• Journal of Information Processing Systems
• /
• 제12권3호
• /
• pp.525-537
• /
• 2016

Data hiding is a wide field that is helpful to secure network communications. It is common that many data hiding researchers consider improving and increasing many aspects such as capacity, stego file quality, or robustness. In this paper, we use an audio file as a cover and propose a reversible steganographic method that is modifying the sample values using modulus function in order to make the reminder of that particular value to be same as the secret bit that is needed to be embedded. In addition, we use a location map that locates these modified sample values. This is because in reversible data hiding it needs to exactly recover both the secret message and the original audio file from that stego file. The experimental results show that, this method (measured by correlation algorithm) is able to retrieve exactly the same secret message and audio file. Moreover, it has made a significant improvement in terms of the following: the capacity since each sample value is carrying a secret bit. The quality measured by peak signal-to-noise ratio (PSNR), signal-to-noise ratio (SNR), Pearson correlation coefficient (PCC), and Similarity Index Modulation (SIM). All of them have proven that the quality of the stego audio is relatively high.

• Carbon letters
• /
• 제9권3호
• /
• pp.210-217
• /
• 2008

Petroleum pitch and coke with wet mixture method or with dry mixture method were investigated to develop the composite anodic carbon material of high power lithium ion battery. Cokes coated with pitch were obtained by the heat treatment of mixture of cokes and pitch with different weight ratios at $800{\sim}1200^{\circ}C$. The charge and discharge characteristic of the consequent composite anodic carbon material assembled in batteries was tested. Cokes with wet mixture method have a smooth surface and their capacity changed little with changing temperature and content as compared to the cokes with dry mixture method. Although the reversible capacities showed different values by the anode manufacturing method, the composite anode with the mixture of 20 wt% of petroleum pitch and 80 wt% of coke showed the higher power capability and initial efficiency than the pitch based anode. However, the reversible capacity of the composite anode showed the reduced value as compared with the pitch based anode.

• Nano
• /
• 제13권12호
• /
• pp.1850139.1-1850139.10
• /
• 2018

$Co_3O_4$ nanocrystals have been synthesized via an ordinary one-step calcination of a cobalt-based 2D coordination polymer [Co(tfbdc)(4,4'-bpy)$(H_2O)_2$]. As an anode material for lithium-ion batteries, the obtained $Co_3O_4$ nanocrystals exhibit high reversible capacity, excellent cyclic stability and better rate capability. The reversible capacity of the $Co_3O_4$ nanocrystals maintains $713mA\;h\;g^{-1}$ after 50 cycles at a current density of $50mA\;g^{-1}$. Our results confirm that searching for metal oxides nanomaterials used as anode materials of lithium ion batteries via the calcinations of 2D coordination polymer is a new route.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.674-690
• /
• 2021

This study proposes a hybrid marine power system combining dual-fuel generators, a fuel cell, and Vanadium Redox Flow Batteries (VRFB). Rigorous verification and validation of the dynamic modelling and integration of the system are conducted. A case study for the application of the hybrid propulsion system to a passenger ship is conducted to examine its time-variant behaviour. A comprehensive model of the reversible and irreversible capacity degradation of the VRFB stack unit is proposed and validated. The capacity retention of the VRFB stack is simulated by being integrated within the hybrid propulsion system. Reversible degradation of the VRFB stack is precisely predicted and rehabilitated based on the predefined operational schedule, while the irreversible portion is retained until the affected components are replaced. Consequently, the advantages of the VRFB system as an on-board ESS are demonstrated through the application of a hybrid propulsion system for liner shipping with fixed routes.

• Journal of the Microelectronics and Packaging Society
• /
• 제6권2호
• /
• pp.69-74
• /
• 1999

Graphite and carbonaceous materials intercalate and deintercalate Li-ion reversibly into their layered structures. These materials show an excellent capacity for using a negative electrode in Li-ion batteries, because the electrochemical potential of Li-ion intercalated carbon is almost identical with that of lithium metal. Carbon used in this study was obtained by the pyrolysis of petroleum pitch, and heat-treated at the several temperatures between $700^{\circ}C$ and $1300^{\circ}C$. XRD analysis revealed that crystallization of carbon increased with increasing the heat treatment temperature. Charge/discharge properties were studied by a constant-current step at the rate of 0.1C, and the interfacial reaction between the electrolyte and the surface of carbon electrode was studied by cyclic voltammetry. Cell capacities were investigated in terms of the heat treatment temperature and the cycle number. Reversible capacity increased with the heat treatment temperature up to $1000^{\circ}C$, thereafter decreased continuously. Also, charge capacity decreased with the cycle number, while the reversibility improved with it.

• Journal of the Korean Electrochemical Society
• /
• 제22권4호
• /
• pp.172-176
• /
• 2019

The first commercialized cathode material, $LiCoO_2$, suffers from disadvantages such as high cost and toxicity and also possesses safety problems. The nickel-rich $LiNi_{0.9}Mn_{0.1}O_2$ cathode material, used as an alternative to $LiCoO_2$, has highly reversible capacity and high energy density. So, the nickel-rich $LiNi_{0.9}Mn_{0.1}O_2$ cathode material is widely used as an alternative to $LiCoO_2$ due to its highly reversible capacity and high energy density. However, $LiNi_{0.9}Mn_{0.1}O_2$ has several disadvantages as well, such as poor cycle performance and poor thermal instability. To address these problems, we synthesized a new material, $LiNi_{0.5}Mn_{0.5}O_2$, as a shell on the surface of a core to suppress the surface degradation. The new material showed high structural and thermal stabilities and could also maintain a high capacity. The capacity retention of the core-shell cathode (87.7%) was better than that of the core cathode (76.9%) after 50 cycles. Analysis using differential scanning calorimetry revealed that the heat generation in the core-shell cathode ($65.9Jg^{-1}$) was lower than that in the core cathode ($559.7Jg^{-1}$).

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권1호
• /
• pp.132-148
• /
• 2013

Via the Internet, the information infrastructure of modern health care has already established medical information systems to share electronic health records among patients and health care providers. Data hiding plays an important role to protect medical images. Because modern medical devices have improved, high resolutions of medical images are provided to detect early diseases. The high quality medical images are used to recognize complicated anatomical structures such as soft tissues, muscles, and internal organs to support diagnosis of diseases. For instance, 16-bit depth medical images will provide 65,536 discrete levels to show more details of anatomical structures. In general, the feature of low utilization rate of intensity in 16-bit depth will be utilized to handle overflow/underflow problem. Nowadays, most of data hiding algorithms are still experimenting on 8-bit depth medical images. We proposed a novel reversible data hiding scheme testing on 16-bit depth CT and MRI medical image. And the peak point and zero point of a histogram are applied to embed secret message k bits without salt-and-pepper.

• Journal of Korea Multimedia Society
• /
• 제18권11호
• /
• pp.1332-1341
• /
• 2015

This paper proposes a novel reversible secret sharing scheme using AES algorithm in encrypted images. In the proposed scheme, a role of the dealer is divided into an image provider and a data hider. The image provider encrypts the cover image with a shared secret key and sends it to the dealer. The dealer embeds the secret data into the encrypted image and transmits encrypted shadow images to the corresponding participants. We utilize Galois polynomial arithmetic operation over 2⁸ and the coefficient of the higher-order term is fixed to one in order to prevent the overflow. In experimental results, we demonstrate that the PSNR is sustained close to 44dB and the embedding capacity is 524,288 bits.

• The KIPS Transactions:PartC
• /
• 제14C권1호
• /
• pp.39-44
• /
• 2007

In this paper, we propose a reversible watermarking method to recover an original image after the watermark has been extracted. Most watermarking algorithms cause degradation of image quality in original digital content in the process of embedding watermark. In the proposed algorithm, the original image can be obtained when the degradation is removed from the watermarked image after extracting watermark information. In the proposed method, we utilize histogram shifting concept and Location Map structure. We could solve the Filp-Flop problem by using Location Map structure and enlarge the information embedding capacity by embedding recursively. Experimental results demonstrate that the embedding information as large as 120k bits can be realized while the invisibility as high as 41dB can be maintained.

• Carbon letters
• /
• 제9권3호
• /
• pp.181-187
• /
• 2008

Batch sorption experiments were carried out for the removal of metylene blue from its aqueous solution using $H_3PO_4$ activated Acacia arabica carbon (AAC). The prepared activated carbon was characterized and was found as an effective adsorbent material. The operating variables studied were initial metylene blue concentration, AAC concentration and solution pH. AAC activated carbon posses a maximum sorption capacity for the range of initial dye concentrations studied (60~100 mg $L^{-1}$). The sorption kinetics were analyzed using reversible first order kinetics, second order, reversible first order, pseudo-first order, and pseudo-second order model. The sorption data tend to fit very well in pseudo-second order model for the entire sorption time. The average pseudo-second order rate constant, $K_{II}$ and regression coefficient value were determined to be 0.0174 mg $g^{-1}$ $min^{-1}$ and 0.9977. The biosorption process also fit well to reversible I order kinetics with a regression coefficient of 0.9878.