• KIEE International Transactions on Electrophysics and Applications
• /
• v.11C no.4
• /
• pp.120-126
• /
• 2001

For the past five years, Inha University has been observing the electric fields produced by cloud-to-ground return strokes. This paper presents the summary of most recent results. Statistics on the zero-to-peak rise time, the zero-to-zero crossing time and the amplitude ratio of the second peak in the opposite polarity to the first peak were examined. The radiation electric fields produced by distant cloud-to-ground return strokes were substantially same pattern. The first return stroke field starts with a slowly increasing front and rises abruptly to peak. The rising portions of the electric fields produced by cloud-to-ground return strokes last 1 $mutextrm{s}$ to a few $mutextrm{s}$. The mean values of the zero-to-peak rise times of electric fields were 5.72 $mutextrm{s}$ and 4.12 $mutextrm{s}$ for the positive and the negative cloud-to-ground return strokes, respectively. The mean of the zero-to-zero crossing time for the positive return strokes was 29.48 $mutextrm{s}$ compared with 38.54 $mutextrm{s}$ for the negative return strokes. The depths of the dip after the peak of return stroke electric fields also have the dependence on the polarity of cloud-to-ground return stroke, and the mean values for the positive and negative cloud-to-ground return strokes were 33.55 and 28.19%, respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.5
• /
• pp.320-325
• /
• 2015

This paper dealt with a defect identification algorithm which is based on single partial discharge (PD) pulse analysis in gas insulated structure. Four types of electrode systems such as a needle-plane, a plane-needle, a free particle and a crack inside spacer were fabricated to simulate defects in gas insulated switchgear (GIS). We measured single PD pulse by an oscilloscope with a sampling rate of 5 GS/s and a frequency bandwidth of 1 GHz. Data aquisition and signal processing were controlled by a LabVIEW program. Physical shapes of PD pulses were compared with kurtosis, skewness and time-based parameters as rising time, falling time and pulse-width. These parameters were analysed by an algorithm with a back propagation algorithm (BPA). By applying the algorithm, the identification rate was 97% for the needle-plane electrode, 96% for the plane-needle electrode, 91% for the free particle and 93% for the crack inside spacer. The results verified that the algorithm could identify the type of defects in GIS.

• Clinical and Experimental Reproductive Medicine
• /
• v.44 no.4
• /
• pp.181-186
• /
• 2017

With advances in the methods of cancer treatment used in modern medicine, the number of breast cancer survivors has been consistently rising. As the number of women who wish to become pregnant after being diagnosed with breast cancer increases, it is necessary to consider fertility preservation in these patients. However, medical doctors may be unaware of the importance of fertility preservation among cancer patients because most patients do not share their concerns about fertility with their doctors. Considering the time spent choosing and undergoing treatment, an early referral to a reproductive specialist is the best way to prevent a delay in cancer treatment. Since it is not easy to make decisions on matters related to cancer diagnosis and fertility, patients should be provided with enough time for decision-making, and to allow for this, an early referral will provide patients with sufficient time to choose an appropriate method of fertility preservation. The currently available options of fertility preservation for patients with breast cancer include cryopreservation of embryos, oocytes, and ovarian tissue and gonadotropin-releasing hormone agonist treatment before and during chemotherapy. An appropriate method of fertility preservation must be selected through consultations between individual patients and health professionals and analyses of the pros and cons of different options.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.4
• /
• pp.515-526
• /
• 2014

In this study, the 'preservation of Jeonju Hanok Village Improvement Project' in earnest in promoting itself as the official land price changes in Jeonju Hanok Village and surrounding area thereby affect land prices to some extent in order to identify the time series analysis, t-black dispersion analysis showed the following results were obtained. First, time series analysis, and the Hanok Village, but the average official land price rises, and the area has been stead ilyrising. Second, the time series of the Official price year-over-year change in the average rate of the Hanok Village(+)rising, and the area is a gentle rise sooner or later (+)is expected to be an increase in conversion. Third, the number of tourists visiting Jeonju Hanok Village and sharply increased since 2008, was. Fourth, in order to use local official land price rises in the commercial area of highest priority that requires strategy was analyzed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.1
• /
• pp.133-143
• /
• 2001

This paper describes the correlation of the transient impedance and its parameters with the stationary resistance of a grounding system to a square pulse current and a lightning impulse current. In the experiment, the grounding system consists of a single grounding rod$(\Psi10[mm], 1[m])$and/or a triple-grounding rods of equilateral triangles with 5[m] spacing for operation. To analyze the transient impedance characteristics of the grounding system, a pulse generator which can produce square wave of a 30[ns] rise-time and a $20[\mus] $pulse duration is designed and fabricated. The injected content in the grounding system and the developed potential were recorded, and the time variation of the transient impedance were calculated as the ratio of the potential rising to the injected current at each time. The transient impedance and the effective surge impedance Z3 which defines economic protection level in power system were quite higher than the stationary resistance. The grounding impedance is decreased by the application of the triple-rods grounding system, and its effect is decreased as the frequency of the current is increased due to the inductance of the grounding leads.

• Phonetics and Speech Sciences
• /
• v.7 no.4
• /
• pp.139-145
• /
• 2015

The present study investigates the effects of syllable structure and prosodic prominence on the patterns of tonal alignment and scaling of the phrase-initial rise in Seoul Korean. Two syllable structures (Onset (/#CVC.../ as in minsa) vs. No-onset (/#VC.../ as in insa)) and two prominence conditions (Focus vs. Neutral) were considered. Results showed that the alignment of the L and the H tones in the phrase-initial rise was affected by syllable structure but not by prominence. The time of L was before the vowel onset of the first syllable in the Onset condition (i.e., within the onset consonant) and it was after the vowel onset in the No-onset condition. The difference was attributable to the fact that the initial L was anchored at a fixed distance from the phrase boundary, which was about 30ms after the onset of the syllable in both cases. The time of H was also consistently observed about 20ms after the second vowel onset (i.e., /a/ in minsa/insa). Moreover, the rise time (the duration from the L to the H tones) was longer as the local syllable duration became longer due to different syllable structure and prominence conditions. Taken together, the results provide a support for the segmental anchoring hypothesis, which claims that both the beginning and the end of F0 movement are consistently aligned with segmental 'anchor' points with relatively high stability (Ladd et al., 1999). Results also showed that the scaling of the early rise was slightly influenced by syllable structure but not by prominence. The differences between the results of the current study and a previous study (Cho, 2011) are further discussed.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.3
• /
• pp.135-149
• /
• 2014

Fur clothing as fashion items is expanding into casual & ladies's wear market as well as fur market. The interest of fur fashion is rising. So this study compares and analyzes the merchandising process of textile clothing also it of fur clothing by merchandising steps. Fur clothing has so many change factors at time of purchase by scarcity of raw material, price fluctuation, exchange rate and others. Therefore it is primarily about securing of raw material. As soon as plan of product is finished, the purchase of fur raw material has to be started while progress of design products for commercializing the fur clothing. The design of fur clothing is consist of material design, color design and shape design. And It makes a new trend & market as we are developing new & various treatments. The some of imported materials are transferred to the factory for being treated first dressing, fabric treatments and dyeing processing according to the design. The first treated materials are transferred to the sewing factory again for secondary treatments and finally inspected and shipped. During secondary treatments the fur has gone through various manufacturing process for using like fabric materials and it takes long time because almost work is running manually. Unlike fabric clothing, fur clothing's manufacturing method is complicated and various from material process to shape process as per feature. Therefore the merchandising with fur cannot make mass production also needs detail craftsmanship depending by expert's skills. On this wise the fur clothing takes long time to the completion thus it has been risky and costly.

• Journal of the Korea Furniture Society
• /
• v.23 no.3
• /
• pp.324-331
• /
• 2012

The domestic pine was used to investigate the change of specific gravity, moisture contents, color and anatomical structure by accelerated weathering test (AWT). According to visual inspection, a few knot separation and looseness as well as considerable surface discoloration was found out. However, the crack and split of surface texture have been never occurred till the last step of AWT. On the whole, as the time of accelerated weathering test has increased, the specific gravity has decreased. Finally, after the 9th week of AWT, the specific gravity was 0.38 that reached to 82% compared to the control specimen. In case of moisture content (MC), it showed rising trend in its early stages, however, after 3th week of AWT it have displayed steady state. A deterioration of cell-wall components was not remarkably observed by scanning electron microscope (SEM), however the ray fractures of AWT specimen were observed more than those of control specimen. The full fracture of epithelial cell around resin canal was observed by optical microscope. The fracture of ray of 2th cycle AWT specimen was first, followed by 1th week and control group. A distortion of tracheid for early spring wood and fracture of epithelial cell were generally observed by a similar level, regardless of duration time of AWT. Therefore, it is obvious that increasing duration time of AWT does not affect the deterioration of micro-structure for wood members from this study. Although a considerable change of anatomical properties was not found, there is a need of further research to understand how will the changes of specific gravity and MC on the physical properties of wood member.

• Journal of Navigation and Port Research
• /
• v.33 no.10
• /
• pp.699-702
• /
• 2009

Currently many vessels determine an overhead obstruction by a rule of thumb based on their draft for maritime navigation. Therefore they doesn't have a good overhead obstruction clearance because vertical position of vessels varies on time by tidal. As a result, it is occurred maritime accidents that the mainmast of vessels is bumped against overhead facilities. And disaster by global warming and rising sea levels have increased casualties. So we feel keenly the necessity of warning system for not an earthquake but disaster wave such a tsunami. This paper analyzes a precise GPS ephemeris for maritime precise positioning to solve these problems. The precise GPS ephemeris provided by International GNSS service gives a difficulty to real-time application because of its sample interval. This paper proposes an effective interpolation method for real-time application, and it analyzes an accuracy of precise GPS ephemeris through an interpolation method.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.1
• /
• pp.88-91
• /
• 2010

In this paper, We are composed the position recognition and speed control using the moving robot in the shield Room with a RF Module and Ultrasonic Sensors. Double look up tables are selected a reference value/duty ratio. The moving robot with the dual fuzzy rules which can decrease a Conversion time than basic fuzzy control rules at start point and curve region. Also, a changing times of double look up table are rise at specific points b1,c1,d1 in the e-${\Delta}e$ phase plane and the one of the look up table is used which for increase rising time at transition area, the other used for rapidly conversion to the reference value. We verified that a dual fuzzy control rules get the good response compare with the basic fuzzy control rule.