• 한국지반공학회논문집
• /
• 제30권12호
• /
• pp.27-40
• /
• 2014

본 논문은 도로구조물 및 시설물들에 대한 발파진동 허용기준들을 도출하고 그 결과를 제시하고자 한 것이다. 본 연구를 위해서 우선 현재 국내 외에서 사용되는 다양한 구조물들에 대한 발파진동 허용기준들에 대해서 조사하였으며, 이를 통해 국내에서 적용되는 발파진동 허용기준들에 관련되는 문제점을 분석하고 이를 해소하기 위한 방안을 제시하였다. 더 나아가 본 연구에서는 국내 외에서 사용되는 다양한 발파진동 허용기준들을 상호 비교 및 분석한 후 교량 및 터널 등의 도로구조물 및 시설물들에 대한 발파진동 허용기준으로서 국내에서 사용할 수 있는 기준들을 구조물별로 제시하였다. 제시된 기준들의 실무적용을 위한 타당성 검증을 위해서 현장에서 계측되고 관측된 발파진동 유발 구조물 피해사례들을 수집한 후 제시된 기준들과 상호 비교분석하였다. 뿐만 아니라 제시된 기준들은 이론적 접근방법 및 수치해석적 방법을 통한 결과들과도 상호 비교분석하였다. 비교분석결과 제시된 도로구조물 및 시설물별 발파진동 허용기준들은 실무적용을 함에 있어서 타당성이 있는 것으로 나타났다. 이와 같은 결과를 통해서 본 연구에서 제시된 기준들은 향후 국내 외 도로구조물 및 시설물들의 발파진동에 따른 피해유무를 판단하기 위한 기준으로서 실무에서 유용하게 활용될 수 있을 것으로 기대된다.

• 복합신소재구조학회 논문집
• /
• 제6권3호
• /
• pp.62-68
• /
• 2015

As a preparation of a design standard regarding road facilities, such as cantilever columns for traffic lights, street lights on highways is proposed. Currently these minor structures are designed based on guidelines which are mixed with multiple old foreign specifications without any criteria in terms of safety and economy, which could lead irregular safeties and the loss of national properties. In the considered two cases for effective projected area, it is found that following efficient way of design without critical analyses could make significant errors and miscalculations. Therefore, a fundamental research on the minor structures is urgently needed.

• 복합신소재구조학회지
• /
• 제1권3호
• /
• pp.43-45
• /
• 2010

• 한국산림과학회지
• /
• 제100권1호
• /
• pp.25-33
• /
• 2011

본 연구는 임도 설계자가 보다 간편하고 정확하게 임도 배수시설을 설계하는 데에 기여할 수 있는 임도 배수시설 규격 산정 프로그램을 개발하는 데에 목적이 있다. 본 프로그램의 특징은 임도설계자가 현장 측량을 하기에 앞서 실내에서 임도의 예측을 실시할 때 현장 측량을 통해 취득해야 하는 데이터가 없이도 간편하게 강우강도를 이용하여 유역 내 유출량을 산출할 수 있도록 하였다. 그리고 이를 통해 배수구조물의 최소 규격을 산출해 줌으로써 과도한 설계를 억제할 수 있게 하였다. 또한 임도가 시설되는 지역의 각 유역별 유출량을 산출함으로써 배수구조물의 적절한 배치에 기여코자 하였다. 특히 배수관의 설치에 따른 전과정을 보고서로 작성하여 파일 및 출력물 형태로 제공함으로써 합리적인 설계과정을 보여줄 뿐만 아니라 오류 발생시 즉각적인 수정이 가능케 함으로써 임도 설계기술의 상향평준화에 기여할 수 있을 것으로 생각된다.

• 한국안전학회지
• /
• 제30권6호
• /
• pp.122-131
• /
• 2015

Recently, starting with the deep underground road construction plan in Seobu Expressway, Korea, there area many studies on deep underground roads to be newly built. However, there is an extreme lack of safety standards, which does not consider traffic conditions and road driving characteristics. Therefore, this study reviewed safety elements to reflect in the deep underground road planning by analyzing driving stability of longitudinal tunnels with road environments, which resemble deep underground roads. For comprehensive analysis, the characteristics and causes of the accidents that have occurred in seven longitudinal tunnels with a length of 2km or over in Gangwon area, were collected. Specifically, geometric structures and facilities of each tunnel were investigated. Also, the present state of facility installation and the changes in driving speed of vehicles passing through each tunnel were observed to analyze the causes for the traffic accidents in each tunnel and accident reduction alternatives. It was revealed that the most frequent accidents in the tunnels resulted from the changes of traffic flow due to the abrupt speed reduction of forward vehicles, or the failure in speed control of following vehicles during the traffic congestion situation. Moreover, installing facilities such as plane and longitudinal curves, median strips and marginal strips seem to induce consistent driving speed. These results mean that for accident prevention, speed management must be preceded and there is a need to develop and introduce safety facilities actively to control the driving flow of forward and following vehicles.

• 한국환경복원기술학회지
• /
• 제23권4호
• /
• pp.97-110
• /
• 2020

This study conducted observations at 72 traffic lights and road signs in Sejong-si, Korea from March to June 2019 in order to analyze nest-site, nest-site characteristics and feeding behavior in Tree sparrow (Passeer montanus) in urban. Feeding behavior during breeding season in 2019 was investigated at 10 Town representing traffic facilities installed on the road located in the center of the city and 10 Riverside Geumgang river's riverside road. We fitted both general linear model and regression model to our field data and estimated the spatial variation of initial date of the first feeding (i.e., being date of breeding) and the total number of caterpillar fed by parents per hour. Our results showed that the frequency of nest building on artificial structures, such as traffic lights, was about 26% higher and about 8 days earlier in the riverside. In particular, the first feeding was significantly faster when the nearest distance between nest to green field as foraging site was shorter whereas there was no significant effect of the number of nest within 50 meters on the first feeding. Number of caterpillars fed by parents was higher in the Riverside than in the Urban, and especially the number in the second brood was sharply decreased in the Urban. As we estimated average amount of caterpillars per hour to 446 traffic safety facilities in Sejong-si, it was estimated that Tree sparrows fed 18,742.8 caterpillars per hour during the breeding season. In this study, we showed that characteristics of nests built in artificial structures and feeding behavior in order to analyze effects of environmental condition in urban on life-history traits during the breeding season. Finally, we discussed the conservation of birds in urban and pest control effects.

• 한국컴퓨터정보학회논문지
• /
• 제29권1호
• /
• pp.195-209
• /
• 2024

1990년대 개발되어 현재의 모습을 갖춘 교통신호제어기는 최근 도로 이용자의 교통안전 향상 및 자율협력주행 등을 목적으로 설치되는 다양한 장치들에 대한 전원공급 문제와 다양한 통신방식, 계층화된 블랙박스 구조 등으로 인해 유연성과 확장성에 한계를 가지고 있다. 이에 본 논문에서는 이더넷전원장치(PoE : Power over Ethernet) 기술을 통해 직류(DC) 전원 사용과 전원공급 문제를 해결하고, 메시지 브로커(Message Broker) 기술을 통해 중앙화된 데이터 기반 제어를 함으로써 빠르게 변화하는 미래 교통환경에 대응이 가능한 교통안전시설 통합관제시스템을 설계하였다. 또한 시계열 데이터를 기반으로 동작하는 교통안전시설 장치를 위한 데이터 기반 실시간 제어 방안을 구현하고 검증하였다.

• 한국도로학회논문집
• /
• 제19권3호
• /
• pp.19-30
• /
• 2017

PURPOSES : This study proposes the road asset valuation approach using alternative depreciation methods. It has become necessary to have asset management system according to the adoption of accrual basis accounting for governmental financial reporting and the amendment of the road act. Therefore, it is very important to analyze the effect of depreciation methods on road asset value as a basic research for road asset management system. METHODS : The Ministry of Strategy and Finance (MOSF) has mainly performed road asset valuation based on Write down Replacement Cost and Straight Line depreciation method. This study suggests some appropriate asset valuation methods for road assets through case analysis using three depreciation methods: Consumption-based depreciation method, Condition-based depreciation method, and Straight Line depreciation method. A road asset valuation data of national highway route 1 (year 2014) is used to analyze the effect of three depreciation methods on the road asset value. Road assets include land and structures (pavement, bridge, and tunnel). This study mainly focuses on structures such as bridges and tunnels, because according to governmental accounting standards, land and road pavement assets do not depreciate. RESULTS : The main results of this study are as follows. Firstly, overall asset value of national highway route 1 was estimated at 6.97 trillion KRW when MOSF's method (straight-line depreciation method) is applied. Secondly, asset value was estimated at 4.85 trillion KRW on application of consumption-based depreciation method. Thirdly, asset value was estimated at 4.37 trillion KRW when condition-based depreciation method is applied. Therefore, either consumption-based or condition-based depreciation methods would be more appropriate than straight-line depreciation method if we can use the condition data of road assets including land that are available in real time. CONCLUSIONS : Since road assets such as pavements, bridges, and tunnels have various patterns of deterioration and condition monitoring period, it is necessary to consider a specific valuation method according to the condition of each road asset. Firstly, even though road pavements do not depreciate, asset valuation through condition-based depreciation method would be more appropriate when requirements for application of non-depreciation approach are not satisfied. Since bridge and tunnel facilities show various patterns of deterioration and condition monitoring period by type and condition level, consumption-based depreciation method based on deterioration model would be appropriate. Therefore, it is necessary to have a reasonable asset management system to apply condition-based depreciation method and a periodic condition investigation to manage road assets well.

• 한국산림과학회지
• /
• 제112권4호
• /
• pp.451-458
• /
• 2023

산불이 대형화됨에 따라 산불 예방 및 진화를 위해 임도시설의 중요성이 증가하고 있다. 산불 발생 시 임도가 제 역할을 수행하기 위해서는 적정한 노선 선정과 함께 구조적인 안정성을 확보해야 한다. 그동안의 연구는 산불 발생에 따른 임도의 효과와 노선 배치에 치중되어 있으며, 임도의 안전성 확보를 위한 연구는 수행되지 않은 실정이다. 따라서, 본 연구는 최근 3년간 초대형 산불 발생지 내의 임도 콘크리트 시설물을 대상으로 콘크리트 비파괴검사기법 중 하나인 반발경도법을 이용하여 산불 여부에 따라 그 강도를 비교하였다. 연구 결과, 산불 피해 콘크리트 시설물(15.4 MPa)은 미피해 콘크리트 시설물(18.0 MPa)에 비해 낮은 강도를 나타냈으며(p<0.001), 그 경향은 모든 대상 시설물에서 동일하게 나타났다. 따라서, 임도 시설의 강도 저하로 인한 임도의 2차 피해를 방지하기 위해 임도 시설물의 안전진단 기준이 마련되어야 할 것이다. 또한, 본 연구 결과에 대한 지속적인 모니터링과 실내 실험을 동반한 후속 연구가 진행되어 임도의 안정성을 제고해야 하며, 이를 통해 산불 예방과 진화를 위한 더 나은 전략을 마련할 수 있을 것이라 기대한다.

• 한국도로학회논문집
• /
• 제19권4호
• /
• pp.27-36
• /
• 2017

PURPOSES : The purpose of this study is to perform a reliability analysis of the proposed wind load combination which governs the design of support structures of subsidiary road facilities, and to evaluate whether the target reliability of the design is satisfied. METHODS : The statistical estimation method is applied and the design period of the support structure is used to obtain the statistical property of the wind load. In addition, the statistical properties of the strength of support structures are obtained from a literature review and simulation study. Actual support structures are designed by the proposed load combination and are used as the examples to examine if the target reliability is obtained. RESULTS : The result of the reliability analysis performed by using the statistical properties of load and resistance for the support structure in this study indicates that the proposed wind load combination satisfied the target reliability index of the design. Also, the convenience of the design is achieved by adopting the same design wind velocity given in the bridge design code by applying the wind velocity ratio defined for the design period of the support structure. CONCLUSIONS : It is presented that the design using the wind load combination proposed in this study achieved the target reliability index and the design wind load for different design periods can be conveniently defined by applying the velocity ratio proposed in this study.