• Tunnel and Underground Space
• /
• v.5 no.2
• /
• pp.114-122
• /
• 1995

The principle and applications of GPR(Ground Penetrating Radear) are familiar to engineering geologists and geophsicists as very attractive technique for continuous high resolution images of the subsurface. However, the main limitation of GPR is obviously related to presence of clayey or silty conductive soils, resulting in complete attenuation of radar signals. This difficulty gives hesitation for the exploration of the deeper targets for example detecting bedrock, particularly in Korean situation that most regions have conductive overburden. In order to prove usefulness of geological survey with GPR in that situation, the technique was tried to investigate depth of bedrock under thick conductive overburden and the other geolocgical informations for the constructionof foundation in the Dongbu apartment site, Kimhae. The reflection patterns on the processed GPR sections are well correlated with the geotechnical units-bedrock, alluvium, landfill unit and their internal layer-boundaries of boring data before GPR survey, except upper contact of bedrock. The isopach maps of the geotechnical units for the 3-D interpretations are made from GPR sections. The maps provided useful geological information that bedrock was distributed as plain and valley with 22~27m depth under alluvium unit (this depth is 5~8 m deeper than drill log) and sedimentary layers subsided and bended along growth fault with NNE strike/15$^{\circ}$SE dip in alluvium unit.

• Tunnel and Underground Space
• /
• v.18 no.5
• /
• pp.355-365
• /
• 2008

Displacement caused by tunneling is difficult to predict since it is affected by many factors such as ground condition, excavation method and supplementary method of reinforcement. In this study, horizontal inclinometer was employed to monitor ground settlements above a tunnel face before and after the excavation. Monitoring results were analyzed to predict the preceding displacement and settlement of the surface structures. The result of the analysis can be used to establish a proper counter measure which keeps the serviceability of the surface structures. Based on the analysis of the monitoring result, ground properties of the site were deduced and the influence of the tunnel excavation on the settlement of the foundation above the tunnel is analyzed.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.5
• /
• pp.180-188
• /
• 2010

This study was carried out to evaluate the analysis of environmental change (forest resources and soil water conservation by land types) after planting for prevention of between 2003 and 2006 from the stone hazarding areas in Guizhou province, China. Mean diameter growth of the trees was highest for Melia azedarach, followed by Robinia pseudoacacia, Lonicera fulvotomentosa, Choerospondias axillaris, Cupressus duclouxiana, and Eucommia uimoides Oliv. Mean height growth of the trees was greatest for R. pseudoacacia, followed by Ilex kudincha, M. azedarach, C. duclouxiana, C. axillaris, E. uimoides Oliv, Zanthoxylum bungeanum, and L. fulvotomentosa. Tree biomass was greater at the afforestation sites by 1.22-1.71 ton/ha compared to that of severely eroded mountain areas. The capacities of soil water conservation by land types were 2,790 ton/ha at latent rock desertification farmland, 2,655 ton/ha at rock desertification farmland, 1,680 ton/ha at dolomite sandstone hilly country, 1,650 ton/ha at halfstony hilly country, and 1,590 ton/ha at karst physiognomy site. Soil erosion was estimated to be 1,285 ton/$km^2$ which had been 2,178 ton/$km^2$ before afforestation. Also, we should be continuative manage after planting for prevention of the stone hazarding areas in Guizhou province, China.

• Tunnel and Underground Space
• /
• v.18 no.2
• /
• pp.91-97
• /
• 2008

In this paper, in-situ technique for measuring hydraulic conductivity of Excavation Disturbed Zone (EDZ) in a direct way and its application to an Underground Research Laboratory (URL) site were introduced. It was understood that both the EDZ oriented test equipment as a hardware and analysis/evaluation technique as a software should be integrated for upgrading a quality of estimated EDZ hydraulic conductivity. The well-estimated EDZ hydraulic conductivity is expected to enhance a reliability of stability evaluation for caverns under groundwater table and design of a waterproof or drainage system as well as a grout system.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.19 no.1
• /
• pp.1-7
• /
• 2021

The pH dependence of sorption distribution coefficient (Kd) of Np(IV) on MX-80 in Ca-Na-Cl type solution with the ionic strength of 0.3 M, which was similar to one of the reference groundwaters in crystalline rock, was experimentally investigated under the reducing conditions. The overall trend of Kd on MX-80 was independent of pH at 5 ≤ pH ≤ 10 but increased as pH increased at pH ≤ 5. The 2-site protolysis non-electrostatic surface complexation and cation exchange model was applied to the experimentally measured pH dependence of Kd and the optimized surface complexation constants of Np(IV) sorption on MX-80 were estimated. The values of surface complexation constants in this work agreed relatively well with those in the Na-Ca-Cl solution previously evaluated, suggesting that compared to Na+, the competition of Ca2+ with Np(IV) for surface complexation on MX-80 was not much strong in Ca-Na-Cl solution. The sorption model well predicted the pH dependence of Kd values but slightly overestimated the sorption at the low pH region.

• Geomechanics and Engineering
• /
• v.34 no.5
• /
• pp.547-559
• /
• 2023

We evaluated the applicability of machine learning techniques and the Kuz-Ram model for predicting the mean fragmentation size in open-pit mines. The characteristics of the in-situ rock considered here were uniaxial compressive strength, tensile strength, rock factor, and mean in-situ block size. Seventy field datasets that included these characteristics were collected to predict the mean fragmentation size. Deep neural network, support vector machine, and extreme gradient boosting (XGBoost) models were trained using the data. The performance was evaluated using the root mean squared error (RMSE) and the coefficient of determination (r²). The XGBoost model had the smallest RMSE and the highest r² value compared with the other models. Additionally, when analyzing the error rate between the measured and predicted values, XGBoost had the lowest error rate. When the Kuz-Ram model was applied, low accuracy was observed owing to the differences in the characteristics of data used for model development. Consequently, the proposed XGBoost model predicted the mean fragmentation size more accurately than other models. If its performance is improved by securing sufficient data in the future, it will be useful for improving the blasting efficiency at the target site.

• Computers and Concrete
• /
• v.33 no.5
• /
• pp.573-594
• /
• 2024

This article presents a research study, with both laboratory and field tests, of a deep foundation in a markedly anisotropic medium. Particularly it has focused on the evaluation of the behavior of a pile, one meter in diameter, embedded in a rocky environment with difficult conditions, in the Flysch of the Spanish city of San Sebastián. To carry out the research, the site of a bridge over the Urumea River was chosen, which was supported by pre-excavated reinforced concrete piles. 4 borings were carried out, by the rotation and washing method, with continuous sampling and combined with flexible dilatometer tests. In the field, an Osterberg load test (O-cell) was performed, while in the laboratory, determinations of natural moisture, natural unit weight, uniaxial compressive strength (UCS), point load strength (PLS), compressive wave propagation velocity (V_c) and also triaxial and direct shear tests were carried out. The research results indicate the following: a) the empirical functions that correlate the UCS with the PLS are not always linear; b) for the studied Flysch it is possible to obtain empirical functions that correlate the UCS with the PLS and with the V_c; c) the bearing capacity of the studied Flysch is much greater than if it is evaluated by different load capacity theories; d) it is possible to propose an empirical function that allows evaluating the mobilized shear strength (τ_m), as a function of the UCS and the displacement relative of the pile (δ_r).

• Journal of the Earthquake Engineering Society of Korea
• /
• v.14 no.4
• /
• pp.1-15
• /
• 2010

In this study, the reduction factor of the code-defined site coefficient due to the embedment of a foundation was estimated for the seismic analysis of a building built on a soft soil site. This was done by utilizing the in-house finite element software P3DASS, which has the capability of pseudo 3D seismic analysis with nonlinear soil layers. A 30m thick soft soil site laid on the rock was assumed to be homogeneous, elastic, viscous and isotropic, and equivalent circular rigid foundations with radii of 10-70m were considered to be embedded at 0, 10, 20 and 30m in the soil layer. Seismic analyses were performed with 7 bedrock earthquake records deconvoluted from the outcrop records of which the effective ground acceleration was scaled to 0.1g. The study results showed that the site coefficients are gradually reduced except in the case of a small foundation embedded deeply in the weak soil layer, and it was estimated that the deviation of the site coefficients due to the foundation size was not significant. The standard reduction factor due to the foundation embedment were calculated adding the standard deviation to the average of 5 reduction factors calculated for 5 different foundation radii. Standard reduction factors for the site amplification factor were proposed for the practical amplification and the codes of KBC, etc., in accordance with the average shear wave velocity of the site, and the site class.

• Journal of Environmental Science International
• /
• v.17 no.8
• /
• pp.891-898
• /
• 2008

This study was conducted to develop the effects of site environmental factors on estimation of site index function for Chamaecyparis obtusa Endlicher stands. We derived nonlinear growth equation and the draw site index curves by applying this estimated equation. This study with Chapman-Richards function showed significant P-value which was less then 0.0001 and $R^2$ value 0.5947. This study was conducted to develop the feasible site index equation of Chamaecyparis obtusa Endlicher. For the table, the data of 82 sample areas that were thought to be without errors among the data of Chamaecyparis obtusa Endlicher sample area located on the value-oriented forest location chart were used and estimated. After analyzing the quantification method I based on 13 environmental factors to develop the score table for the site-index estimation of Chamaecyparis obtusa Endlicher, $R^2$ value of the model was 0.7555. It has been analyzed that the scope value of Soil moisture in horizon A was 7.5045, that of total soil depth was 6.3896, that of topography was 5.3471, that of slope was 4.7000 and that of aspect was 3.2038. After analyzing the partial correlation to examine the factors that affected most the site-index of Chamaecyparis obtusa Endlicher, it has been noted that the partial correlation of climatic zone was 0.4987, which was highest, and it was followed by Soil moisture in horizon A (0.4592), slope (0.4537), topography (0.3299) and total soil depth (0.1035). As a result of conducting the significance test for partial correlation, it has been found that topography, climatic zone, parent rock, slope, altitude, aspect, Soil moisture in horizon A, soil hardness in horizon A and total soil depth were recognized significant with 1% of significance level and sedimentary type and soil texture in horizon A were recognized significant with 5% of significance level.

• Tunnel and Underground Space
• /
• v.10 no.4
• /
• pp.506-515
• /
• 2000

A lot of underground construction projects have been conducted by economical, social and military purposes in Korea for the last three decades. As a result, magnificent amount of data were obtained from geological site investigations, laboratory and field tests, design and field monitoring. But up to now, these valuable informations were neither systematically stored nor utilized efficiently resulting in a great loss of time and money. In this study, a database system named GeoINFO was developed using Microsoft Access 97 for management of informations which can be obtained from underground construction. The developed database system is especially designed to cover three major types of underground facilities-tunnels, underground storages and rock slopes and has multi-layered tree structures for data input. The system also has a unique indexing system for efficient data search using Visual Basic code.