• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.67-70
• /
• 2008

As a part of the project on road tunnel fire safety system development, Quantitative Risk Assessment program was developed. In this study, We carried out Quantitative Risk Assessment with this program by using a factor of cross passage interval, warning announcement time and congestion ratio etc for 1km tunnel with natural ventilation. In the case of 250m below of cross passage interval, Risk value due to warning announcement time was a slightly changed. but if cross passage interval is more than 250m, expected fatalities in the same HRR(heat release rate) was sharp increased. As a result, Quantitative Risk Assessment program which was developed in this research project is possible to risk assessment with ventilation type, cross passage for evacuation and detection system response property etc. hereafter, this program look forward to use as a tool for road tunnel performance based design.

• 대한교통학회지
• /
• 제27권4호
• /
• pp.155-166
• /
• 2009

국내에서의 도로설계 안전성 평가는 도로설계 전문가의 설계도면 검토, 현장방문을 통한 자문자료를 통하여 이루어져왔다. 이러한 설계 안전성 평가는 전문가의 판단을 뒷받침 할 수 있는 객관적인 근거가 부족하다는 문제점과 안전측 편익을 계산하기 위한 수치적인 결과가 부족하다는 문제점이 있다. 본 연구에서는 이러한 문제점을 개선 보완할 수 있는 도로설계 안전성 평가 시스템을 개발하기 위해 IHSDM의 국내도로 적용성 평가, 잠재적 사용자 요구분석을 수행하였다. IHSDM의 사고예측모듈에서 안전성을 평가하기 위해 도로구간별 사고빈도 및 사고율을 산정하는 방법론과 도로의 특성을 반영할 수 있도록 하고 있는 AMF의 개발은 기존의 사고예측모형을 통한 사고예측이나 전문가 판단을 통한 안전성 평가의 한계점을 보완하고 있다. 그러나 이 같은 장점에도 불구하고 국내도로의 IHSDM 적용성 평가 결과 국내도로의 사고를 과대 예측하는 경향을 보여 국내도로의 사고특성을 반영하지 못하는 것으로 나타났다. IHSDM이 반영하지 못하는 대표적 지방부 국내도로 특성으로는 도로변 토지이용도와 미국과는 상이한 지방부 도로의 교통량특성인 것으로 나타났다. 또한, 사용자 요구분석을 통해서는 데이터 입력방식과 도출된 결과를 제시하는 방법의 다양성과 편의성이 확보가 중요시 되는 것으로 분석되었다.

• 시스템엔지니어링학술지
• /
• 제1권1호
• /
• pp.39-45
• /
• 2005

Systems Engineering is the process that controls the technical system development effort with the goal of achieving an optimum balance of all system elements. FRACAS(Failure Reporting an d Corrective Action System) is one of RAMS(Reliability, Availability, Maintainability, Safety) tasks which is conducted from a manufacturing phase. FRACAS is to determine the basic cause of failure resulting from design or manufacture, and to provide a closed-loop method of implementing corrective action. This paper presents the FRACAS established for assessment of the reliability, the analysis and management of the failure data for Korean High Speed Train and application cases.

• 자동차안전학회지
• /
• 제7권4호
• /
• pp.26-30
• /
• 2015

Exceeding the speed limit during vehicle driving is a key factor in the severity of lots of road accidents, and SLIF(Speed Limit Information Function) application is in the initial phase in Korea. SLIF helps the drivers to observe a speed limit when they are driving by providing alert and informing the current limit speed information based on external data using camera and/or digital map, for that reason, environmental conditions could be causes of SLIF malfunctions. In this study, design adequacy analysis of SLIF in respect of false recognition as the Korea traffic environment has been performed. As tentative results, road conditions and structure of speed limit sign as well as system performance often caused misrecognition.

• 대한임베디드공학회논문지
• /
• 제19권2호
• /
• pp.101-106
• /
• 2024

For the commercialization of automated vehicles, it is necessary to create various scenarios that can evaluate driving safety and establish a data system that can verify them. Depending on the vehicle's ODD (Operational Design Domain), there are numerous scenarios with various parameters indicating vehicle driving conditions, but no systematic methodology has been proposed to create and combine scenarios to test them. Therefore, projects are actively underway abroad to establish a scenario library for real-world testing or simulation of autonomous vehicles. However, since it is difficult to obtain data, research is being conducted based on simulations that simulate real road. Therefore, in this study, parameters calculated through individual vehicle trajectory data extracted based on roadside CCTV image-based driving environment DB was proposed through the extracted data. This study can be used as basic data for safety standards for scenarios representing various driving behaviors.

• 대한안전경영과학회지
• /
• 제11권2호
• /
• pp.159-165
• /
• 2009

Through the understanding of the change of productivity and the ability of error recovery according to aging and the assessment and analysis of them, we may take this research to contribute to make a design for the road-map to help set up the policy of employment for old generation. For this we have taken an experiment of the coordination tester for 100 person who are chosen randomly and analysed the collected data using SAS, which is one of widely used statistical analysis packages. The main results are as follow: $\circledcirc$ The result of regression between the working speed and the length of the correction of error shows independence. (pr>0.2029). $\circledcirc$ The regression between age and working speed is statistically significant. (pr<0.0001) $\circledcirc$ The relation between age and the length of the correction of error is not significant. (pr>0.9123).

• Structural Monitoring and Maintenance
• /
• 제5권3호
• /
• pp.363-377
• /
• 2018

The proper functioning of critical points on transport infrastructure is decisive for the entire network. Tunnels and bridges certainly belong to the critical points of the surface transport network, both road and rail. Risk management should be a holistic and dynamic process throughout the entire life cycle. However, the level of risk is usually determined only during the design stage mainly due to the fact that it is a time-consuming and costly process. This paper presents a simplified quantitative risk analysis method that can be used any time during the decades of a tunnel's lifetime and can estimate the changing risks on a continuous basis and thus uncover hidden safety threats. The presented method is a decision support system for tunnel managers designed to preserve or even increase tunnel safety. The CAPITA method is a deterministic scenario-oriented risk analysis approach for assessment of mortality risks in road tunnels in case of the most dangerous situation - a fire. It is implemented through an advanced risk analysis CAPITA SW. Both, the method as well as the resulting software were developed by the authors' team. Unlike existing analyzes requiring specialized microsimulation tools for traffic flow, smoke propagation and evacuation modeling, the CAPITA contains comprehensive database with the results of thousands of simulations performed in advance for various combinations of variables. This approach significantly simplifies the overall complexity and thus enhances the usability of the resulting risk analysis. Additionally, it provides the decision makers with holistic view by providing not only on the expected risk but also on the risk's sensitivity to different variables. This allows the tunnel manager or another decision maker to estimate the primary change of risk whenever traffic conditions in the tunnel change and to see the dependencies to particular input variables.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2006년도 춘계학술발표회 논문집
• /
• pp.431-436
• /
• 2006

The latest system of GIS has been changing from 2 dimension to 3 dimension. According to the rapid growth of the fields linked to 3D GIS, 3D GIS has variously affected the public field, the national defense field, and the industrial field. This study estimated sight distance safety of curve section considering the environmental impact based on 3D GIS. Sight distance is calculated from the relation between road which keeps the three-dimension character and driver gaze, so it needs to consider both plane and vertical ior the accurate measuring. This study made analysis of the sight distance through considering the environmental impact with driving simulation of design speed 80km/h and running speed 60-120km/h.

• 한국도로학회논문집
• /
• 제17권5호
• /
• pp.105-113
• /
• 2015

PURPOSES: The aim of this study is to analyze and compare the operational effectiveness and safety of three different types of roundabout found in the literatures using a VISSIM and SSAM program. METHODS : The three types roundabout tested are the 2-lane roundabout (2R), the Turbo roundabout (TR), and the Flower roundabout (FR). For each scenario, three roundabout types and traffic conditions such as traffic volume and movement ratio were applied to VISSIM in order to compute the average delays. In addition the total conflict was calculated through SSAM by using trajectory data from VISSIM. RESULTS: From the analysis results, the average delay in TR and FR type was higher than the 2R. Regardless of the roundabout types, the average delay was reduced as the right-turn vehicles increased. The total conflict in TR was fewer than 2R for all traffic conditions. CONCLUSIONS : The results of this study can be used in the planning and design process of roundabout deployment. The data also provides some numerical justifications in transition from at-grade intersection to roundabout.

• 자동차안전학회지
• /
• 제7권3호
• /
• pp.30-34
• /
• 2015

This study examined the Korean drivers' acceptance of SAS(Speed Assistance systems) and traffic sign conditions in Korea roads for SLIF(Speed Limit Information Function) that is a part of SAS. Exceeding the speed limit is a factor in the severity of many road accidents and SAS would help the driver to observe a speed limit by warning and/or effectively limiting the speed of the vehicle. SAS are in the initial phase in Korea, Korean drivers could not be familiar with automatical speed limiting during driving, SAS interface design would be considered to be more readily acceptable to the public. And advanced SAS have been introduced onto the market which are able to inform the driver of the current speed limit based on camera and/or digital maps based SLIF. These systems are based on external data using sensors, so environmental conditions are an important factor which could cause malfunction of SLIF functions.