• Structural Engineering and Mechanics
• /
• v.22 no.3
• /
• pp.293-310
• /
• 2006

In seismic prone areas it is possible to meet very different objects (equipment components, on shelf artefacts, simple architectural elements) that can be modelled as a rigid body rocking on a rigid foundation. The interest in their behaviour can have different reasons: seismological, in order to estimate the ground motion intensity, or more strictly mechanical, in order to limit the response severity and to avoid overturning. The behaviour of many rigid bodies subjected to twenty wide ranging acceleration recordings is studied here. The response of the blocks is described using kinematic and energy parameters. A condition under which a so called scale effect is tangible is highlighted. The capacity of the signals to produce overturning is compared to different ground motion parameters, and a good correlation with the Peak Ground Velocity is unveiled.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.2 s.152
• /
• pp.166-173
• /
• 2007

Collision analysis problems between ship to ship can be generally classified into the external mechanics(outer dynamics) and internal mechanics(inner dynamics). The former can be also dealt with the concept of fluid-structure interaction and the use of rigid body dynamic program, depending on the ways handling the hydrodynamic pressure due to surrounding water. In this study, full scale ship collision simulation was carried out, such as a DWT 75,000 ton striking ship collided at right angle to the middle of a DWT 150,000 struck ship with 10 knots velocity, coupling MCOL, a rigid body mechanics program for modeling the dynamics of ships, to hydrocode LS-DYNA. It could be confirmed that more suitable damage estimation would be performed in the case of the collision simulations with consideration of surrounding water through the comparison with the collision simulation results of fixed struck ships without it. Through this study, the opportunity could be obtained to establish a more effective ship collision simulation technique between ship to ship.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.5
• /
• pp.687-696
• /
• 2019

To identify the driving dynamic characteristics of the Tractor-Trailer Type Transporter for mounting a large scale precision equipment, real vehicle driving tests on the 3 inch-bump-space-road were performed. And using general Dynamics Analysis Program - RecurDyn(V8R5), Dynamics M&S were carried out assuming the similar condition with real tests. Then the acceleration data obtained from real tests and M&S were analyzed and compared with each other in the part of root-mean-square-acceleration($g_{rms}$), peak-acceleration($g_{peak}$) and frequencies. In simple view of the $g_{rms}$ & $g_{peak}$, although the results of MRBD are more similar to ones of the real vehicle driving tests, but the results of RFlex have more information to get various useful dynamic characteristics.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.5
• /
• pp.691-696
• /
• 2012

In this study, a rigid multi-body dynamic model has been developed for mechatronic analysis to evaluate dynamic behavior of a machine tool. The development environment was the commercialized analysis tool, ADAMS, for rigid multi-body dynamic analysis. A simplified servo control logic was implemented in the tool using its functions in order to negate any external tool of control definition. The advantage of the internal implementation includes convenience of the analysis process by saving time and efforts. Application of this development to a machine tool helps to evaluate its dynamic behavior against feeding its component, to calculate the motor torque, and to optimize parameters of the control logic.

• Journal of KSNVE
• /
• v.3 no.1
• /
• pp.65-75
• /
• 1993

In this study, we identify the structural dynamic characteristics of the rigid body suspension system of waching machine containing rotating system, and consider the methods for the reduction of noise and vibration due to the structural problems. The structural dynamic characteristics of the suspension system have been studied by the computer simulation, in which the commercial software package, "DYMES(Dynamics of Mechanical System)" is used. The behaviour of the supporter by the rotating system has been parametrically studied by computer simulation, and the force and torque which are transferred to the fixed body through the suspension bar also has been calculated. The possibility to decide the position and the stability of the rigid body suspension system for waching machine is demonstrated based on various simulation results.n results.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.174-177
• /
• 2008

In 3D gaming environment, it is important to simulate the physically plausible behaviors of gaming objects in real time. In particular, rigid body dynamics consists in the heart of most game physics. In this paper, we present a constraint-based rigid body simulation method using continuous collision detection as a collision detection method, and LCP formulation as a collision response method. The continuous collision detection method never misses any collisions and thus is able to accurately report the first time of collision as well as its associated colliding features. Moreover, since the number of colliding features is typically low, it also reduces the complexity in the LCP formulation.

• International Journal of Aeronautical and Space Sciences
• /
• v.2 no.2
• /
• pp.1-18
• /
• 2001

A numerical technique for simulating the separation dynamics of strap-on boosters jettisoned in the dense atmosphere is presented. Six degree of freedom rigid body equations of motion are integrated into the three-dimensional unsteady Navier-Stokes solution procedure to determine the dynamic motions of strap-ons. An automated Chimera overlaid grid technique is introduced to achieve maximum efficiency for multi-body dynamic motion and a domain division technique is implemented in order to reduce the computational cost required to find interpolation points in the Chimera grids. The flow solver is validated by comparing the computed results around the Titan IV launch vehicle with experimental data. The complete analysis process is then applied to the. H-II launch vehicle, the central rocket in japans space program, the CZ-3C launch vehicle developed in China and the KSR-III, a three-stage sounding rocket being developed in Korea. From the analyses, separation trajectories of strap-on boosters are predicted and aerodynamic characteristics around the vehicles at every time interval are examined. In addition, separation-impulse devices generally introduced for safe separation of strap-ons are properly modeled in the present paper and the jettisoning force requirements are examined quantitatively.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.436-441
• /
• 2001

In this paper, stacker crane is modeled as rigid elements and discrete flexible beam connections by kinematics & dynamics solver package program instead of deriving the equations of motion which describes the total dynamics of the system. For the simulation of structural dynamics, ADAMS, a software for the simulation of multiple rigid body dynamics, is used. Some kinds of works are fulfilled to examine the dynamic characteristics of system. In order to verify the analysis method, the results of simulation and experiment are compared.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.8
• /
• pp.108-114
• /
• 1997

A simple and efficient method is presented for the dynamics of interconnected flexible beams having large rigid body rotations. A simple mass matrix is obtained by interpolating the displacements in the global inertia frame, and the elastic force is also simply computed by using linear finite element technique with the moving frame attached to the beam. For the beams connected by revolute joints, kinematic constraints and relative rotations between the beans are not required and the equations of motions are time integrated by a simple ODE technique. Numerical simulations are conducted to demonstrate the accuracy and efficiency of the present technique.

• 한국HCI학회:학술대회논문집
• /
• 2007.02c
• /
• pp.326-333
• /
• 2007

To simulate solid dynamics,a we must com-pute the mass, the center of mass, and the products of inertia about the axes of the body of interest. These mass property computations must be continuously re-peated for certain simulations with rigid bodies or as the shape of the body changes. We introduce a GPU-friendly algorithm to approximate the mass properties for an arbitrarily shaped body. Our algorithm converts the necessary volume integrals into surface integrals on a projected plane. It then maps the plane into a frame-buffer in order to perform the surface integrals rapidly on the GPU. To deal with non-convex shapes, we use a depth-peeling algorithm. Our approach is image-based; hence, it is not restricted by the mathematical or geometric representation of the body, which means that it can efficiently compute the mass properties of any object that can be rendered on the graphics hardware. We compare the speed and accuracy of our algorithm with an analytic algorithm, and demonstrate it in a hydrostatic buoyancy simulation for real-time applications, such as interactive games.