• 한국정밀공학회지
• /
• 제13권6호
• /
• pp.102-113
• /
• 1996

An experimental and theoretical study on a pneumatic servo system has been conducted using on-off valves and a pneumatic cylinder. A V/I converter has been designed for rapid rising and falling of the solenoid current, which significantly improves the positioning accuracy and settling time of the servo system by shortening the valve opening time. Pulse width modulation was modified to operate on-off valves effectively. A state feedback controller which feeds back position, velocity and acceleration is used to control the system. The influence of controller gains on the system performance is studied to develop a scheme that automatically adjusts the gains using fuzzy logic theory. It is shown experimentally that the proposed fuzzy logic tuner works satisfactorily. A new method for measurements of valve effective areas is proposed, and a partially polytropic model is applied to simulation of the pneumatic system. Simulated results show good agreement with experimental data.

• 한국가시화정보학회지
• /
• 제8권1호
• /
• pp.31-38
• /
• 2010

An experimental study to evaluate dynamic structures of flow and turbulence characteristics in bubble-driven liquid flow in a rectangular tank with a varying flow rate of compressed air is conducted. Liquid flow fields are measured by time-resolved particle image velocimetry (PIV) with fluorescent tracer particles to eliminate diffused reflections, and by an image intensifier to acquire enhanced clean particle images. Instantaneous vector fields are investigated by using the two frame cross-correlation function and bad vectors are eliminated by magnitude difference technique. By proper orthogonal decomposition (POD) analysis, the energy distributions of spatial and temporal modes are acquired. When Reynolds number increases, bubble-induced turbulent motion becomes dominant rather than the recirculating flow near the side wall. The total kinetic energy transferred to the liquid from the rising bubbles shows a nonlinear relation regarding the energy input because of the interaction between bubbles and free surface.

• 천문학회보
• /
• 제36권2호
• /
• pp.138.2-138.2
• /
• 2011

Astronomical data such as calendar day and time of rising/setting of the sun and onset of twilight are essential in our daily lives. Knowing the calendar day of the past is particularly crucial for studying the history of a clan or a nation. To verify previous studies on the calendar day of the Joseon dynasty (1392 - 1910), we also investigated the sexagenary cycle of the new moon day (i.e., the first day in a lunar month) using different sources: results of the calculation by the Datong calendar (a Chinese Calendar of the Ming Dynasty) and data of Baekjungryeok (a Perpetual Calendar - literally, a one hundred-year almanac). Compared with the study of Ahn et al., we have found that as many as 17 sexagenary cycles show discrepancies. In the case of nine discrepancies, we found that the sexagenary cycles of this study are identical to those of the almanacs at that time. In addition, we study six sexagenary cycles by using the historical accounts of Joseon Wangjo Sillok (Annals of the Joseon Dynasty), Seungjeongwon Ilgi (Daily Records of Royal Secretariat), Chungung Ilgi (Logs of Crown Prince), and so forth. We present historical materials supporting the results of this study for the remainder. In conclusion, we think that this study will greatly contribute to the comparison between luni-solar calendar days during the Joseon dynasty and those in the modern (i.e., Gregorian) calendar.

• Journal of Welding and Joining
• /
• 제32권2호
• /
• pp.70-75
• /
• 2014

In automotive industry, applying of Mg alloy to autobody has been issued recently as a light metal. But poor resistance spot weldability of Mg alloy is blocking commercialization. So studies on improving resistance spot weldability of Mg alloy is increasing continuously. For reduce loss of heat input during welding, inverter DC power source is considered because of short rise time to target welding current. But rapid rising of welding current can increase temperature rapidly in nugget and oxide film between electrode and base metal, and that causes generating expulsion on low welding current range. In this study, for increase optimum welding current range and prevent generating expulsion, applicate various types of welding current waveform controls during resistance spot welding. For analysis effects of each current waveform control, acceptable welding current regions according to electrode force and welding time is determined and lobe diagram is derived. In result, pre heat is proposed as optimum type of welding current waveform control.

• 한국전자파학회논문지
• /
• 제26권12호
• /
• pp.1100-1107
• /
• 2015

미상의 레이더에서 방사하는 전자파를 수신하여 신호를 처리한 후, 레이더의 변조방식을 식별하는 일은 전자전에서 매우 핵심 과제이다. 본 논문에서는 최근 전자전 보호능력이 우수한 Wobble PRI 방식과 Sinusoidal PRI 변조방식을 자동식별하는 알고리즘을 DTOA(Difference Time Of Arrival)을 적용하여 개발하였다. 안테나로 입력되는 레이더 펄스의 PRI를 산출하고, 산출된 PRI의 각 값으로부터 시간차의 특성을 산출하여 알고리즘을 개발하였다. 알고리즘을 프로그래밍한 후 각각 40개의 표본 PRI데이터를 입력하여 처리한 결과, 모두 정확히 PRI 변조방식을 식별하였다. 개발된 알고리즘은 향후 ESM장비 또는 ELINT 장비에 적용 가능할 것으로 판단한다.

• 전기학회논문지
• /
• 제64권3호
• /
• pp.399-404
• /
• 2015

This paper presents the DC voltage control method in DC link of High Voltage Direct Current(HVDC) for an offshore wind farm in Low Voltage Ride Through(LVRT) situation. Wind generators in an offshore wind farm are connected to onshore network via HVDC transmission. Due to LVRT control of grid side inverter in HVDC, power imbalancing in DC link is generated and this consequentially causes rising of DC voltage. A de-loading scheme is one of the method to protect the wind power system DC link capacitors from over voltage. But the flaw of this method is slow control response time and that it needs long recovery time to pre-fault condition after fault clear. Thus, this paper proposes improved de-loading method and we analyze control performance for DC voltage in LVRT control of HVDC for an offshore wind farm.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2004년도 추계학술발표대회 논문집
• /
• pp.98-101
• /
• 2004

A new kind of tide is rising in the area of architecture nowadays, and the young architects throughout the world are making their move here and there. This acquires a new trend in viewing new kinds of constructions. Following study is to analyze relationship between abstract arts and the formative characteristics of contemporary architecture. Architecture, as with pictures and sculptures, are traditionally in the category of art. The flow of pictures that had mostly given influence to modern architecture should be cubist and futurist of early 20C. Although cubists had given much importance to shape itself and futurists had given much thoughts to conceptual basis, which is mind of the century and flow of cultural aspects, these two movements had risen at almost the same time and have established two of most famous views of avante-garde, which is geometrical abstraction and mechanical beautism. These characteristics of abstraction arts had given much influence to modern architecture in point of shape both in and out and had become the reason of searching for the new style of architecture which could represent the culture and minds of the time.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 춘계학술대회
• /
• pp.612-613
• /
• 2016

오늘날 여성이나 어린이를 보호하기 위한 다양한 시스템들이 개발되고 있다. 그러나 여전히 그린 존 내의 범죄율이 상승하고 있으며 이를 보호하기 위한 시스템의 필요성이 부각되고 있다. 본 논문에서는 등록된 범죄자가 그린존 지역에 접근 시 그린존 관리자에게 실시간으로 메시지를 전달하는 시스템을 제안한다. 이는 기존 시스템이 모니터링을 통해 수동적으로 데이터를 전송하는 것과 달리 제안하는 시스템은 설정된 그린존 접근 시 이를 GPS 기반으로 감지한다. 이에 따라 등록된 대상을 실시간으로 감시하고 관리할 수 있어 범죄자들로부터 여성과 어린이를 보호할 수 있을 것으로 판단된다.

• Bulletin of the Korean Chemical Society
• /
• 제34권2호
• /
• pp.569-573
• /
• 2013

In this study, activated carbon fabric was prepared from a cellulose-based polymer (viscose rayon) via a combination of physical and chemical activation (mixed activation) processes by means of $CO_2$ as a gasifying agent and surface and adsorption properties were evaluated. Experiments were performed to investigate the consequence of activation temperature (750, 800, 850 and $925^{\circ}C$), activation time (15, 30, 45 and 60 minutes) and $CO_2$ flow rate (100, 200, 300 and 400 mL/min) on the surface and adsorption properties of ACF. The nitrogen adsorption isotherm at 77 K was measured and used for the determination of surface area, total pore volume, micropore volume, mesopore volume and pore size distribution using BET, t-plot, DR, BJH and DFT methods, respectively. It was observed that BET surface area and TPV increase with rising activation temperature and time due to the formation of new pores and the alteration of micropores into mesopores. It was also found that activation temperature dominantly affects the surface properties of ACF. The adsorption of iodine and $CCl_4$ onto ACF was investigated and both were found to correlate with surface area.

• 천문학회보
• /
• 제37권2호
• /
• pp.78.1-78.1
• /
• 2012

We have studied the physical properties of X-ray point sources in galaxy clusters using ~600 Chandra archival observations. The goal of this study is to investigate the density environmental effects on the physical properties of X-ray point sources by comparing the properties of X-ray point sources in galaxy clusters to those in typical blank fields. In this presentation, we show the nature of X-ray point sources which are expected to be related with galaxy clusters with different core properties. Using ~60 galaxy clusters observed with Chandra, we investigate the physical properties of X-ray point sources in cool-core and non-cool-core clusters. The cool-core clusters are known to have short central cooling time, and are characterized by low central entropy, systematic central temperature drops, and a brightest cluster galaxy at the X-ray peak. While the non-cool-core clusters have longer central cooling time, and are characterized by large central entropies and flat or centrally rising temperature profile. We show that how central core properties of galaxy clusters affect on the physical properties of X-ray point sources.