• Journal of Food Hygiene and Safety
• /
• v.23 no.4
• /
• pp.291-296
• /
• 2008

The study was undertaken to provide information on the efficacy of sanitizers against bacteria with and without organic road dried on to food contact surfaces using the surface test method which EU and USA are currently implementing as one of their official test methods. Escherochia coli ATCC 10536 or Staphylococcus aureus ATCC 6538 was inoculated on to food contact surfaces, such as stainless steel, polypropylene, and silicon, which was then treated with benzalkonium chloride, sodium hypochlorite, or ethanol as a sanitizer for 5minutes at $20^{\circ}C$. Results indicated that the type of surface had little affected the efficacy of various sanitizers. In addition, 200 ppm of benzalkonium chloride or 200 ppm of sodium hypochlorite showed no definite reduction of bacterial populations in the present of organic load, while 40% ethanol showed reduction to $4\;cfu\;\log_{10}$/carrier or more in viable count in the organic load.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.27-31
• /
• 2006

GNSS Services and Applications are today in permanent evolution in all the market sectors. This evolution comprises: ${\bullet}$ New constellations and systems, being GALILEO probably the most relevant example, but not the only one, as other regions of the world also dwell into developing their own elements (e.g. the Chinese Beidou system). ${\bullet}$ Modernisation of existing systems, as is the case of GPS and GLONASS ${\bullet}$ New Augmentation services, WAAS, EGNOS, MSAS, GRAS, GAGAN, and many initiatives from other regions of the world ${\bullet}$ Safety of Life services based on the provision of integrity and reliability of the navigation solutions through SBAS and GBAS systems, for aeronautical or maritime applications ${\bullet}$ New Professional applications, based on the unprecedented accuracies and integrity of the positioning and timing solutions of the new navigation systems with examples in science (geodesy, geophysics), Civil engineering (surveying, construction works), Transportation (fleet management, road tolling) and many others. ${\bullet}$ New Mass-market applications based on cheap and simple GNSS receivers providing accurate (meterlevel) solutions for daily personal navigation and information needs. Being on top of this evolving market requires an active participation on the key elements that drive the GNSS development. Early access to the new GNSS signals and services and appropriate testing facilities are critical to be able to reach a good market position in time before the next evolution, and this is usually accessible only to the large system developers as the US, Europe or Japan. Jumping into this league of GNSS developers requires a large investment and a significant development of technology, which may not be at range for all regions of the world. Bearing in mind this situation, MAGIC appears as a concept initiated by a small region within Europe with the purpose of fostering and supporting the development of advanced applications for the new services that can be enabled by the advent of SBAS systems and GALILEO. MAGIC is a low cost platform based on the application of technology developed within the EGNOS project (the SBAS system in Europe), which encompasses the capacity of providing real time EGNOS and, in the near future, GALILEO-like integrity services. MAGIC is designed to be a testing platform for safety of life and liability critical applications, as well as a provider of operational services for the transport or professional sectors in its region of application. This paper will present in detail the MAGIC concept, the status of development of the system within the Madrid region in Spain, the results of the first on-field demonstrations and the immediate plans for deployment and expansion into a complete SBAS+GALILEO regional augmentation system.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6D
• /
• pp.859-869
• /
• 2008

These days, almost every industry's production line has become automatic and this phenomenon brought a lot of benefits such as increase in productivity and economical effect, assurance in industrial safety, better quality and compatibility. However, unlike industrial production line, in construction industry, automation has number of barriers like uncertainty incidents and intellectual judgment to make ability to make solution out of it. Therefore construction industry is still demanding use of construction machine through labor. Due to this matter operational labor in construction industry is aging and fading. To solve these problem, in developed nations like Europe, US or Japan are keep researching for the automation in construction and road pavement, strengthening and some other simple operations have been worked through automation but in civil engineering site, automation research is still low despite of its importance in constructional site. For automating civil engineering operation, effective operational plan have to be set by analyzing ground information acquainted. If skillful worker apply heuristics, trial & error can be reduced with increased safety and the effective work plan can be established. Hence, this research will introduce Intellectual Task Planning System for Intelligent Excavating System's effective work plan and heuristics applied in each steps.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.1
• /
• pp.55-69
• /
• 2017

Recently, the IoT (Internet of Things) environment is being developed rapidly through network which is linked to intellectual objects. Through the IoT, it is possible for human to intercommunicate with objects and objects to objects. Also, the IoT provides artificial intelligent service mixed with knowledge of situational awareness. One of the industries based on the IoT is a car industry. Nowadays, a self-driving vehicle which is not only fuel-efficient, smooth for traffic, but also puts top priority on eventual safety for humans became the most important conversation topic. Since several years ago, a research on the recognition of the surrounding environment for self-driving vehicles using sensors, lidar, camera, and radar techniques has been progressed actively. Currently, based on the WAVE (Wireless Access in Vehicular Environment), the research is being boosted by forming networking between vehicles, vehicle and infrastructures. In this paper, a research on the recognition of a traffic signs on highway was processed as a part of the awareness of the surrounding environment for self-driving vehicles. Through the traffic signs which have features of fixed standard and installation location, we provided a learning theory and a corresponding results of experiment about the way that a vehicle is aware of traffic signs and additional informations on it.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.1
• /
• pp.92-100
• /
• 2008

The existing transportation systems is emerged as a major obstacle to solve the problems such as a traffic jam and the increasing cost for a distribution and a traffic safety. In hun, ITS targeting intellectual vehicles and transportation infrastructure like road and signals is getting more important and the standards of ITS wireless communication is also getting attention. New traffic control strategies are being developed to utilize real-time traffic information collected by detection method using ITS wireless technology. Especially, DSRC system is being expanded wit ETCS and the use of OBU is spreading. These infrastructures will have much influence on ITS industry and a profound study on the method of utilizing a present infrastructure is going on in various fields. The optimum traffic signal control system using quality real-time information through these infrastructure is under development and so is WISDOM. Accordingly, this paper proposes communication protocol utilizing DSRC to collect real-time traffic information in WISDOM.

• Journal of the Society of Disaster Information
• /
• v.13 no.1
• /
• pp.1-5
• /
• 2017

301 cases of chemical accidents occurred during the recent three years('13~15) recording about 100cases on average in Korea.. Chemical accidents has brought casualties and negative impact on the environment. The chemical accident by transporting vehicles during recent 3 years records 21 on average & takes about 21% of the whole chemical accident. Systematic investigation on chemical accident was needed by corresponding authorities since the transport accident has occurred on the road, all over the nation. For the systematic investigation on the accident scene by the corresponding authorities, the cooperation of transport companies and transport contractor is highly necessary. The investigation of such accident scene was examined and analyzed in this study. Through this study, the results can be basis to analyzed the cause of chemical accident by transporting vehicles and to prepare procedures for on-site investigation and handling systematically.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.5
• /
• pp.539-550
• /
• 2014

High resolution satellite images have to be oriented and geometrically processed from GCPs(Ground Control Points) to generate precise DEMs(Digital Elevation Models) and topographic maps. In Korea, thousands of national UCPS(Unified Control Points) are established and distributed all over the country by the Korean NGII(National Geographic Information Institute). For that reason, UCPs can be easily searched and downloaded by the national-control-point-record-issues system. Following the study, we suggested the sky-view and road-view from web-portals for searching and identifying UCPs on the images. To evaluate the usefulness of UCPs in RPCs(rational polynomial coefficients) adjustment of the high resolution satellite images, the one UCP, which of using simple the control point, has been applied to adjust the vendor-provided RPCs of the KOMPSAT-3 images. As a result, the positioning error of corrected RPCs was approximately one pixel and one meter. From this experiment, we conclude that the UCPs will be able to replace the survey GCPs for mapping with the satellite images or aerial images.

• Journal of Korean Society of Transportation
• /
• v.22 no.4 s.75
• /
• pp.31-42
• /
• 2004

This study develops Accident Modification Factors (AMF) of countermeasures with Baysian method which are newly proposed for reducing Roadway-Rail grade crossing accidents. This study proposes a new "Bayesian Analytical Framework" for countermeasure assessment which combines "Subjective" Prior Information with "Logical" based Information. The newly proposed "Bayesian Analytical Framework" consists of the following three steps: The 1st step - Countermeasure Selection, Choice of Participants, Selection of Crashes; The 2nd step-Development of Crash History Manual and Countermeasure Evaluation Manual; The 3rd step-Development of AMFs through sound statistical tests. This study used the Komogorov-Smirnov(K-S) Test to determine whether two unknown distribution functions associated with the two populations are identical. The results of the study are that individual responses did not meet the K-S test of identical distributions. while individual vs. group distributions are identical. This indicates that combining the input of several people reduces the impact of individual subjectivity and assumptions and is important for developing a repeatable distribution to develop sound AMFs of countermeasures for reducing Roadway-Rail grade crossing accidents. The procedures of the AMF development conducted in this study can be used to estimate the safety effects of countermeasures for road segments and intersections, in addition to Roadway-Rail grade crossings.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.8
• /
• pp.26-33
• /
• 2017

Vehicle communication can facilitate efficient coordination among vehicles on the road and enable future vehicular applications such as vehicle safety enhancement, infotainment, or even autonomous driving. In the $3^{rd}$ Generation Partnership Project (3GPP), many studies focus on long term evolution (LTE)-based vehicle communication. Because vehicle speed is high enough to cause severe channel distortion in vehicle-to-vehicle (V2V) environments. We can utilize channel estimation methods to approach a reliable vehicle communication systems. Conventional channel estimation schemes can be categorized as least-squares (LS), decision-directed channel estimation (DDCE), spectral temporal averaging (STA), and smoothing methods. In this study, we propose a smart channel estimation scheme in LTE-based V2V environments. The channel estimation scheme, based on an LTE uplink system, uses a demodulation reference signal (DMRS) as the pilot symbol. Unlike conventional channel estimation schemes, we propose an adaptive smoothing channel estimation scheme (ASCE) using quadratic smoothing (QS) of the pilot symbols, which estimates a channel with greater accuracy and adaptively estimates channels in data symbols. In simulation results, the proposed ASCE scheme shows improved overall performance in terms of the normalized mean square error (NMSE) and bit error rate (BER) relative to conventional schemes.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.6
• /
• pp.31-42
• /
• 2019

Among the driving information recorded in the event data recorder (EDR), the speed information of the vehicle before the traffic accident is a very important factor that determines the punishment of the driver of the accident vehicle, the identification of the offender and the victim, and the possibility of avoiding the accident. Also, by analyzing the EDR data, the deceleration of the accident vehicle can be analyzed. In this study, the results of the braking test of the previous study and the analysis of the EDR data of the traffic accident vehicle were compared to suggest an appropriate deceleration value applicable to the calculation of the stopping distance. As a result of the braking test of the vehicle equipped with ABS of the previous study, the average deceleration of the vehicle was 0.79g ~ 0.94g. In addition, the deceleration value was calculated from 0.92g to 0.94g in the recent automobile safety evaluation braking test conducted by the Korea Automobile Testing & Research Institute. In addition, the deceleration value of 0.55g ~ 0.71g was calculated through the analysis of EDR data performed in this study, and the value was smaller than the deceleration value measured in the braking experiment of the previous study.