References
- K.Mori, K.Nakadoi and M.Fukuda, 'Coupled analysis of steady state forming process with elastic tools,' Proc. NUMIFORM '86 Conf., Gothenburg, pp. 237-242, 1986
- H.Rystad and C.R.Boer, 'Forging of an axisymmetrical shape Modelling of meterial flow, die loads and die stresses using FEM,' Proc. NUMIFORM '86 Conf., Gothenburg, pp. 283-286, 1986
- J.H.Yoon, N.K.Lee, D.Y.Yang, 'Treatment of contact traction at the die-workpiece interface for the elastic analysis of die deformation,' Int. J. Mech. Sci. Vol. 34, No.9, pp. 689-702, 1992 https://doi.org/10.1016/0020-7403(92)90002-X
- D.Krajcinovic, G.U.Fonseka, 'The Continuous Damage Theory of Brittle Materials-Part 1,2,' ASME Journal of Applied Mechanics, Vol. 48, pp. 809-815 and pp. 816-824, 1981
- D.Krajcinovic, G.U.Fonseka, 'The Continuous Damage Theory of Brittle Materials-Part 1,2,' ASME Journal of Applied Mechanics, Vol. 48, pp. 809-815 and pp. 816-824, 1981
- 여은구, 유헌일, 이용신, '금형의 취성결함성장에 관한 연구', 대한기계학회, 제22권 제10호, pp. 1866-1873, 1998
- 신중호, 손주리, '분말압축성형용 단일보강링 금형의 최적설계', 한국기계연구소, 제17집, pp. 75-82, 1987
- R.C.Juvinall, 'Stress,Strain, and Strength,' McGraw-Hill Book Comp., N.Y., N.Y., 1967
- H.D.Kuhn, 'Optimum Die Design for Powder Compaction,' Intemation Journal of Powdr Metallogy & Powder Technology, Vol. 14, pp. 259-275, 1978
- J.F.Archard, 'Contacts and rubbing of flat surfaces, ' J. of Appl. Phys., Vol. 24, pp. 981-988, 1953 https://doi.org/10.1063/1.1721448
- 김병민, 조해용, 김태형, '온도상승을 고려한 인발금형의 마모해석', 한국정밀공학회지, 제13권, pp. 116-122, 1996
- M.A.Miner, 'Cumulative Damage in Fatigue,' Trans. ASME, J. Appl. Mech., 67, A159, 1945
- 송영철, 여은구, 이용신, '금형의 피로수명예측에 관한 연구', 한국공작기계학회, 제8권 제4호, pp. 87-92, 1999