깅 기법을 사용하여 해상도를 향상시키고자 하였다. 상관도 분석 결과, 2차원 전기비저항탐사결과는 정성적인 경향을 살펴보는데 적합한 것으로 나타났다 3차원 전기비저항탐사 결과와의 상관관계는 매우 높은 것으로 나타나 신뢰도 높은 암반분류에 적용 가능하리라 예상된다.

• 터널과지하공간
• /
• 제14권2호
• /
• pp.142-153
• /
• 2004

지층지형에 의한 암반 불균질성이 3차원 응력장에 미치는 영향을 고찰하기 위해서, 등방 직육면체모델, 평탄한 지층을 가진 직육면체모델, 오목한 지층을 가진 직육면체모델에 대해서 3차원 유한요소해석을 수행하였다. 해석결과로부터, 지반 내에 존재하는 지층의 형상은 암반 내 광역응력장에 큰 영향을 미치고 있음을 명확히 하였다. 현장계측결과로부터 광역응력장을 역해석하는 광역응력장 평가법에 지표면을 가진 균질모델과 지표면과 지층지형을 가진 불균질 모텔을 적용하고, 지층지형에 의한 암반 불균질성이 현장계측결과에 미치는 영향을 고찰하였다. 추가로, 지층지형 모텔을 고려한 광역응력장 평가법의 타당성에 대해서 검토하였다.

• 터널과지하공간
• /
• 제6권4호
• /
• pp.335-341
• /
• 1996

This fundamental study analyzes the relationship between rock thermal properties and psychrometric properties in underground space and has a ultimate goal to develope technologies for predicting major environmental variables. The study is divided into 2 subjects (1) developement of a basic model for predicting temperature and humidity, (2) analysis of the validity of the model through application to a local underground storage space for military supplies. The basic model is built for the network of tunnel-shaped underground spaces. The model takes into account rock thermal properties and changes in moisture content in the air due to condensation/evaporation on the rock surface. Using lumped-parameter analytical method, heat flux from or to the surrounding rock is calculated and then the psychrometric properties(air quantity, pressure, temperature, humidity) are estimated through network simulation. The model can be utilized regardless of the tunnel type. The study site is a local storage space built in rock, mainly granite gneiss and quartz-porphyry. It is a U-shaped tunnel, 593.5m long and 6x6.5m wide. Relative humidity inside has to be strictly controlled under 55% to avoid erosion of a certain types of supplies stored in 6 chambers with the capacity of 300~1.000 ton. The thermal conductivity varies between 2.734 and 2.779W/m$^{\circ}C$ and the thermal diffusivity is in the range of 1.119 and $1.152{\times}10^{-6}\;m^2/s$ the specific heat between 910 and $920\;J/kg^{\circ}C$. Relative errors of the predicted values of dry/wet temperature and relative humidity are 0.8~3.0%, 0~7.5% and 0~7.0%, respectively. Apparent errors associated with the rock surface temperature seems to be partly due to the intrinsic limitations in the infrared thermometer used in this study.

• 화약ㆍ발파
• /
• 제38권4호
• /
• pp.26-36
• /
• 2020

지하공간의 이용범위 확장 및 활용이 증가함에 따라 테러리스트들에 의한 지하 내부 폭발의 발생 가능성이 증가하고 있다. 본 연구에서는 심도 50m의 심도에 굴착된 원형 터널을 모델링한 후, 터널의 내부에 폭발하중을 가하였다. 폭발하중은 ATF(Bureau of Alcohol, Tobacco, and Firearms)에서 제시하는 6종류의 운반용 차량에 대한 최대 폭약량의 폭발하중을 산정하였다. 원형 터널 주변 지반은 국내 터널 설계에서 제시하는 지보패턴에 따른 3종류의 암반등급을 선정하였다. 비선형 동적해석을 수행하여 폭발하중과 지반 특성을 매개변수로 지표 변위를 분석하여 지상 구조물의 영향에 대해 평가하였다. 해석결과, 1등급암에 대해서는 지반의 융기에 대한 영향을 고려해야 하며, 2등급암과 3등급암은 부등침하에 대한 영향을 고려해야 한다. 특히, 3등급암은 40m 이내의 지상 구조물에 대해서는 정밀 분석이 요구된다. 또한 지표 변위는 탄성계수에 의한 영향이 주요인인 것으로 판단된다.

• Geomechanics and Engineering
• /
• 제20권4호
• /
• pp.287-297
• /
• 2020

This paper investigates the stability of a three-dimensional (3D) wedge under the pseudo-static action of an earthquake based on the nonlinear Barton-Bandis (B-B) failure criterion. The influences of the mechanical parameters of the discontinuity surface, the geometric parameters of the wedge and the pseudo-static parameters of the earthquake on the stability of the wedge are analyzed, as well as the sensitivity of these parameters. Moreover, a stereographic projection is used to evaluate the influence of pseudo-static direction on instability mode. The parametric analyses show that the stability coefficient and the instability mode of the wedge depend on the mechanical parameter of the rock mass, the geometric form of the wedge and the pseudo-static state of the earthquake. The friction angle of the rock φ_b, the roughness coefficient of the structure surface JRC and the two angles related to strikes of the joints θ₁ and θ₂ are sensitive to stability. Furthermore, the sensitivity of wedge height h, the compressive strength of the rock at the fracture surface JCS and the slope angle α to the stability are insignificant.

• 보존과학연구
• /
• 통권27호
• /
• pp.103-128
• /
• 2006

Rock properties of the five storied stone pagoda in the Mooryangsa temple are consist mainly in medium grained biotite granite with partly pegmatite veinlet. A part of the foundation stone is substituted in identical rock properties of the pagoda. The upper part of the pagoda is used purples and stone, gray shale and granodiorite. The most serious problem of the pagoda is structual instability from centered subsidence of the ground in northwestern direction remarkably. In southern view, the upper part of the pagoda also is slanted a little in right, it will need reinforcement by engineering method for structual stability of the stone pagoda. Weathering states of the stone pagoda are affected results of natural and artifical factors due to the surface-exfoliation, fine-fissure, crack, falling offs. On the rock surface of the pagoda, ferro-manganese hydroxide compounds are coated along the rainpathway. Also, bryophyte range concentration spreads raindrops face of roof rock properties, which areadd biological weathering effects. For the synthetic evaluation of the deterioration state, we make detailed surface weathering maps, it will be contribute to investigation for future conservation schemes.