• 한국산업융합학회 논문집
• /
• 제3권4호
• /
• pp.319-327
• /
• 2000

In this study, the hydraulic characteristics variation of flood level caused by tree-planting condition in channel section is evaluated through the examination and analysis of back water characteristics in a natural channel within urban area where the improvement is completed. The study channel is Sinchun runs through the center of Taegu metropolitan city. For the analysis, the comparative examination of runoff characteristics depend on tree- planting condition performed for the flood level of the most upstream point, and velocity of study channel when the project flood flows according to three cases that existing channel is improved to the pro-natural channel, the roughness condition of both riverside highlands is changed, and the composition rate of trees in the riverside highlands is changed. It is known that the variation ranges of the flood level increase remarkably in general, and of the velocity decrease from the result of the examination for the hydraulic characteristics parameters at the most upstream point depend on the tree-planting condition of the channel section when the project flood flows. From the results of the above study on the variation of the hydraulic characteristics according to the tree-planting condition in channel section, it is known that the hydraulic characteristics when the project flood flows in channel have close relationship with the section properties and the slope of channel.

• 한국자기학회지
• /
• 제25권5호
• /
• pp.169-173
• /
• 2015

철원 한탄강 유역에서 채취한 화산암인 현무암 시료에 대하여 X-선 회절분석 실험, X-선 형광 분광 분석 및 $M{\ddot{o}}ssbauer$ 분광 분석으로 물리적 특성을 조사하여 현무암의 화학적 조성과 시료 내에 존재하는 Fe의 원자가 상태와 자기적 성질을 연구하였다. 철원 한탄강 유역에서 채취한 화산암인 현무암 시료는 알칼리 장석 계열의 광물들이 주 광물로 구성되어 있으며, 휘석과 티탄철석과 감람석이 포함되어 있음을 알 수 있었다. 이 지역에서 채취한 화산암인 현무암은 제주도 화산암에 비하여 상대적으로 많은 $SiO_2$ 중량 비와 상대적으로 적은 양의 Fe 화합물을 포함하고 있음을 알 수 있었다. $M{\ddot{o}}ssbauer$ 분광 분석 결과로부터 철원지역 한탄강 유역에서 채취한 화산암인 현무암 시료들에서 다양한 clay mineral에 포함된 $Fe^{3+}$에 의한 한 개의 2중선과 휘석과 티탄철석 그리고 감람석등에 포함되어 있는$Fe^{2+}$에 의한 2개의 2중선들이 나타나고 있음을 알 수 있으며, $Fe^{2+}/Fe^{3+}$ 비가 2.27~3.42 정도임을 알 수 있었다.

• 청정기술
• /
• 제28권2호
• /
• pp.182-192
• /
• 2022

This study provides an overview of the production costs of methane and hydrogen via water electrolysis-based hydrogen production followed by a methanation based methane production technology utilizing CO₂ from external sources. The study shows a comparative way for economic optimization of green methane generation using excess free electricity from renewable sources. The study initially developed the overall process on the Aspen Plus simulation tool. Aspen Plus estimated the capital expenditure for most of the equipment except for the methanation reactor and electrolyzer. The capital expenditure, the operating expenditure and the feed cost were used in a discounted cash flow based economic model for the methane production cost estimation. The study compared different reactor configurations as well. The same model was also used for a hydrogen production cost estimation. The optimized economic model estimated a methane production cost of $11.22/mcf when the plant is operating for 4000 hr/year and electricity is available for zero cost. Furthermore, a hydrogen production cost of $2.45/GJ was obtained. A sensitivity analysis was performed for the methane production cost as the electrolyzer cost varies across different electrolyzer types. A sensitivity study was also performed for the changing electricity cost, the number of operation hours per year and the plant capacity. The estimated levelized cost of methane (LCOM) in this study was less than or comparable with the existing studies available in the literature.

• 청정기술
• /
• 제29권1호
• /
• pp.53-58
• /
• 2023

This study shows the summary of the economic performance of excess electricity conversion to hydrogen as well as methane and returned conversion to electricity using a fuel cell. The methane production process has been examined in a previous study. Here, this study focuses on the conversion of methane to electricity. As a part of this study, capital expenditure (CAPEX) is estimated under various sized plants (0.3, 3, 9, and 30 MW). The study shows a method for economic optimization of electricity generation using a fuel cell. The CAPEX and operating expenditure (OPEX) as well as the feed cost are used to calculate the discounted cash flow. Then the levelized cost of returned electricity (LCORE) is estimated from the discounted cash flow. This study found the LCORE value was ¢10.2/kWh electricity when a 9 MW electricity generating fuel cell was used. A methane production plant size of 1,500 Nm³/hr, a methane production cost of $11.47/mcf, a storage cost of $1/mcf, and a fuel cell efficiency of 54% were used as a baseline. A sensitivity analysis was performed by varying the storage cost, fuel cell efficiency, and excess electricity cost by ±20%, and fuel cell efficiency was found as the most dominating parameter in terms of the LCORE sensitivity. Therefore, for the best cost-performance, fuel cell manufacturing and efficiency need to be carefully evaluated. This study provides a general guideline for cost performance comparison with LCORE.

• 한국지리정보학회지
• /
• 제18권2호
• /
• pp.174-189
• /
• 2015

본 연구는 낙동강 유역의 수생태계 건강성 조사지점에서 생물 및 서식환경, 수질에 대한 건강성을 조사 및 평가한 결과자료를 이용하여 공간정보로 재구축하고 공간분석기법을 활용하여 낙동강 유역의 수생태계 보전 및 복원 정책의 합리적인 의사결정을 지원하고 효율적인 관리방안을 제시하는데 목적이 있다. 낙동강 유역의 수생태계 건강성을 분석하기 위하여 250개 조사구간의 수생태계 건강성 조사 및 평가 결과자료를 각 지점별 위치정보를 기반으로 점형 자료로 구축하였다. 그리고 공간적인 분석기법의 적용을 위해 면형 자료로 재구축 할 필요성이 있으며, 이를 위해 Kriging 보간법(ArcGIS 10.1, Geostatistical Analysis)을 활용하여 공간적 영향력 및 트랜드를 분석하였고 면형 자료로 재구축 하였다. 이를 바탕으로 낙동강 유역 건강성의 공간분포 특성을 분석하기 위해 Hotspot(Getis-Ord Gi, $G^*_i$)과 LISA(Local Indicator of Spatial Association), 표준편차타원체(Standard deviational ellipse) 분석을 활용하였다. Hotspot 분석 결과 생물지수(TDI, BMI, FAI)의 Hotspot 유역은 안동댐 상류, 왕피천, 임하댐 유역으로 생물지수의 건강성 등급이 양호한 것으로 분석되었으며, Coldspot 유역은 낙동강 남해, 낙동강 하구, 수영강 등의 유역으로 나타났다. LISA 분석 결과 이례지역은 가화천, 합천댐 상류, 영강 상류 유역으로 분석되었으며 이 지역은 생물 건강성 지수가 높은 유역이지만 주변 유역의 건강성이 낮아 수생태계 건강성에 대한 관리가 필요한 유역으로 분석되었다. 이화학적 요인(BOD)의 Hotspot 유역은 낙동강하류 유역과 수영강, 회야강, 낙동강남해 유역으로 나타났으며, Coldspot 유역은 안동댐, 임하댐, 영강 등 낙동강 지류의 상류 유역으로 분석되었다. 서식 및 수변환경(HRI)요인의 Hotspot과 LISA 분석결과 요인별 Hotspot과 Coldspot이 다르게 분석되었으나 일반적으로 낙동강 상류, 안동댐, 임하댐, 합천댐 유역 등 낙동강 본류와 지류의 상류 유역 서식 및 수변환경 건강성이 좋은 것으로 분석되었다. 서식 및 수변환경 요인이 Coldspot으로 나타난 유역들은 생물지수와 이화학적 요인의 건강성 지수도 낮게 나타나 서식 및 수변환경의 관리가 필요한 유역으로 판단할 수 있다. 표준편차타원체로 분석한 시계열 분석결과 생물과 서식 및 수변환경에 의한 수생태계 건강성이 좋은 지역이 점점 북쪽으로 이동하는 경향을 나타내고 있으며 BOD 결과는 조사년도에 따라 방향과 집중도가 각각 다르게 나타나는 것으로 분석되었다. 이러한 수생태계 건강성 분석 결과는 조사지점별 건강성 관리정보뿐만 아니라 향후 공간정보 기술기반 수환경 연구와 실무연구진을 위한 집수구역 단위 수생태계를 관리할 수 있는 정보를 제공할 수 있을 것으로 판단된다.

• 호남수학학술지
• /
• 제37권2호
• /
• pp.245-252
• /
• 2015

This paper is in continuation of the paper very recently published [New Laplace transforms of Kummer's confluent hypergeometric functions, Math. Comp. Modelling, 55 (2012), 1068-1071]. In this paper, our main objective is to show one can obtain so far unknown Laplace transforms of three rather general cases of generalized hypergeometric function $_2F_2(x)$ by employing generalized Watson's, Dixon's and Whipple's summation theorems for the series $_3F_2$ obtained earlier in a series of three research papers by Lavoie et al. [5, 6, 7]. The results established in this paper may be useful in theoretical physics, engineering and mathematics.

• 호남수학학술지
• /
• 제34권3호
• /
• pp.467-472
• /
• 2012

The aim of this paper is to provide two interesting summation formulae with the argument unity for the generalized hypergeometric function of higher order. The results are obtained with the help of two new summation formulae very recently obtained by Kim et al.. Summation formulae obtained earlier by Carlson and re-derived by Exton turn out to be special cases of our main findings.

• 호남수학학술지
• /
• 제35권3호
• /
• pp.407-415
• /
• 2013

Very recently, Rakha and Rathie obtained an extension of the classical Saalsch$\ddot{u}$tz's summation theorem. Here, in this paper, we first give an elementary proof of the extended Saalsch$\ddot{u}$tz's summation theorem. By employing it, we next present certain extenstions of Ramanujan's result and another result involving hypergeometric series. The results presented in this paper are simple, interesting and (potentially) useful.

• 호남수학학술지
• /
• 제38권1호
• /
• pp.25-37
• /
• 2016

In 1972, Andrews derived the basic analogue of Gauss's second summation theorem and Bailey's theorem by implementing basic analogue of Kummer's theorem into identity due to Jackson. Recently Lavoie et.al. derived many results closely related to Kummer's theorem, Gauss's second summation theorem and Bailey's theorem and also Rakha et. al. derive the basic analogues of results closely related Kummer's theorem. The aim of this paper is to derive basic analogues of results closely related Gauss's second summation theorem and Bailey's theorem. Some applications and limiting cases are also considered.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 추계학술발표대회
• /
• pp.3.1-3.1
• /
• 2009

Nanotechnology has beenrapidly evolved from passive nanostructures where nanostructures with steadystructures and functions often used as parts of a product to activenanostructures which change their properties during use. Startingaround 2010, it is anticipated that researchers will cultivate expertise withsystems of nanostructures, directing large numbers of intricate components tospecified needs. One dimensional (1-D) nanostructures suchas nanowires and nanotubes are extremely attractive building blocks for nextgeneration devices because of their high surface to volume ratio and uniquesize dependent properties. In addition, their extremely high aspectratio offers researchers the potentials to build axial or radialheterostructures to integrate multiple functionality from intrinsic propertiesof the material or through interfacial phenomena. Spatialmanipulation and the ability to assemble and position nanostuructures in acontrolled matter so they are registered to define spaces is also a criticalstep toward scalable integration in high density nanodevices. In thispresentation, a generalized template directed electrodeposition with ancillaryassembly, contact will be presented to synthesize axial and radialheterostructures in cost-effective matter and these individual nanostructureswill be applied to spintronics, gas and biological sensors and thermoelectrics.