• 대한교통학회지
• /
• 제28권1호
• /
• pp.97-105
• /
• 2010

교차로에서 신호시간 변경 시 교차로를 벗어나지 못한 차량과 대향 차량, 교차로 횡단보도의 보행자(자전거)와의 충돌을 피하기 위하여 황색신호와 별도로 전전색신호를 운영하고 있다. 외국은 전적색신호 운영이 교통사고에 미치는 영향을 분석해 오고 있다. 반면 국내의 경우에는 이와 같은 유사한 연구가 미흡한 실정이다. 본 연구에서는 국내에서 운영되는 전적색신호가 교통사고에 어떠한 영향을 미치는 지를 가설검정 통하여 평가하였다. 전적색신호를 도입한 교차로 10개소에 대하여 전 후 사고율을 분석하였다. 95% 유의 수준에서 비모수 검정을 실시한 결과 전적색신호의 도입은 교차로 안전성을 향상시키는 것으로 분석되었다. 이는 전적색신호가 신호변경 중에 교차로에 남아 있는 차량의 정리와 미리 진입하는 차량을 통제함으로써 교차로내의 직각충돌사고를 감소시켰기 때문으로 분석된다.

• 한국임상수의학회지
• /
• 제29권1호
• /
• pp.112-117
• /
• 2012

This report evaluated the convenience and accessibility of a penile translocation surgery in the lateral recumbency of a calf using a tilt-up mobile compared with that of dorsal recumbency on the ground of a barn. One nine-month-old F-1 (Korean native sire x Holstein dam) calf was sedated with xylazine (0.03 mg/kg, IV) and restrained in the right lateral recumbency position on a tilt-up restraint mobile (90 cm high), whereas the other nine-month-old Korean native calf was administered xylazine (0.3 mg/kg, IV) and restrained in dorsal recumbency position on the ground of a barn, with assistance by one person. For the two calves, lidocaine was administered subcutaneously from the preputial orifice to the S-shaped penis. The preputial orifice was incised, and the preputial sheath and penis were separated bluntly, then laterally translocated to the site toward the left flank at a $40^{\circ}$ angle. Anti-inflammatory drug (ketoprofen) and antibiotics (penicillin) were administered following the surgery. The duration of surgery was 30 min shorter in the calf that received the surgery in lateral recumbency using the tilt-up mobile with operator's standing posture (60 min) than the one that underwent surgery in dorsal recumbency on the ground with operator's bending posture (90 min). One week after the surgery, the operation area, including the translocated preputial orifice, was healed without complications in both cases. The results detailed in this report demonstrate that penile translocation surgery in the lateral recumbency position using a tilt-up mobile might be used conveniently in calves due to the convenience of restraint, reduced surgery time, and reduced physical inconvenience for the surgeon.

• Journal of Chest Surgery
• /
• 제30권12호
• /
• pp.1247-1250
• /
• 1997

7년전 누두흉으로 Ravitch수술을 받은 13세 남아가 이차성 전흉벽기형과 운동시 호흡곤란(NYHA II)을 주소로 내원하였다. 술전 심초음파상 이차성 심방중격결손이 진단되었고, 폐기능검사상 WC가 2.03 L(72%), FEVI이 1.82 L(71%)로 감소된 것외에는 술전 검사상 이상소견은 없었다. 수술은 앙와위에서 흉골을 보존한 채 정 중흉절개를 통해 흉근판을 만든후 기형늑연골 잔유물과 섬유조직을 제거하여 이차성 전흉벽기형을 교정한 후 흉골을 90$^{\circ}$로 세움으로써 개심술을 위한 시야를 확보하여 심방중격결손을 동시에 교정하였다. 술후 1일째 급성호흡부전이 있어 기관내 재삽관 및 기계호흡을 시행하였고 술후 6일째 인공호흡기를 제거하였다. 환아는 합병증없이 회복되어 술후 19일째 퇴원하였다.

• 대한물리의학회지
• /
• 제6권2호
• /
• pp.235-246
• /
• 2011

Purpose: The aim of this study is to compare and assess the effects of lumbar stabilization exercise on the balance ability of young college studets with low back pain after having performed spinal stabilization exercise by using 3-dimensional air-balance system and gym ball. Methods: The subjects of this study were 34 low back patients in their early twenties. They were divided into two groups: 3-dimensional lumbar stabilization exercise group(N=17) and gym ball lumbar stabilization exercise group(N=17). The period of the intervention was for five weeks. VAS(Visual Analogue Scale) for pain test, ODI(Oswestry Disability Index) for ADL limitation test, Tetrax system for static balance test, and Air-balance system 3D for dynamic balance test were used as evaluation tools for this study. Results: Pain showed significant decrease in both groups after having performed the experiment, but ADL limitation of the groups did not show any remarkable difference between before and after the experiment. Dynamic balance ability in the 8-directional angle comparison test significantly increased in all directions except for the backward, left-backward, and right-backward directions. As for dynamic balance ability in the 8-directional postural test, 3D exercise group showed statistically significant reduction in every direction while gym ball exercise group did not(p<.05). However, when it comes to static balance ability in the weight distribution and stability test, there was not significantly change between pre and post test in both groups. Conclusion: This study shows 3-dimensional lumbar stabilization exercise is more effective in the lumbar stabilization of coordinated movement than gym ball exercise, which may imply that 3D air-balance system can be used for the therapeutic treatment of body imbalance for patients with low back pain.

• 한국산학기술학회논문지
• /
• 제16권8호
• /
• pp.5296-5303
• /
• 2015

본 연구의 목적은 플렉시-바 운동이 유소년 축구선수의 자세와 균형 변화에 미치는 효과를 알아보고자 실시하였다. 연구대상은 10대 유소년 축구선수로 운동군 10명, 대조군 10명으로 나누어 운동군에 플렉시-바 운동을 8주간 주3회 일일 30분 실시하여 연구대상자들의 운동 전 후와 연구군 사이의 자세정렬과 균형의 차이를 분석하였다. 연구전 측정 시 연구대상자들은 전반적인 자세정렬의 비대칭과 균형이 오른쪽과 뒤쪽으로 치우친 특징을 보였다. 연구결과, 운동군은 양쪽 어깨, 어깨뼈, 골반, 손의 각도와 높낮이 차이(p<.05)가 통계적으로 유의하게 개선되었지만, 대조군에서는 유의한 변화가 없었다. 균형의 변화는 운동군에서 눈을 뜬 상태의 이동거리가 통계적으로 유의하게 감소하였다(p<.05). 본 연구를 통해 플렉시-바 운동이 유소년 축구선수의 자세와 균형 개선에 효과적인 운동프로그램이 될 수 있음을 확인하였다.

• 한국의류학회지
• /
• 제40권4호
• /
• pp.641-649
• /
• 2016

Highly precision body measurements represent basic data required by industry and researches who wish to utilize information about the human body. The proficiency and expertise of the measurers have a significant influence on the error and accuracy of data when various parts from multiple subjects' bodies are measured. Therefore, in order to measure accurate body measurements (when measuring bodies directly), it is necessary to conduct objective analyses on errors. This study calculated the Relative Technical Error of Measurement (%TEM) using data that measured each of 24 subjects and discussed errors and methods to reduce errors by conducting comparison analysis based on measured items and objects. The result of analysis indicated that the errors based on age and gender of the objects of measurement were minor; however, there were comparatively distinct differences in measured errors based on measured items. 'Right and left Shoulder Angle' for all measured subjects displayed the greatest errors and standard deviations. 'Height' dimension, Lateral Malleolus Height and Head Height had big errors; in addition, 'Circumference', Neck Base Circumference and Armscye Circumference also had big errors. More careful measurements of such items with big errors require additional educational plan such as a proposal for more objective and detailed measurement methods. Items with small errors but big standard deviations such as Waist Circumference, Calf Circumference, Minimum Leg Circumference, Chest Circumference, Hip Circumference and Waist Circumference confirmed that errors for them greatly decreased with repeated experiments and resultant measurers increased proficiency; consequently, repeated measuring experiments for these items greatly enhance accuracy.

• Journal of Biosystems Engineering
• /
• 제42권2호
• /
• pp.80-85
• /
• 2017

Purpose: In this study, we attempted to analyze, by using a high-speed camera, the cutting shape as a function of cutting speed and feed rate. We compared the differences in cutting shape between domestic and foreign combines. Methods: Experiments were performed using plastic straws, and the results of two combine cutting blades, one from the Daedong Industry and one from Kuboda, were compared. The quality and performances of cutting were measured at three cutting positions: center and 68 cm to the left and right of the center. The feed rates were 0.6 m/s, 1.1 m/s, 1.6 m/s, and the cutting speeds were 600 RPM, 990 RPM, 1,380 RPM. For each speed, the cutting shape was measured three times, and the entire procedure was also repeated three times. Results: In the experiments, the domestic cutting blade achieved better results than the Japanese cutting blade. These results were obtained by studying the combination of feed rate and cutting speed, with the domestic combine attaining approximately 80% performance of the Japanese combine. We believe that additional data analysis is required, obtained from field experiments. Conclusions: The domestic cutting knives achieved better results than the Japanese cutting knives. These results are estimated from experiments conducted with different feed rates and cutting speeds; an in-depth analysis will require experiments in the real field with actual combines and a combination of multiple variables. Repeating the investigation on the length differences, broken and cut angle with various combinations of feed rate and cutting speed, will surely help to find the optimal cutting speed.

• 한국지반환경공학회 논문집
• /
• 제4권1호
• /
• pp.49-58
• /
• 2003

본 연구에서는 불포화토 지반에 있어 모관흡수력이 지반의 거동특성에 중요한 설계변수이므로, 충청도권의 화강풍화토 지반을 대상으로 함수특성곡선을 제시하고, 입도분포곡선과 함수특성곡선과의 관계를 통하여 함수특성곡선의 추정가능성을 제시하고자 한다. 충청권의 화강풍화토 12군데의 시료를 채취하여 입도별로 분류하고, 불포화토의 경험식에 있어서 a, n, m 계수값이 함수특성을 좌우하는 주요한 변수임을 감안하여 입도분포곡선의 시작점, 기울기 및 세립분의 양에 따라 시료를 재성형하였다. 함수특성시험결과 함수비와 흡수력의 변화는 입도분포곡선의 좌우 위치와 기울기, 세립분의 양에 대한 영향이 큰 것으로 나타나 세립분의 함유량과 입도분포에 따른 상관성을 보여주었고, 매개변수 a, n, m은 불포화 화강풍화토의 설계변수로서 기초자료가 될 것이다.

• The Journal of Advanced Prosthodontics
• /
• 제8권6호
• /
• pp.472-478
• /
• 2016

PURPOSE. The aim of this study was to analyze the shapes of lingual polished surfaces in lower complete dentures formed by polished surface impressions and to provide reference data for use when manufacturing edentulous trays and lower complete dentures. MATERIALS AND METHODS. Twenty-six patients with mandibular edentulism were studied. After lower wax dentures were fabricated, wax was removed from the lingual side of the wax denture and a lingual polished surface impression was obtained with tissue conditioner. The definitive denture was scanned with a three-dimensional scanner, and scanned images were obtained. At the cross-sections of the lingual frenum, lateral incisors, first premolars, first molars, and anterior border of the retromolar pads, three points were marked and eight measurements were taken. The Kruskal-Wallis test and a post hoc analysis with the Mann-Whitney test were performed. RESULTS. Each patient showed similar values for the same areas on the left and right sides without a statistically significant difference. The height of the contour of the lingual polished surface at the lingual frenum was halfway between the occlusal plane and lingual border, it moved gradually in a downward direction. The angle from the occlusal plane to the height of the contour of the lingual polished surface was increased as it progressed from the lingual frenum towards the retromolar pads. CONCLUSION. The shape of the mandibular lingual polished surface was convex at the lingual frenum, lateral incisors and gradually flattened towards the first molars and retromolar pads.

• 한국어류학회지
• /
• 제32권3호
• /
• pp.136-142
• /
• 2020

이 연구는 투라치의 형태 및 골격 관찰을 위해 2017년에 여수시 돌산도와 부산에서 채집한 3개체를 대상으로 외부형태를 관찰하고 내부 골격을 삶아 채골하여 관찰하였다. 형태적 특징은 다음과 같다. 몸은 길고 측편되어 있었고, 위턱은 앞으로 돌출됐다. 체색은 은백색을 띠고 있었고, 눈은 크며, 가슴지느러미와 꼬리지느러미는 등쪽으로 향해 있었다. 작은 돌기들이 배쪽에 머리 뒤부터 꼬리까지 있었다. 새파 수는 (3~4)+(7~8)개였다. 등지느러미 줄기는 185~190개였고, 가슴지느러미는 12~13개, 꼬리지느러미에는 9개의 연조와, 5+2개의 짧은 극조가 있었다. 골격 특징은 다음과 같다. 주상악골은 길고 4개의 이빨이 있었다. 치골은 삼각형 모양이었고, 간새개골과 하새개골은 크고 넓었으며, 5개의 새조골이 있었다. 후쇄골은 가늘고 길게 발달 되어있었다. 척추골은 79~80개였고, 후방 추골은 길었으며, 미부봉상골에는 5~6개의 돌기가 있었다.