• Animal Systematics, Evolution and Diversity
• /
• 제24권2호
• /
• pp.191-197
• /
• 2008

Specimens of Diophrys appendiculata (Ehrenberg, ] 838) and D. scutum (Dujardin, 1841) have been collected from the coastal and brackish waters around near Ulsan, during 2004-2007. Diophrys appendiculata and D. scutum are described taxonomically for the first time in Korea. Diagnostic characteristics of these species are as follows. Diophrys appendiculata: size in vivo $43-68{\times}25-50{\mu}m$, adoral zone of membranelles (AZM) covering 43-74% of cell length in impregnated and 46-65% in vivo specimens with 32-47 adoral membranelles (AM). Paroral membrane is slightly curved. Four to five dorsal kinetal (DK) rows are fragmented and anterior and posterior parts of rows densely ciliated. Two macronuclear nodules (Ma) irregular and elongated oval in shape and widely separated. D. scutum: size in vivo $125-225{\times}75-140{\mu}m$, AZM extending to the middle of right border of body and covering 50-60% of cell length with 56-75 AMs. Body shape is typically ovoid with prominent concave margin at right posterio-lateral end, and rather thick and wide longitudinal ridge along lower buccal cavity on ventral side. Two macronuclei shaped like a sausage. five to six dorsal kineties.

• 환경생물
• /
• 제40권4호
• /
• pp.497-509
• /
• 2022

A strain of Amphidinium species was established from samples collected from the intertidal zone of a sandy beach of Jeju Island, Korea. Its cells were 13.0-15.0 ㎛ in length and 10.0-13.0 ㎛ in width. Its cell shape was round or oval and dorsoventrally flat. A pyrenoid was located in the center of the cell and a nucleus was posteriorly located. Its epicone was small and left-deflecting. Its cingulum had V-shape on the ventral side, forming a ventral ridge and extending to the sulcus. Polygonal amphiesmal vesicles and ring-shaped body scales not described previous were observed on the surface of the cell. Its morphological features were consistent with those of previously described Amphidinium fijiense. Phylogeny based on ITS region and LSU rDNA sequences revealed that this Amphidinium isolate was clearly clustered with other A. fijiense strains, but separated from other Amphidinium species. These results indicate that this Amphidinium isolate is A. fijiense. This study reports its presence for the first time in the intertidal zone of a sandy beach of Jeju Island, Korea.

• The Journal of Advanced Prosthodontics
• /
• 제15권6호
• /
• pp.302-314
• /
• 2023

PURPOSE. The aim of this study was to classify the shapes of retromolar pads and assess their morphometric differences using a 3D model. MATERIALS AND METHODS. Two hundred fully edentulous or Kennedy Class I partially edentulous patients (400 retromolar pads) were enrolled. Scan data of the definitive mandibular casts produced through functional impressions were obtained using a 3D laser scanner. Seven parameters (transverse diameter, longitudinal diameter, transverse-contour length, longitudinal-contour length, longitudinal/transverse diameter ratio, longitudinal/transverse-contour length ratio, and angle of the retromolar pad line to the residual alveolar ridge line) were measured using image analysis software. Subsequently, the pads were classified according to the shape. Statistical analyses were performed using 95% confidence intervals. RESULTS. Classifying the retromolar pads into three shapes led to high intra-examiner reliability (Cronbach's alpha = 0.933). The pear shape was the most common (56.5%), followed by oval/round (27.7%) and triangular (15.8%) shapes. There were no significant differences between the left and right sides according to the shape and no significant differences in any parameter according to age. The transverse diameter and longitudinal/transverse diameter ratio differed between sexes (P < .05). The triangular shape had a significantly different transverse diameter, transverse-contour length, longitudinal/transverse diameter ratio, and longitudinal/transverse-contour length ratio compared with the pear and oval/round shapes (P < .05). CONCLUSION. From a clinical reliability standpoint, classifying retromolar pads into three shapes (oval/round, pear-shaped, and triangular) is effective. The differences in the sizes among the shapes were attributed to the transverse measurement values.

• 대한조선학회논문집
• /
• 제47권3호
• /
• pp.469-475
• /
• 2010

The operation scenarios, types of ice, draft and propulsion system are important design point on the beginning stage of the ice breaking vessel. The concept of hull form in ice breaking vessel has to compromise the performance according to the operation route especially if ship is operating in ice and ice free water. The several hull forms were proposed to optimize the capability of the vessel in this paper. The effect of hull form according to type of ice is also discussing and explaining the ice resistance in each ice type as like pack ice, brash ice, level ice, rubble ice and ice ridge. The draft effect was examined and propulsion system for example FPP(Fixed pitch propeller), CPP(Controllable pitch propeller) and POD system was compared focusing on the propulsion efficiency.

• Journal of International Society for Simulation Surgery
• /
• 제3권2호
• /
• pp.90-92
• /
• 2016

Horizontal bone defect in the anterior maxilla makes it difficult to place dental implant. The golden standard for bone augmentation is autogenous block bone graft. Tight contact with recipient site and rigid fixation are two key factors for successful block bone graft. Ramal bone graft has been the most reliable methods for dental implant field. However, the curvature of the alveolar ridge is different from ramal bone shape. Intraoperative trimming of ramal bone is cumbersome for surgeon. In this technical note, a simple way to design the ramal bone harvest using bone wax stent is reviewed.

• Journal of Ship and Ocean Technology
• /
• 제8권2호
• /
• pp.29-40
• /
• 2004

Interaction of grounded ice ridges with underlying seabed is one of the major considerations in the design of Arctic pipeline system. Previously several ice scour models were developed by researchers to describe the ice scour-seabed interaction mechanism. In this paper, a parametric study on ice scouring mechanism is performed and the limitation of ice scour-seabed interaction models is discussed. Simple laboratory tests are carried out and then the shape pattern of deposited soil around the ice is redefined. New ice scour model assumes trapezoidal cross section based on the field observation data. Ice scour depth and soil resistance forces on seabed are calculated with varying the keel angle of a model ice ridge.

• Journal of Ship and Ocean Technology
• /
• 제7권4호
• /
• pp.1-15
• /
• 2003

The motion of passively floating body, whose keel can have a contact with seabed soil, is under the consideration. The body simulates ice ridge floating in shallow water. The force of seabed soil reaction applied to the grounded keel is estimated taking into account soil embankment near the grounded keel. Two-dimensional trajectories of body motion, the shape of the grooves in seabed and the height of soil embankment are calculated when the motion of the body is caused by semidiurnal $M_2$ tide. The influence of wave amplitude and bottom slope on the shapes of body trajectory and the grooves are analyzed.

• 한국추진공학회지
• /
• 제8권2호
• /
• pp.102-114
• /
• 2004

리치컷형 폭발볼트 모델에서, 3차원 솔리드 모델링을 통한 형상모델의 작성, 요소분할 방법, 경계조건의 부과 및 해석방법. 계산결과의 처리 등 폭발볼트의 수치해석에 필요한 모든 과정을 정립하고, 해석결과와 이미 수행된 시험결과의 비교를 통하여 볼트의 파손해석에 사용될 수 있는 파손모델과 파손응력을 선정하였다. 해석에는 볼트의 파손응력을 결정할 때 사용한 모델과, 시험결과와 해석결과로부터 설정된 파손모델의 타당성 평가를 위한 추가 모델들을 사용하였으며, 정립된 해석 프로시져의 적용으로 기존에 의존하였던 성능시험 평가 횟수를 대폭 줄일 수 있을 것으로 생각되며. 이에 따른 개발기간의 단축도 함에 고려할 수 있다. 특히, 기존의 폭발볼트 설계할 때 어려운 점으로 여겨졌던 폭발볼트의 최종 성능에 미치는 여러 가지 인자의 영향을 쉽게 평가할 수 있어, 이러한 설계능력향상, 시제품 제작 횟수의 감소, 개발기간의 단축 등은 최종적으로 시제개발 원가절감의 효과를 갖다 줄 것으로 판단된다.

• 정보처리학회논문지B
• /
• 제11B권3호
• /
• pp.297-302
• /
• 2004

본 논문에서는 컴퓨터 시각에서 가장 중요한 과제의 하나인 ,3차원 물체의 표현에 대해 원뿔형태의 기술과 표면 분류시 임계치를 자동으로 선정하는 방법에 대해 제안하고자 한다. 기존에 미분기하학에서 사용한 평균 곡률 (H)과 가우스 곡률(K)은 물체의 상당 부분을 차지하고 있는 원뿔표면에 대한 분류가 불가능하였다. 또한 평균 곡률과 가우스 곡률의 부호값에 따른 표면 분류가 실제 거리 영상에 적용시 올바로 분류가 안 되는 문제를 가지고 있었다. 이 논문에서는 기존의 이 같은 두 가지 문제를 해결하기 위해 리지와 벨리의 표면분류로부터 원뿔표면 형태(cone ridge, cone valley)를 분류해 내었다. 즉, 원뿔표면 형태의 경우 H의 값이 일정하고, 원뿔표면 형태의 경우는 H의 값이 다름을 이용하여 원뿔표면 형태를 분류하였다. 아울러 통계적인 관점에서 표면분류 임계치를 선정할 수 있는 방법을 제안하고 실험에 의해 제안한 방법의 유용성을 입증하고자 한다.

• 한국임상수의학회지
• /
• 제30권5호
• /
• pp.399-402
• /
• 2013

8세령의 암컷 잡종 더러브렛 말이 4개월간의 눈물과 함께 좌측 상안검에 종괴가 형성되어 있었다. 편측성 외과적 수술을 실시하여 좌측 안구와 안검 종괴를 절제하여 진단 의뢰되었다. 육안적으로 종괴는 $6{\times}7{\times}2$ cm 크기이고 반구형의 모양이며 표면은 불규칙하게 거칠었다. 단면상에서 종괴는 단단하고 유백색조를 띠고 있었다. 병리조직학적으로 심하게 증식된 중층편평상피세포가 진피층으로 심하게 함입되어 있었으며, 무수히 많은 표피 능선(rete ridge)과 중층편평상피 섬(squamous islands)을 형성하고 있었다. 종양세포의 섬들은 중심부에 층판상의 암진주와 괴사된 세포 붕괴물을 가지고 전형적인 세포 간교(intercellular bridge)로 연결된 여러 층의 가시세포로 구성되어있었다. 이와 같은 결과를 토대로 본 예는 말의 상안검에서 발생한 중층편평상피 암종으로 진단하였다.