• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.5
• /
• pp.163-181
• /
• 2023

Improving the detection performance of facilities corresponding to the sensors of autonomous vehicles helps driving safety. In the road and transportation field, research is being conducted to improve the detection performance of sensors by road infrastructure or facilities. As part of this on the development of autonomous driving support infrastructure, the shape of traffic cones and drums to ensure sufficient LiDAR detection performance even rainy conditions and maintain the line-of-sight guidance function in construction zones improvement effect. The principle was to increase reflection performance and ensure no significant difference in shape from existing facilities. Traffic cones were manufactured in square pyramid shapes instead of cones, and drums were manufactured in hexagonal and octagonal pillar shapes instead of cylinders. LiDAR detection data for the facility was confirmed on a clear day and with 20 mm/h and 40 mm/h rainfall. The detection performance of the square pyramid-shaped traffic cone and octagonal column-shaped drum was to the existing facility. On the other hand, deviations occurred due to repeated measurements, and significance could not be confirmed through statistical analysis. By reflecting these results, future studies will seek a form in which data can be obtained uniformly despite the diversity of measurement environments.

• Journal of Korean Society of Transportation
• /
• v.31 no.3
• /
• pp.55-64
• /
• 2013

Conventionally, greenhouse gas (GHG) emissions in the transport sector have been estimated using the fuel consumption (i.e. Tier 1 method). However, the GHG emissions on road networks may not be practically estimated using the Tier 1 method because it is not practical to monitor fuel consumption on a road segment. Further, air pollutant emissions on a road may not be estimated efficiently by the Tier 1 method either due to the diverse characteristics of vehicles, such as travel speed, vehicle type, model year, fuel type, etc. Given these conditions, the goal of this study is to propose a Tier 3 level methodology to calculate $CO_2$ and $NO_X$ emissions on inter-regional roads using the information from ITS infrastructure. The methodology may avoid the under-estimation issue caused by the concavity of emission factor curves because the ITS speed or volume information is aggregated by a short time interval. The proposed methodology was applied to 4 road segments as a case study. The results show that the management of heavy vehicles' speed is important to control the $CO_2$ and $NO_X$ emissions on road networks.

• Journal of Korean Society of Transportation
• /
• v.23 no.5 s.83
• /
• pp.47-55
• /
• 2005

Roads deeply affect the life of people and keep doing an important role to support economic growth of a country. According to the budget plan of the ministry of construction and transportation of Korea, 8.1 trillion won have been allotted for road investment in the year of 2002 which occupy 61% of the transportation infrastructure special account (13.3 trillion won) and 4.7% of the total national budget (1,740 trillion won). It is true that services generated from road investment such as mobility enhancement and increased accessibility have shown positive effects through shortened travel time and decreased vehicle operating cost. However, it is also notable that many negative effects are gradually being discussed and those are nowadays getting severer due to enhanced people interests about road construction, increased concerns on environment and active public involvement that were evoked by traffic accidents, air pollution & noise and destruction of environment. Road construction processes in Korea are normally governed by administrative sectors (suppliers) not by users. These processes ate very weak to accomodate user s needs and community concerns thus easy to fail finalizing a road project without hassles. A public hearing process is supposed to be held in the processes of detailed design step and the environmental impact analysis. However, it is not enough to grab user's needs and community concerns. Increased public involvement frequencies, optimized public involvement timing and enhanced depth of public involvement magnitude are suggested to improve the current poor public involvement schemes in road planning and design processes. The application of these recommended methods to the road planning and design processes may guarantee the change from the current supplier-oriented schemes to the new user-oriented one. Also, this study suggests to reset objectivity and clarity of road construction process, to make conciliation guidelines based on many practical cases that produced good results, to introduce public involvement techniques in a stepwise basis, and to foster the professionals via education and training programs.

• Journal of Korea Port Economic Association
• /
• v.25 no.2
• /
• pp.95-114
• /
• 2009

The aim of this paper is to evaluate weight and priority values for 'inner consisted factors' and 'outer requested factors' of logistics system using the AHP(Analytic Hierarchicy Process) method. As for analysis regarding inner consisted factors, the results were shown as follows: a road transportation (0.312) as first rank; a marine transportation (0.269) as second rank; a railway transportation (0.239) as third rank; an air transportation (0.118) as fourth rank, and a pipeline transportation (0.063) as fifth rank. In terms of analysis regarding outer requested factors, the results were came out as follows: an infrastructure (0.322) as first rank; a performance (0.206) as second rank; an information system (0.151) as third rank; a human resources (0.121) as fourth rank, a business environment (0.075) as fifth rank; a connectivity (0.073) as sixth rank, and a political environment (0.052) as seventh rank.

• International Journal of Highway Engineering
• /
• v.17 no.4
• /
• pp.99-105
• /
• 2015

PURPOSES: This study aims to establish the priority of introducing anti-icing spray system for regions of the National Highways in South Korea. Using this study, a logical plan for instituting such an anti-icing spray system can be established for the National Highways. METHODS : The Analytical Hierarchy Process (AHP) was employed to prioritize the implementation of an anti-icing spray system on Korean highways. For this purpose, an existing scoring table developed by the Ministry of Land, Infrastructure Transport Affair was slightly modified in order to reflect recent trends in winter maintenance. A survey was conducted to gather the preferences regarding the developed hierarchy of road experts and agencies. Finally, the final score was produced by integrating the scoring results with estimated weights for each evaluation criterion. RESULTS: In general, Honam and the metropolitan areas have relatively high priority while other areas such as Chungcheong, Young Nam, and Gang Won appear to be uniform in importance in terms of establishing an anti-icing spray system. This result may indicate that historical weather data and traffic volumes are significant factors in deciding in winter maintenance polices CONCLUSIONS : In this study, useful insights are suggested regarding winter maintenance by simultaneously performing rapid snow removal and proactive treatment. Issues of resource allocation may be potential research items in the field transportation engineering.

• International Journal of Highway Engineering
• /
• v.17 no.6
• /
• pp.97-104
• /
• 2015

PURPOSES : Expressways experience chronic and recurring congestion, especially during weekends and holidays, because of the increased demands for leisure-related travel. The alternatives to solve chronic and recurring congestion may be three-fold: (1) physical expansion of expressway capacities, (2) road pricing, and (3) temporal and spatial distribution of traffic demands. Among these, the third alternative may be the most cost-effective method for the Korea Expressway Corporation (KEC) that can be achieved by using the existing ITS infrastructure. METHODS : KEC initiated a pilot study in which the traffic on congested expressways was managed by providing traffic condition information (i.e., travel times) of neighboring national highways for taking detours via variable message signs (VMS). This study aimed to estimate the detour rate, and the two pilot studies on Seohaean and Yeongdong expressways yielded many benefits. RESULTS : It was revealed that the total length of congestion segments decreased by 7.8 km, and the average travel speed increased by 5.3 km/h. CONCLUSIONS : Based on these findings, it was concluded that the propagation of detour information via VMSs during congestion hours can help reduce congestion on expressways and increase the benefits of the entire network.

• International Journal of Highway Engineering
• /
• v.19 no.5
• /
• pp.1-11
• /
• 2017

PURPOSES : This study is aimed at development of a stochastic pavement deterioration forecasting model using National Highway Pavement Condition Index (NHPCI) to support infrastructure asset management. Using this model, the deterioration process regarding life expectancy, deterioration speed change, and reliability were estimated. METHODS : Eight years of Long-Term Pavement Performance (LTPP) data fused with traffic loads (Equivalent Single Axle Loads; ESAL) and structural capacity (Structural Number of Pavement; SNP) were used for the deterioration modeling. As an ideal stochastic model for asset management, Bayesian Markov multi-state exponential hazard model was introduced. RESULTS:The interval of NHPCI was empirically distributed from 8 to 2, and the estimation functions of individual condition indices (crack, rutting, and IRI) in conjunction with the NHPCI index were suggested. The derived deterioration curve shows that life expectancies for the preventive maintenance level was 8.34 years. The general life expectancy was 12.77 years and located in the statistical interval of 11.10-15.58 years at a 95.5% reliability level. CONCLUSIONS : This study originates and contributes to suggesting a simple way to develop a pavement deterioration model using the total condition index that considers road user satisfaction. A definition for level of service system and the corresponding life expectancies are useful for building long-term maintenance plan, especially in Life Cycle Cost Analysis (LCCA) work.

• Industrial Engineering and Management Systems
• /
• v.13 no.2
• /
• pp.172-184
• /
• 2014

Economic growth with rising household income has put more vehicles on the roads worsening traffic congestion, road accidents, and air and noise pollution. This situation is further aggravated by the potential working population who choose to drive to work instead of taking public transportation. Public bus transport (PBT) plays an important role in alleviating these problems. PBT is underutilized in Malaysia, and there is an opportunity to increase ridership without substantial investment. Therefore, this study was conducted to investigate the factors that influence the use of PBT in Malaysia. The data were collected using structured questionnaires from 400 respondents. The results of the analysis show that the twin factors consisting of perceived satisfaction of and perceived importance by users towards safety and comfort of facilities and services offered by PBT are significantly related to intention to use those services. The satisfaction of availability of season tickets, the importance of reliability of bus schedule and time table, and the importance of ticket pricing are also significant. By providing insights for both public bus operators and the government, this paper contributes to mitigate the underutilization of PBT in Malaysia and the consequences of putting more vehicles on the roads. From the theory perspective, this paper also contributes by extending the theory of reasoned-action to transportation studies.

• Journal of Korean Port Research
• /
• v.7 no.2
• /
• pp.69-90
• /
• 1993

Today, the problem of the logistics rationalization has significant meanings as one of the new strategies for improving the power in the international competition. In order to achieve the logistics rationalization, the enhanced recognition to logistics of each enterprise is essential. However, the complete arrangement of the logistics external environment, that is, logistics infrastructure is also one of the most important matters. In this respect, to rationalize the container logistics, this paper deals with the strategies for strengthening the function of Pusan port which is handling the 95% of the export and import container. Some suggestions for those are as follows : First, the coastal container transportation system must be strengthened to dissolute the preponderance of road transportation. Second, a new large port must be developed at Gadeok island to handle the increasing container traffic in the years of 2000. Third, the port authority must be established under the cooperation of the central government and local government to comply with the necessity of the synthetic control for city and port. Fourth, the Inland Clearance Depot in going must be promptly completed to establish the efficient and synthetic container logistics system.

• The Journal of the Korea Contents Association
• /
• v.20 no.12
• /
• pp.301-310
• /
• 2020

The purpose of paper is to find index for building digital database of bike infrastructure statistics by analyzing the existing design standards and manuals. The design standards and guides of both central and local governments which designates the design elements of bikeway were investigated to find the primary index, and then the attribute data of bikeway were grouped into four categories including transportation, geometry, pavement, safety and utility facility, and were analyzed to find the secondary index. A FGI(Focus Group Interview) was conducted with experts in the arena of transportation to collect the opinions on the selected index. It is found that the final twenty four design elements were selected and additional six elements were added. The proposed twenty four index of bikeway design elements are considered to be included when building the digital bikeway register database.