• Journal of the Korean earth science society
• /
• v.36 no.1
• /
• pp.36-50
• /
• 2015

The purpose of this study is to assign emission source profiles of volatile organic compounds (VOCs) and particulate matters (PMs) for chemical speciation, and to correct the temporal allocation factor and the chemical speciation of source profiles according to the source classification code within the sparse matrix operator kernel emission system (SMOKE) in the Seoul metropolitan area. The chemical speciation from the source profiles of VOCs such as gasoline, diesel vapor, coating, dry cleaning and LPG include 12 and 34 species for the carbon bond IV (CBIV) chemical mechanism and the statewide air pollution research center 99 (SAPRC99) chemical mechanism, respectively. Also, the chemical speciation of PM2.5 such as soil, road dust, gasoline and diesel vehicles, industrial source, municipal incinerator, coal fired, power plant, biomass burning and marine was allocated to 5 species of fine PM, organic carbon, elementary carbon, $NO_3{^-}$, and $SO_4{^2-}$. In addition, temporal profiles for point and line sources were obtained by using the stack telemetry system (TMS) and hourly traffic flows in the Seoul metropolitan area for 2007. In particular, the temporal allocation factor for the ozone modeling at point sources was estimated based on $NO_X$ emission inventories of the stack TMS data.

• Spatial Information Research
• /
• v.22 no.5
• /
• pp.27-41
• /
• 2014

Recently, BIM(Building Information Modeling) has been applied to the infrastructure such as road and bridge, and information about the outside environment of buildings is needed for maintaining and managing the large urban facilities. In addition, the convergence between spatial information and Big-data has a large potentiality, in respect that considerable profits and developments in other application problems such as various simulations and urban plans, national land security, may be brought about on the basis of the interoperability of information between BIM and GIS. Therefore, this study attempted to suggest the development direction of a model integrating building for spatial information analysis and city on the subject by comparing and analyzing difference between information system and shape expression of IFC, CityGML and LandXML to efficiently link information between IFC as a standard model of BIM and CityGML as a standard model in the GIS sector and to prepare a basic fusion strategy and a method of utilization between BIM and GIS. The result of the study are as follow. Firstly, contents and structure of IFC, CityGML and LandXML are compared and analyzed. Secondly, the development direction of iBUM(Integrated Building and Urban Model) suggested, which is based on convergence technology for analysis of space information. Finally, a strategy and method of the BIM and GIS are proposed in the iBUM environment.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.2
• /
• pp.1-13
• /
• 2016

In an effort to establish adaptive measures for low carbon use and climate change, this study developed storylines for shared socio-economic reference pathways(SSP) and simulated change in land use for each storyline. First, cellular automata modeling was performed using past data, and a transition rule for the local characteristics of each planning area under study was derived by comparing with the results of the base year. Second, three storylines were formulated based on the hypothesized change in land use for the SSP. SSP1, the scenario for sustainability, assumed that the land was developed into a compact city, SSP2 assumed the development of a road through the middle of the land while maintaining the current situation, and SSP3 assumed unsustainable development into a fragmented world. Third, change in land use depending on planning area was predicted by integrating the SSP scenarios with cellular automata(CA) modeling. According to the results of analysis using the SSP scenarios, the urban area ratio increased slightly up to 2020 in SSP1 and up to 2030 in SSP2 and did not change any more subsequently, but it increased continuously until 2050 in SSP3 that assumed low level urban planning. These results on change in land use are expected to contribute towards making reasonable decisions and policies on climate change, and the outcomes of simulation derived from spatial downscaling, if applied to vulnerability assessment, will be useful to set the priority of policies on climate change adaptation.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.26 no.4
• /
• pp.130-144
• /
• 2023

Recently, various positioning technologies are being researched based on signal-based positioning and image-based positioning to obtain accurate indoor location information. Among these, various studies are being conducted on image positioning technology that determines the location of a mobile terminal using images acquired through cameras and sensor data collected as needed. For video-based positioning, a method of determining indoor location is used by matching mobile terminal photos with virtual landmark images, and for this purpose, it is necessary to build indoor spatial information about various landmarks such as billboards, vending machines, and ATM machines. In order to construct indoor spatial information on various landmarks, a panoramic image in the form of a road view and accurate 3D survey results were obtained through c 13 buildings of the Electronics and Telecommunications Research Institute(ETRI). When comparing the 3D total station final result and the terrestrial lidar panoramic image coordinates, the coordinates and distance performance were obtained within about 0.10m, confirming that accurate landmark construction for use in indoor positioning was possible. By utilizing these terrestrial lidar achievements to perform 3D landmark modeling necessary for image positioning, it was possible to more quickly model landmark information that could not be constructed only through 3D modeling using existing as-built drawings.

• Journal of Korean Society for Atmospheric Environment
• /
• v.25 no.2
• /
• pp.154-166
• /
• 2009

In this study, 1-hour integrated $PM_{2.5}$ mass and chemical composition concentrations were monitored at the St. Louis-Midwest Supersite in Illinois. Time-resolved samples were collected one week in each of June 2001 (22 June to 28 June), November 2001 (7 November to 13 November), and March 2002 (19 March to 25 March). A total of 427 samples were collected by CAMM (continuous ambient mass monitor) and 15 compounds were analyzed by AAS, PILS (particle-into-liquid sampler), and TOT (thermal optical transmittance) method. PMF was applied to identify the sources and apportion the $PM_{2.5}$ mass to each source for highly time resolved data. In addition, the nonparametric regression (NPR) was applied to identify the predominant directions of local sources relative to wind direction. Also, this study performed compare the NPR analysis and location of actual local point sources at the St. Louis area. The PMF modeling identified nine sources and the average mass was apportioned to gasoline vehicle, road dust, zinc smelter, copper production, secondary sulfate, diesel emission, secondary nitrate, iron+steel, and lead smelter, respectively. These results suggested that this study results will be help for $PM_{2.5}$ source apportionment studies at similar metropolitan area, establish $PM_{2.5}$ standard, and establish effective emissions reduction strategies in Korea.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.4 no.3
• /
• pp.51-60
• /
• 2001

The travel behavior can be analysed microscopically using GPS because the travel characteristics can be found out by travelling two test cars loaded with GPS equipments. The speed difference and spacing variation between the lead vehicle and the following's in uninterrupted flow are the important variables related to capacity and safety. This study analysed these with data obtained by travelling the 4th Line and 28th Line of the national road. The variation width in speed difference in the run time is below 3.0%. But, related to the speed difference in the situation of acceleration and deceleration the difference after 4second is bigger than that just after the start. The spacing variation is similar to this. The spacing just before deceleration concerning safety was analysed. When the theoretical values by the modeling method and observed values were compared, the observed values were analysed 12.52% shorter than the other in average.

• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.111-119
• /
• 2011

The noise prediction model, KRON-2006, in South Korea has been developed for obtaining the average noise level. The model is based on an outdoor sound propagation method based on ISO9613 and ASJ Model-1998 and supports the analysis of the linear noise source, such as highway, for obtaining Leq. Because of that, the model can't obtain Lmax, Lmin from the time series noise profile based on traffic at every moment. In order to address this problem, the real time noise prediction model based on traffic simulation using GIS model and algorithm is proposed. It can predict the vehicle point noise level based on vehicle type, speed generated from traffic simulation by using headway and obtain Lmax, Lmin as integrating the noise profile generated from it at every moment. An evalution of the noise prediciton model using field measurements finds good agreement between predicted and measured noise levels at 1m, 8m, 15m from curb of the near side lane.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.6
• /
• pp.869-875
• /
• 2019

The service level of the roundabout is estimated through an analytic model using the geometrical characteristics and parameter values obtained from the observations. Although a lot of researches have been conducted on the rotational intersection through an analytical model, the case of variable combinations is enormous, suggesting the range and service level of appropriate traffic volume according to the case study or limited characteristics through simulation. Therefore, in this study, the roundabout analysis model was constructed by using Visual Basic Application to make variable adjustment more easily. The constructed model analyzes traffic conditions according to various situations and analyzes the characteristics of roundabouts. As the result of analysis, the more the ratio of left turn and U-turn, the more the traffic distribution of each approached road was biased to one side, the limit traffic volume of the roundabout decreased and congestion appeared quickly. In particular, the more uneven the distribution of traffic was, the less the Saturation traffic volume was affected by the turnover rate.

• International Journal of Highway Engineering
• /
• v.10 no.2
• /
• pp.145-157
• /
• 2008

Load transfer efficiency (LTE) reflects the structural performance of doweled and undoweled joints of Jointed Concrete Pavement (JCP). A 3-dimensional (3-D) model of JCP was built using ABAQUS software in this study. Three concrete slabs were placed on bonded sublayers composed of a base and subgrade. Spring elements were used to connect the adjacent slabs at joints. Different spring constants were input to the model to simulate different joint stiffness of the concrete pavement. The LTE of the joint increased with an increase of the spring constant. The effects of material properties and geometric shape on the behavior of JCP were analyzed using different elastic modulus and thickness of the slab and base in the modeling. The results showed the elastic modulus of the subgrade affected the behavior of the slab and LTE more than that of the base and the thickness of the slab and base. The effects of a negative temperature gradient on the behavior of the slab and LTE were more than that of positive and zero temperature gradients. Joints with low stiffness were more sensitive to the temperature gradient of the slab.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.11
• /
• pp.1231-1237
• /
• 2014

It is essential to perform driving performance tests of military vehicles on rough terrain. A full car test is limited by cost and time constraints, because of which a dynamic analysis via computer simulation is preferred. In this study, a vehicle model is developed using MSC.ADAMS, a commercial multibody analysis program, and compared via experiments. FTire is modeled using the results of a tire performance test to obtain the vertical stiffness. A nonlinear damper is modeled by a characteristic experiment. Leaf springs are modeled with beam force elements and consisted to a vehicle model. The vertical force and acceleration response of the wheel are identified when vehicle is passing over a simple bump as well as a sinusoidal road. The developed vehicle model is verified with the results of a full car test.