• Journal of The Geomorphological Association of Korea
• /
• v.27 no.2
• /
• pp.81-97
• /
• 2020

Geopark refers to a single boundary area consisting of a collection of geosites and geotrails, which includes ecological, historical and cultural elements based on geological and geomorphological resources. To ensure the continued development and conservation of existing listed geoparks, it is necessary to carry out an environmental sensitivity analysis of the geopark components by utilizing spatial information from various scales. The objectives of this study are to analyze the environmental sensitivity in Cheongsong UNESCO global geopark in relation with slope disaster using GIS and to understand its spatial distribution in connection with geosites and geotrails. Two types of spatial database were constructed; geosites and geotrails in Cheongsong UNESCO global geopark and spatial data to perform environmental sensitivity. Potential soil loss and slope stability were analyzed to derive environmental sensitivity related to slope hazard. The results showed relatively high environmental sensitivity along the drainage network of Cheongsong UNESCO global geopark. Zonal statistics analysis was conducted for further detailed distribution of environmental sensitivity based on buffer zones of geosites and geotrails. Majority of geological sites, geological trails, Jeolgol gorge~Jusan Pond section in hiking trails, and Dalgi Mineral Spring Site~Artistic Genius Republic of Korea(Jangnankki gonghwaguk) section in road areas show relatively high slope hazard sensitivity within buffer zones.

• The Journal of Engineering Geology
• /
• v.17 no.3
• /
• pp.393-404
• /
• 2007

The purpose of this study is to capture the essentials in survey and evaluation scheme which are able to assess the hazard of a rock slope systematically. Statistical analysis are performed on slope instability parameters related to failure of the rock slope. As the slope instability parameters, twelve survey items are considered such as tension crack, surface deformation, deformation of retaining structures, volume of existing failures, angles between strike of discontinuity and strike of cut slope face, angles between dip of discontinuity and dip of cut slope face, discontinuity condition, cut slope angle, rainfall or ground water level, excavation condition, drainage condition, reinforcement. A total of 233 road cut slopes located in Gyeongnam were considered. The stability of the road cut slopes were evaluated by estimating the slope instability index(SII) and corresponding stability rank. 126 rock slopes were selected to analyze statistical relation between SII and slope instability parameters. The multiple regression analysis was applied to derive statistical models which are able to predict the SII and corresponding slope stability rank. Also, its applicability was explored to predict the slope failures using the variables of slope instability parameters. The results obtained in this study clearly show that the methodology given in this paper have strong capabilities to evaluate the failures of the road cut slope effectively.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.2
• /
• pp.69-77
• /
• 2015

In Korea, local governments have decided the location of shelters as part of their disaster planning. However, no quantitative standards, such as assuming different hazard and shelter types, shelters' capacity, are specified in that planning. To propose the direction of disaster evacuation policy, first of all, the current state of shelters' location and evacuation area is needed to be analyzed. In addition, considering topographical condition such as road slope and physical strength by age are important factors to measure optimal evacuation route. The purpose is to suggest a new methodology of estimating optimal evacuation route considering resistance of road slope and difference of walking speed by age. Moreover, as a case study of Seoul, Korea, using coverage analysis of GIS analysis tool, the accessible area (or vulnerable area) to the shelters is evaluated based on the spatial distribution of disaster evacuation shelters and their accommodation capacity, according to evacuation time within 7.5, 15 and 30 minutes. The main results are summarized as follows: 1) The average area of disaster evacuation shelter per person is calculated as 0.45 square meters. Considering that the minimum shelters' area per person is 1 square meters, only 45% of people in Seoul can be accommodated. 2) The ratio of inhabitants who live in accessible area within 7.5 minutes presents only 33% of all. Furthermore, the ratio of inhabitants by age group of 5~9 or over 65 years old shows significantly lower percentage in comparison with 15~49 years old people.

• Tunnel and Underground Space
• /
• v.8 no.2
• /
• pp.107-117
• /
• 1998

In the case of a fire disaster in a uni-directional road tunnel, it is important to determine the critical ventilation velocity to prevent the backflow travelling toward the tunnel exit where vehicles are stopped. The critical ventilation velocity is horizontal velocity to prevent hot smoke from moving toward the tunnel exit. According to Froude modelling, the model tunnel whcih was 300mm in diameter and 21 m in length was made of acryl tubes. Inner section of acryl tubes was clothed with polycarbonate. 1/20 scaled model vehicles were installed to simulate the situation that vehicles are stopped in the tunnel exit. Methanol in a pool type burner was burned in the middle of tunnel to simulate a fire hazard. In this study, the basis of determining the critical ventilation velocity is the ventilation flow rate that is able to maintain the allowable CO concentration in the tunnel section. We assumed that the allowable CO concentration was backflow dispersion index. Futhermore, We intended to find out CO distribution and temperature distribution according as we changed ventilation velocity. The results of this study were that no backflow happened when ventilation velocity was 0.52 m/s in the case of 5.75 kW. If we adapt these results of a fire disaster releasing 10MW heat capacity in real tunnel which is 400m in length, no backflow happens when ventilation velocity is 2.31m/s. After we figured out dimensionless heat release rate and dimensionless ventilation velocity of model test and those of real test to verify experimental correctness, we tried to find out correlation between experimental results of model tunnel and those of real tunnel.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.222-234
• /
• 2020

Autonomous vehicles are equipped with a wide rage of sensors such as GPS, RADAR, LIDAR, camera, IMU, etc. and are driven by recognizing and judging various transportation systems at intersections in the city. The accident ratio of the intersection of the autonomous vehicles is 88% of all accidents due to the limitation of prediction and judgment of an area outside the sensing distance. Not only research on non-signalized intersection collision avoidance strategies through V2V and V2I is underway, but also research on safe intersection driving in failure situations is underway, but verification and fragments through simple intersection scenarios Only typical V2V failures are presented. In this paper, we analyzed the architecture of the V2V module, analyzed the causal factors for each V2V module, and defined the failure mode. We presented intersection scenarios for various road conditions and traffic volumes. we used the ISO-26262 Part3 Process and performed HARA (Hazard Analysis and Risk Assessment) to analyze the risk of autonomous vehicle based on the simulation. We presented ASIL, which is the result of risk analysis, proposed a monitoring concept for each component of the V2V module, and presented monitoring coverage.

• Toxicological Research
• /
• v.17
• /
• pp.41-45
• /
• 2001

The methods used for risk assessment from exposure to chemicals are well established. in most cases where toxicity other than carcinogenesis is being considered, the standard method relies on establishing the No Observed Adverse Effect Level (NOAEL) in the most sensitive animal toxicity study and using an appropriate safety factor (SF) to determine the exposure which would be associated with an acceptable risk. For carcinogens a different approach is used because it has been argued there is no threshold of effect. Thus mathematical equations are used to extrapolate from the high doses used in ani-mal experiments. These methods have been strongly criticised in recent years on several grounds. The most cogent criticisms are a) the equations are not based on a thorough understanding of the mechanisms of carcinogenesis and b) the outcome of a risk assessment based on such models varies more as a consequence of changes to the assumptions and equation used than it does from the data derived from carcinogenicity experiments. Other criticisms include the absence of any measure of the variance on the risk assessment and the selection of default values that are very conservative. Recent advances in the application of risk assessment emphasise that measures of both the exposure and the hazard should be considered as a distribution of values. The outcome of such a risk assessment provides an estimate of the distribution of the risks.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.91-91
• /
• 2011

The quality of the surface layer in concrete structures plays an important role in the durability of the concrete. The concrete factory products are made as they improve the appearance of the surface and compressive strength in need. A common criterion to judge the quality of concrete products frequently seen in our daily life appears to be "beauty" in terms of consistent shaping. However, as for most concrete curb in such areas where a large amount of anti-freezing agents(NaCl) and ice and snow melting agents(CaCl2) are spread over roads to ensure road safety during the winter season, since deterioration advances from the surface, scaling is seen on the surface concrete due to deterioration which combined freezing damage and salt damage. Especially, In cold northern districts, the spreading amount of deicing salts increases by regulation of studded tire use, and the scaling of the concrete products, the various parts of concrete structures for roads is increasing in recent years. In this study, L-shape concrete curb were targeted, the permeable form method with the commercial permeable sheet was applied to it and the improvements of the quality were examined. By the permeable form method, surface layers got strengthened, which prevented permeation of the deterioration factor from the outside, and the scaling resistance of the upper surface where the permeable sheet was applied improved exceedingly. It will be expected by applying the permeable form method to various concrete products that frost resistance improves and scaling damage decreases.

• Journal of the Korean Society of Safety
• /
• v.31 no.1
• /
• pp.105-110
• /
• 2016

Mountainous disasters such as landslides and debris flow are difficult to forecast. Debris flow in particular often flows along the valley until it reaches the road or residential area, causing casualties and huge damages. In this study, the researchers selected Seoraksan National Park area located at Inje County (Inje-gun), Gangwon Province-where many mountainous disasters occur due to localized torrential downpours-for the damage reduction and cause analysis of the area experiencing frequent mountainous disasters every year. Then, the researchers conducted the field study and constructed geospatial information data by GIS method to analyze the characteristics of the disaster-occurring area. Also, to extract more precise geographic parameters, the researchers scanned debris flow triggering area through terrestrial LiDAR and constructed 3D geographical data. LiDAR geographical data was then compared with the existing numerical map to evaluate its precision and made the comparative analysis with the geographic data before and after the disaster occurrence. In the future, it will be utilized as basic data for risk analysis of mountainous disaster or disaster reduction measures through a fine-grid topographical map.

• Korean Journal of Ecology and Environment
• /
• v.50 no.4
• /
• pp.374-380
• /
• 2017

Pine wilt disease (PWD) is one of the hazardous pine tree diseases in whole world. In Korea, PWD has been spreading since it was first observed in Busan in 1988. Dispersion of PWD is mainly mediated by its vectors such as Japanese pine sawyer. In this study, we characterized environmental condition including meteorological factors, geographical factors, and land use factors influencing on the occurrence of PWD. The occurrence data of PWD were collected at 153 sites where were the initial occurrence sites of PWD in local government regions such as city, Gun, or Gu scale. We used Akaike Information Criterion (AIC) to evaluate the relative importance of environmental variables on the discrimination of occurrence or absence of PWD. The results showed that altitude, slope, and distance to road were the most influential factors on the occurrence of PWD, followed by distance to building. Finally, our study presented that human activities highly influenced on the long term dispersal of PWD.

• Journal of the Korean Society of Safety
• /
• v.19 no.3 s.67
• /
• pp.70-77
• /
• 2004

A Reasonable lighting should be provided for doing night work. All works far construction site can be exposed to potential hazard at night work The purpose of this study is to provide a standard of the lighting against accidents due to insufficient lighting at site. one pilot tea one at building work site, one at mad work site of it have been conducted for figuring out illumination change depending worker's activity direction, using lux checker to show it as numerical indication. The direction are changed with a range of 30, 60, 90, and 135 degree to be checked at site. Tests results show that $10\%\;and\;15\%$ of lighting could be decreased by changing the working direction of works at site. Therefore, steep slope place, cave work and backside of structural elements such as a column, deep beam should be considered for keeping sufficient and reasonable lighting. It is found that $50\%more$ illumination Lux needs f3r civil work than for building work.