• Transactions of Materials Processing
• /
• v.27 no.3
• /
• pp.165-170
• /
• 2018

In order to increase the lifetimes of cold forging dies, insert rings are generally used. In this study, an insert ring and shrunk ring of the flange upsetting die were designed for the cold forging of an automotive wheel nut. The Stress distribution occurring in the die during forging was simulated using a commercial finite element analyzing program. The effects of the fitting interference and inclined angle of the insert ring on the compressive stress of the die inside were also investigated. The simulated data were compared with the real lifetimes of the forging dies. The maximum compressive stress acting on the edge of a forging die should have the most influence on die lifetime, an idea which could help develop the die design with the longest lifetime. The design of the most optimal forging die with the longest lifetime is made possible by analyzing the maximum inner pressure and principal stress between the shrunk ring and insert ring.

• Design & Manufacturing
• /
• v.11 no.3
• /
• pp.46-50
• /
• 2017

Press processing is one of the best machining methods capable of mass production, satisfying dimensional, shape and quality among the methods of processing a metal plate. Among them, Fine blanking is a method of obtaining a precise cross-section such as machining of the shear surface shape. In this research, Using SCP-1 and SHP-1 materials. The deformation behaviors of the material flow affecting the die height of the shear section in accordance with the position of the V-ring in the Fine blanking were compared and analyzed. Result of interpretation, It was confirmed that the force acts on the position where the material flow direction accurately forms the die roll that the material of SCP-1 is at a position of 1.5 mm and the material of SHP-1 is at 2.0 mm. As a result, it was confirmed that the state of fo1111ing the shear surface by the V-ring was excellent. Using analysis results, In the experiment, the height of the die roll was considered by applying The position of the V-ring was 1.5 mm in SCP-1 and 2.0 mm in SHP-1. As a result of comparing the height of the die rolls, the height values of the die rolls were different from each other, It has been considered that the tendency of the die rolls to coincide with each other. It is considered that the difference of the die roll height is caused by the pressure input of the V-ring. In this study, the deformation behavior of the material(In addition to the position of the V-ring, the flow direction of the material depends on the shape of the V-ring and the Indentation amount) is considered to be an important factor in determining die roll height.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.12
• /
• pp.145-151
• /
• 2001

The dimensional accuracy of the cold forged part is depended on the elastic characteristics of the die. To increase the stiffness of the prestressed die, the first stress ring of the tungsten carbide alloy (WC) is considered. For the design, Lame's equation is used. Diameter ratios and interferences have been determinated by maximum inner pressure without yielding of materials. The design of the prestressed die has been compared with the conventional one. For the comparison, the FE-analysis using ANSYS has been performed. The results indicate that the prestressed die with the high stiffness can be obtained by the using the high stiffness material as the first stress ring.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.2009-2014
• /
• 2012

It is very important to minimize the die roll height of gear, in order to maximize the shear cutting surface(tooth surface) of fine blanking. In this paper, the fine blanking tool sets were manufactured in order to study the die roll height according to V-ring position and die chamfer shape. They were constituted of the various die inserts and guide plate inserts with different die chamfer shape and different V-ring distance. The fine blanking experiment was conducted with the fine blanking tool sets and the die roll height of the gear samples was measured. It should be noted that die roll height on the fine blanked gear increased with increasing the V-ring distance and die chamfer angle.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1476-1479
• /
• 1996

The ring rolling process is one of the best known ring production method. The present model based control system was designed for rings with rectangle cross-section yet. An Adaptive Fuzzy Control for Closed-Die Ring-Rolling was developed in order to enhance the flexibility of the radial-axial ring rolling machine and to produce the rings with highly complex cross-section profile, roller bearing rings. A fuzzy method was implemented because of its simple application and to utilize the known process knowledge. The quality of the control system was estimated by die filling grad, which is strong dependent on the rising time of the controller. The rolling process parameters were also varied to determine their influence on filling of the ring profile. Die filling met the requirement of the industry.

• Transactions of Materials Processing
• /
• v.11 no.4
• /
• pp.363-370
• /
• 2002

In this study, an optimal design technique was investigated for determining appropriate dimensions of components of the die set used in the extrusion process. For this, an axi-symmetric elastic finite element program for the analysis of deformation of the shrink fitted die set was developed with the Lagrange multiplier method to implement the constraint condition of shrink fit of stress ring. By coupling the rigid-viscoplastic analysis of extrusion process by CAMPform and elastic analysis of the die set, the optimization study was made by employing optimization program DOT. Considering the various assembly conditions, optimal design was determined for a single stress ring case. It is construed that the proposed design method can be beneficial for improving the tool life of cold extrusion die set at practice.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.377-380
• /
• 2000

The dimensional accuracy of the cold forged part is depended on the elastic characteristics of the die. To obtain the high stiffness of the prestressed die, the first stress ring of the tungsten carbide material is considered. For the design, Lam 's equation is used. The design of the prestressed die has been compared with the conventional that. For the comparison, the FE-analysis using ANSYS has been performed. The results indicate that the prestressed die with the high stiffness can be obtained by the using the high stiffness material as the first stress ring.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.6
• /
• pp.114-122
• /
• 1999

By using the FEM, a method for the stress analysis of the presented dies has been proposed. In this method, FEM and Lame equation are used for the analysis of the die insert and the stress ring, respectively. The proposed method includes the calculation of the contact pressure between the die insert and the stress ring. To show the validity, the proposed method has been applied to the simple test problem. The results of the stress analysis have been compared with the results of ANSYS, a commercial FE-code. Cold extrusion has been simulated by using the rigid-plastic FEM and the results of the deformation analysis have been used as the input of the die structure analysis. The stress states of the prestressed extrusion die have been obtained. The stress analysis of the die insert with stress rings has also been performed during extrusion.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6060-6065
• /
• 2013

Minimizing the height of the die roll is very important for maximizing the size of effective shear planes. In this study, the die roll change was investigated for the change in the amounts and clearance of the V-ring indentation. Shear analysis and experiments were conducted with the V-ring distance fixed to 2mm. Fine blanking die was applied to the die insert with different clearances. Several specimens were analyzed about the height of the die roll. As a result, the pressure of V-ring effectively inhibited the flow of materials. And the height of the die roll was lowest when the clearance between the die and punch was 1% of the material thickness.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.3
• /
• pp.40-46
• /
• 2001

An integrated analysis for the thermo-elastic deformation, fatigue, wear and brittle damage evolution of the shrink-fitted die with multi stress-ring of dissimilar materials is presented. A simple numerical algorithm for the moving elastic boundaries characterizing the contacts of the insert and multi stress-rings is presented. The initial stress distribution in the die due to shrink-fit is considered and the traction at the die surface contacting with the work piece is obtained by analyzing the elasto-plastic deformation of work piece. Elastic analysis of the separate-type die is performed and then the evolution of brittle damage, wear and fatigue life are predicted. This integrated analysis is applied to the extrusion die with two layers of stress-rings and the results are discussed in detail.