• Journal of the Korean Society of Safety
• /
• v.25 no.2
• /
• pp.78-83
• /
• 2010

An installation of automated speed enforcement system(ASES) was known for traffic safety and accident preventive effects that traffic characteristics transmute by speed distribution stabilizing. This study is verified the variations of average speed, 85% speed, speed distribution and dispersion as traffic characteristics depend on enforcement system influences in the road. We tested selected 5 areas. By and large, it has a little differences depend on road geometric structure and traffic environment but that is not too much. After all, after automated speed enforcement system installed in all of test areas, average speed, 85% accumulated speed, speed distribution and dispersion characteristics were declined and equalized. The speed dispersion was smaller than before installed the ASES. The speed dispersion value of each case that is the limited speed has been 70Km/h, 80Km/h at flat and straight, 80Km/h at downhill and straight or downhill and left-curved area was 77.3%, 65.2%, 68.7% and 54.1%. Each of the data was declined. We could analyze that average speed distributed depletion factor was declined rapidly by 66.3% in test area.

• International Journal of Highway Engineering
• /
• v.14 no.6
• /
• pp.103-110
• /
• 2012

PURPOSES : In Korea, over 70 percent of the land consists of mountainous and rolling area. Thus, tunnels continue its upward trend as road network are extended. In these circumstances, the importance of tunnel has been increased nowadays and then its safety investigation and research should be performed. This study is focus on confirming and improving the safety of tunnel. On tunnel hood, sunglare effect can irritate driver's behavior instantly and this can result in incident. METHODS : The study of this phenomenon is rarely conducted in domestic and foreign papers, so there is no proper measure for this. This study analyzes the driving environment of the effect of sunglare effect on tunnel hood. RESULTS : Traffic accidents stem from complex set of factors. This study build the Traffic Accident Prediction Models to find out the effect of sunglare effect on tunnel's hood. The independent variables are traffic volume, geometric design of road, length of tunnel and road side environment. Using these variables, this model estimates accident frequency on tunnel hood by Poisson regression model and Negative binomial regression model. Although Poisson regression model have more proper goodness of fit than Negative binomial regression model, Poisson regression model has overdipersion problem. So the Negative binomial regression model is used in this analysis. CONCLUSIONS : Consequently, the model shows that sunglare effect can play a role in driving safety on tunnel hood. As a result, the information of sunglare effect should be noticed ahead of tunnel hood so this can prevent drivers from being in hazard situation.

• The Journal of the Korea Contents Association
• /
• v.21 no.12
• /
• pp.190-201
• /
• 2021

The variable message sign (VMS) is equipment to improve the efficiency of traffic flow and safety of travel by providing real-time information to road users on traffic, road, weather situation, and traffic control due to construction. The information messages of the letter-based VMS taking up most of the VMS on the general national highways consist of section, travel time in sections, and road control situation. This study devised an improvement plan centered on road users, not road managers-centered existing message-based VMS through an analysis of road users' preference targeting the letter-based VMS operated in the general national highways in the Seoul Metropolitan Area. By presenting the measure for system improvement through which information on unexpected situations that road users prefer the most can be quickly and efficiently provided, this study aims to improve the efficiency of road user-centered VMS traffic information.

• Transportation Technology and Policy
• /
• v.12 no.1
• /
• pp.51-56
• /
• 2015

• International Journal of Highway Engineering
• /
• v.10 no.3
• /
• pp.109-118
• /
• 2008

This study analyzes the change of stability of embankment due to the construction of embankment combined used road with two different construction phases. The stabilities have been checked both in the phase of earth banking for a road construction and in the phase of the application of the traffic roads(DB-24). In both cases the factor of safety has been found higher than 1.3 which is the general criterion of the safety of an embankment. The results indicate that the safety of an embankment due to the construction of embankment combined use road is assured, and thus, it is thought that the construction of embankment combined use road can be considered for cutting down on expenses of construction sites for a road construction. However, the pre-examination of stability due to the construction should be carried out because it decreases the factor of safety of an embankment. From this study, it has been found that the factor of safety was dropped most when the water level rose in the transient flow. The result indicates that the stability analysis of a river embankment where the water level changes frequently should be carried out in the condition of transient flow. It is recommended that the inner side of an embankment should have a slope of 1:2 which is identical with the slope of the existing embankment. In addition, the factor of safety also can be decreased due to the traffic loads, and therefore, the effect should also be considered after the construction of embankment combined used road limiting the traffic loads.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5D
• /
• pp.443-451
• /
• 2010

This paper proposes the methodology about advisory safety speed based on real-time vehicular data collected from highway. The proposed model is useful information to drivers by appling seamless wireless communication and being collected from ECU(Engine Control Unit) equipment in every vehicle. Furthermore, this model also permits the use of realtime sensing data like as adverse weather and road-surface data. Here, the advisory safety speed is defined "the safety speed for drivers considering the time-dependent traffic condition and road-surface state parameter at uniform section", and the advisory safety speed model is developed by considering the parameters: inter-vehicles safe stopping distance, statistical vehicle speed, and real-time road-surface data. This model is evaluated by using the simulation technique for exploring the relationships between advisory safety speed and the dependent parameters like as traffic parameters(smooth condition and traffic jam), incident parameters(no-accident and accident) and road-surface parameters(dry, wet, snow). A simulation's results based on 12 scenarios show significant relationships and trends between 3 parameters and advisory safety speed. This model suggests that the advisory safety speed has more higher than average travel speed and is changeable by changing real-time incident states and road-surface states. The purpose of the research is to prove the new safety related services which are applicable in SMART Highway as traffic and IT convergence technology.

• Journal of the Korean Society of Safety
• /
• v.32 no.5
• /
• pp.129-134
• /
• 2017

This study aims to develop the traffic accident models by circular intersection type using count data model. The number of accident, the number of fatal and injured persons(FSI), and EPDO are calculated from the traffic accident data of TAAS. The circular intersection accident models are developed through Poisson and negative binomial regression analysis. The main results of this study are as follows. First, the null hypotheses that there are differences in the number of traffic accidents, FSI and EPDO by type of circular intersections are rejected. Second, the scale of intersection(median, large), number of approach road, mean width and length of exit road, area of the circulating roadway and central island are selected as factors influencing the number of traffic accidents, FSI and EPDO in rotary. Third, the scale of intersection(median), guide signs(limited speed, direction, roundabout), number of approach road, entry angle, area of the intersection and central island are adopted as factors influencing the number of traffic accidents, FSI and EPDO in roundabout. Finally, transferring from rotary to roundabout could be expected to make the accident decrease.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2005.11a
• /
• pp.138-143
• /
• 2005

In order to reduce traffic accident, the interaction between drivers and roads should be studied in drivers' behaviour standpoints, and then this must be applied to the establishment of the road design standard. The K-ROADS(KICT-Road Analysis Driving Simulator) was developed to analyze and evaluate the road safety at the project HuRoSAS(Human & Road Safety Analysis System), since 2003. This has two distinct functions. One is the visual system which has 360 degree F.O.V. to reduce a dead angle on black spots as at-grade intersection. The other is the motion system which reproduce high frequency vibration made in irregular road surface and vehicle's motion. The K-ROADS has been used the study on the effect of alternatives of speed hump, and the study on the interior wall design of long tunnel to safety standpoints.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.9 s.351
• /
• pp.128-134
• /
• 2006

Traffic information protocol in DMB is very different from existing analog broadcasting and wireless communication network. In this paper, we examined whether traffic information protocol of Europe Broadcasting Union(TPEG) is applicable to domestic DMB. Also, we proposed a division of classification on kinds of franc information, and related data that it is required to transmit traffic information of TPEG form. We composed of experiment equipment and studied whether is expressed traffic informations as like accident, event, traffic condition and CCTV image on car navigation system. The results obtained it can be given expression to phrases from TPEG streaming data and to link with electronics map by decoding TPEG straming data. Also it can be expressed CCTV and graphic image which is composed of TPEG form.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.1
• /
• pp.11-20
• /
• 2011

This study aimed to devise the method to construct safe and convenient bicycle road by considering the peripheral environmental factor related to using bicycle. Analyzing the existing design of bicycle road and construction case, this study established the method to design bicycle road that reflects site condition and presented the optimal design method for each type of bicycle road to construct safe and convenient bicycle road by analyzing the type of traffic accident for each type of bicycle road, surveying present situation and local survey. It was found that the optimum design of bicycle road for specification, width, curve radius, ascending slope, etc in consideration of peripheral environment and separating traffic between users of traffic means should be done by installing safety sign, safe facilities and separation facilities to design safe bicycle road. Further, the minimum traffic space of bicycle users and connection between bicycle roads should be ensured to design safe bicycle road. It is judged that information related to safety and convenience of bicycle road such as slope, route information, location of convenience facilities, information to the public traffic should be provided so as to activate the users of bicycle.