• 제목/요약/키워드: Reynold's number

검색결과 20건 처리시간 0.023초

DSMC 방법 SMILE 코드를 이용한 Rothe 마이크로 노즐 시뮬레이션 (Simulation of Rothe Micronozzle Using DSMC method SMILE code)

  • 최영인;김영훈;옥호남;김인선
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2007년도 제28회 춘계학술대회논문집
    • /
    • pp.30-33
    • /
    • 2007
  • 고고도에서의 노즐 플룸 해석에 가장 일반적으로 사용되는 CFD 기법은 DSMC 방법이다. 본 논문에서는 DSMC 방법으로 만들어진 러시아 ITAM 연구소의 SMILE 코드를 사용하여 Rothe 마이크로노즐 내부유동을 시뮬레이션 하였다. 또한, SMILE 코드 결과의 유효성(신뢰성)을 확보하기 위하여 레이놀즈 수에 따른 노즐 내부 centerline의 온도를 Rothe의 실험치와 비교하여 검증하였다.

  • PDF

수중익 경계층의 천이영역에 미치는 표면조도의 영향 (Surface Roughness Effects on Boundary Layer Transition Region for Hydrofoil)

  • 문철진;김시영
    • 수산해양기술연구
    • /
    • 제30권2호
    • /
    • pp.116-124
    • /
    • 1994
  • There has been studied a lot of two dimensional hydrofoil sections for the boundary layers. This paper suggests that the plaiable roughness effects on boundary layer transition region of suction side for NACA 4412 hydrofoil sections provided by auxieiary shape factor and lag-entrainment effects. These results show that the laminar sepration. Transition and end of transition of the boundary layer due to pitting roughness effects, to the foil Reynold's number as well as to the angle of attack were delayed a little. And comparisons with valuable the other calculations and measurements show qualitative agreements.

  • PDF

파형 표면을 갖는 원형실린더의 공력특성 (Aerodynamics Characteristics of Circular Cylinders with Riffled Surfac)

  • 김용주;원창희;이승수
    • EDISON SW 활용 경진대회 논문집
    • /
    • 제3회(2014년)
    • /
    • pp.539-543
    • /
    • 2014
  • 임의의 물체가 유체 내에서 운동하거나 정지해 있을 때 유체에 의해서 운동에 방해가 되는 힘을 형상저항이라고 한다. 형상저항은 레이놀즈수에 의한 경계층의 흐름형태에 따라 변화하며, 경계층의 흐름형태는 레이놀즈수가 $10^5$보다 작은 경우 층류로, 그 이상의 경우 난류로 나타난다. 본 연구에서는 유체 내에 물체가 정지해 있을 경우 조도에 따른 형상저항의 변화를 알아보기 위해 각기 다른 조도를 가진 실린더를 모델링해 EDISON_CFD을 이용하여 전산 해석을 하였다. 실린더의 표면에 파장의 주기와 진폭, 층류와 난류 영역에서의 항력계수의 변화에 대해 검토하였다.

  • PDF

식물성 절연유의 유속과 BTA에 따른 유동대전 현상 연구 (Research of Flow Velocity and BTA According to the Streaming Electrification of Vegetable Insulating Oils)

  • 최순호;방정주;허창수
    • 한국전기전자재료학회논문지
    • /
    • 제25권10호
    • /
    • pp.791-797
    • /
    • 2012
  • Mineral insulating oils are an important insulating materials in oil-filled transformer. However, the mineral oil is the cause of the environmental problem. The vegetable oils are substitutes for mineral oil because of its biodegradability characteristic. As large size and high rating of the transformer increases, the losses increase at a faster rate. So insulating oil is forced circulation in the oil-filled transformer by using oil pumps. The flow electrification occurs when insulating oil was forced to be circulated. To check the flow electrification, had conducted experiments varying factors. As a result, the streaming electrification could see the changes according to flow velocity, oil temperature and insulation materials.

저등급석탄(低等級石炭)(인도네시아 IBC)의 고정층(固定層) 반응기(反應器) 실험(實驗)을 통한 건조(乾操) 반응속도론(反應速度論) 연구(硏究) (A Study on Drying Kinetics of Low Rank Coal(Indonesia-IBC) through the Fixed-Bed Reactor Experiments)

  • 강태진;전도만;전영신;강석환;이시훈;김상도;김형택
    • 자원리싸이클링
    • /
    • 제19권6호
    • /
    • pp.43-50
    • /
    • 2010
  • 에너지 위기로 인하여 석탄에 대한 관심이 증가하고 있다. 그 중에서도 저등급석탄에 대한 관심이 증가하고 있는데, 저등급석탄은 수분함량이 30~60%갱도로 수분함량이 높다. 이러한 저등급 석탄을 발전용 연료로 사용하기 위해서는 건조공정이 선행적으로 이루어져야 한다. 본 연구에서는 고정층 반응기를 이용하여 저등급석탄의 건조 반응속도론을 도출하였다. 건조반응속도는 입자크기, 주입가스 온도, 가스 유속, L/D의 영향을 변수로 하여 도출하였다. Reynold's number는 가스 유속과 석탄업자의 크기, L/D는 반응기 직경과 대상탄의 충진양을 보정하기 위해 고려하였다. 석탄의 건조 특성에서도 알 수 있듯이, 고정층 반응기를 이용한 저등급석탄의 건조에 있어서도 표면수분의 건조가 원활하며, 상 경계 반응이 적합한 메커니즘임을 확인 할 수 있었다.

태양열 공기난방기에서 핀의 형상에 따른 열전달 성능 평가 (Research on Thermal Performance by Different Fins in a Solar Air Heater)

  • 최휘웅;홍부표;윤정인;손창효;최광환
    • 한국태양에너지학회 논문집
    • /
    • 제33권6호
    • /
    • pp.85-91
    • /
    • 2013
  • It is essential to reduce the amount of fossil fuel because facing with the natural problem such as a global warming. To achieve this goal, many of interests in the use of renewable energy is growing. Especially, as one of these renewable energy systems, a solar air heater invention has been conducted for enhancing the efficiency of solar air heater. According to this trend, scale-down sized experiment apparatus was constructed and performed for searching a proper fin and confirming the heat transfer performance by fin shape on constant heat condition to enhance efficiency of solar air heater. In this experiment, heat gain, convection heat transfer coefficient, number of transfer units, Nusselt number, Reynold's number, friction factor, performance factor were investigated in order to evaluate the thermal characteristics based on the real data obtained. By comparison with the each fin performance, a zigzag shape keeping a right angle to the plate had the highest value among them.

Runge-Kutta method for flow of dusty fluid along exponentially stretching cylinder

  • Iqbal, Waheed;Jalil, Mudassar;Khadimallah, Mohamed A.;Ayed, Hamdi;Naeem, Muhammad N.;Hussain, Muzamal;Bouzgarrou, Souhail Mohamed;Mahmoud, S.R.;Ghandourah, E.;Taj, Muhammad;Tounsi, Abdelouahed
    • Steel and Composite Structures
    • /
    • 제36권5호
    • /
    • pp.603-615
    • /
    • 2020
  • The present manuscript focuses on the flow and heat transfer of the dusty fluid along exponentially stretching cylinder. Enormous attempts are made for fluid flow along cylinder but the study of fluid behavior along exponentially stretching cylinder is discussed lately. Using appropriate transformations, the governing partial differential equations are converted to non-dimensional ordinary differential equations. The transformed equations are solved numerically using Shooting technique with Runge-Kutta method. The influence of the physical parameters on the velocity and temperature profiles as well as the skin fraction coefficient and the local Nusselt number are examined in detail. The essential observations are as the fluid velocity decreases but temperature grows with rise in particle interaction parameter, and both the fluid velocity and temperature fall with increase in mass concentration parameter, Reynold number, Particle interaction parameter for temperature and the Prandtl number.

강제대류시 계절에 따른 KURT 내 열전달계수 결정에 관한 연구 (A Study on the Determination of the Seasonal Heat Transfer Coefficient in KURT Under Forced Convection)

  • 윤찬훈;권상기;황인필;김진
    • 방사성폐기물학회지
    • /
    • 제8권3호
    • /
    • pp.189-199
    • /
    • 2010
  • 고준위 방사성 폐기물 처분장의 경우 폐기물의 방사성 붕괴에 의해 열이 발생되며, 암반을 통한 열전달에 의해 처분장 주변 환경이 변화됨으로써 처분장의 안전성에 영향을 미칠 수 있다. 그러므로 지하 처분장 대기의 열전달계수를 결정하는 것은 매우 중요하다. 이에 본 연구에서는 Korea Atomic Energy Research Institute Underground Research Tunnel (KURT)에서 내부 환경 인자들의 측정을 통해 강제대류시 열전달계수를 산정하였다. 실험을 위해 KURT 내 히터구간의 막장 벽면에는 길이 2 m, 용량 5 kw의 히터를 삽입하여 암반 내부를 $90^{\circ}C$로 가열하였고, 외부와 연결된 급기용 팬에 의해 신선한 공기를 공급하였다. 연구결과, 외부공기 공급 후 히터구간 대기의 기류속도는 평균 0.81 m/s로 측정되었고 레이놀즈수는 약 310,000~340,000의 값을 나타냈다. 그리고 강제대류조건에서 히터구간 내 계절별 열전달계수는 각각 여름철 $7.68\;W/m^2{\cdot}K$와 겨울철 $7.24\;W/m^2{\cdot}K$의 수치를 나타냈다.

사석의 수리적 안정성 실험식 개발 (Experimental Formulae Development of Hydraulic Stability for Riprap)

  • 최흥식;박광호
    • 한국수자원학회논문집
    • /
    • 제44권6호
    • /
    • pp.449-459
    • /
    • 2011
  • 사석 입자의 운동을 시작하는 한계평균유속은 사석의 평균입경, 수심에 대한 사석의 평균입경 비, Froude수 및 한계평균유속에 대한 난류전단속도 비에 따라 증가함을 실험을 통해 확인하였고, 이 값을 사석의 수리적 안정성을 지배하는 변수로 채택하여 회귀분석을 통한 사석의 안정성 실험식을 개발하였다. 개발된 사석 안정성 식은 기존 실험의 유속범위인 0.36~0.73 m/s에서 0~5.0 m/s까지 확장시켜 실제 하천에 적용 가능성을 검토하였다. 큰 값의 Reynolds수의 확장에 따른 한계평균유속을 포함한 매개변수간의 유용한 상관성을 제시하였다. 실험값으로부터 확장된 큰 값의 Reynolds의 범위에서의 사석 안정성에 대한 평균입경의 산정은 0~3.0 m/s에서는 미국 토목학회 공식과 미개척국에서 제시한 안정성식과 적합함을 보였으며, 3.0~5.0 m/s에서는 미국 토목학회 공식과 잘 일치하였다. 개발된 사석평균입경 결정공식은 일반적으로 미국 토목학회 공식과 잘 일치하였고, 기존 안정성식과 비교한 결과 대부분 잘 일치하는 것으로 확인되었다. 따라서 개발된 사석평균입경 산정식은 높은 사용성을 가지고 있음을 확인하였다.

다문화 사회에서의 일본의 「다문화보육」 (Multicultural Childcare in Japan: Current Circumstances and Future Perspectives)

  • 강란혜
    • 한국보육지원학회지
    • /
    • 제5권2호
    • /
    • pp.73-90
    • /
    • 2009
  • 본 연구는 가정이나 학교생활에서의 부적응 행동 아동을 대상으로 미술치료를 실시하여 우울 및 불안 감소와 자아존중감 향상에 어떠한 효과가 있는지 알아보기 위한 것이었다. 연구대상은 J시 초등학교 1학년 여자 아동(만 7세)으로 주 2회, 50분씩 총 24회기 미술치료 프로그램을 적용하였으며, 치료 종결부분에 어머니-아동과 함께 6회기 미술치료를 실시하였다. 아동의 우울 및 불안 감소를 알아보기 위해 Kovacs와 Beak(1977)이 개발한 Children's Depression Inventory(CDI)를 조수철 이영식(1990)이 번안한 한국형 아동용 우울 척도와 자아존중감 향상을 알아보기 위해 Reynolds와 Richmond(1978)가 제작한 Revised Child Manifest Anxiety Scale(RCMAS)을 조수철 최진숙(1990)이 번안한 척도를 사용하였다. 그리고 아동의 정서적인 평가를 위해 KHTP, KFD 그림검사를 사전-사후로 실시하여 분석하였으며, 프로그램 진행과정에서의 아동의 변화를 회기별로 분석하였다. 본 연구의 결과는 다음과 같다. 첫째, 미술치료가 아동의 우울 및 불안을 감소시키는데 효과가 있었다. 둘째, 미술치료가 아동의 자아존중감을 향상시키는데 효과가 있었다. 셋째, 아동의 KHTP, KFD 그림검사에서는 긍정적으로 정서적 안정이 변화되었으며, 가족의 소속감, 응집력이 강화되어 친밀한 가족으로 변화하였다. 넷째, 회기별 미술치료 프로그램 진행과정에서 아동의 우울 및 불안이 감소되고 자아존중감이 향상되었다. 이상의 연구결과를 통해 미술치료가 부적응 행동 아동의 우울 및 불안을 감소시키고 자아존중감을 향상시키는데 긍정적인 효과가 있음을 알 수 있었다.

  • PDF