• 대한전기학회논문지
• /
• 제33권10호
• /
• pp.396-401
• /
• 1984

This paper present a method of using simplified models for deriving suboptimal controllers to the original higher-order systems. Routh approximation method is a very useful technique for reducing the order of a linear systems. This method dose not require a knowlege of system eigenvalues and eigenvectors and possesses many desirable features such as preservation of reduced order model stability and minimum computational requirements. These properties are utilized to derive suboptimal controllers in this paper. In order to implement htese ocntrollers on the original system, the relationship between the state vectors of the original system and the reduced order models is required. A procedure fir evaluating an approximate aggregation matrix is also developed. A numerical example is given for the illustration of this method, shich is compared with the existing Model aggregation method in the resultant figures.

• Structural Engineering and Mechanics
• /
• 제15권2호
• /
• pp.199-223
• /
• 2003

The formulation of a non-linear shear deformable shell element is presented for the solution of stability problems of stiffened plates and shells. The formulation of the geometrical stiffness presented here is exactly defined on the midsurface and is efficient for analyzing stability problems of thick plates and shells by incorporating bending moment and transverse shear resultant force. As a result of the explicit integration of the tangent stiffness matrix, this formulation is computationally very efficient in incremental nonlinear analysis. The element is free of both membrane and shear locking behaviour by using the assumed strain method such that the element performs very well in the thin shells. By using six degrees of freedom per node, the present element can model stiffened plate and shell structures. The formulation includes large displacement effects and elasto-plastic material behaviour. The material is assumed to be isotropic and elasto-plastic obeying Von Mises's yield condition and its associated flow rules. The results showed good agreement with references and computational efficiency.

• ETRI Journal
• /
• 제43권5호
• /
• pp.923-931
• /
• 2021

We studied the influence of GaAs top-layer thickness on the small-signal modulation response and 56 Gb/s four-level pulse-amplitude modulation eye quality of 850 nm vertical-cavity surface-emitting lasers (VCSELs). We considered the proportionality of the gain-saturation coefficient to the photon lifetime. The simulation results that employed the transfer-matrix method and laser rate equations led to the conclusion that the proportionality should be considered for proper explanation of the experimental results. From the obtained optical eyes, we could determine an optimum thickness of the GaAs top layer that rendered the best eye quality of VCSEL. We also compared two results: one result with a fixed gain-saturation coefficient and the other that considered the proportionality. The former result with the constant gain-saturation coefficient demonstrated a better eye quality and a wider optimum range of the GaAs top-layer thickness because the resultant higher damping reduced the relaxation oscillation.

• 한국전자파학회논문지
• /
• 제18권12호
• /
• pp.1408-1418
• /
• 2007

본 논문에서는 주파수 선택적 시변 채널 OFDM 시스템에서 파일럿 심볼을 이용하는 채널 예측 및 등화 방식의 성능을 분석하고 문제점 및 개선 방안을 제시한다. 주파수 영역 채널 행렬의 대역폭을 제한하기 위하여 시간 영역 윈도우를 도입하며, 채널 예측에 LS(Least Square) 및 선형 MMSE(Minimum Mean Square Error) 예측 방식을 이용한다. 채널 등화에는 채널 예측에 이용되는 파일럿 심볼의 존재가 고려된 선형 MMSE 및 결정 귀환 등화 방식을 이용한다. 계산량을 감소시키기 위하여 채널 등화 알고리즘에 요구되는 선형 연립 방정식의 풀이에 band LU 행렬 분해 알고리즘을 도입하며, 컴퓨터 시뮬레이션을 통하여 기존 방식과의 성능을 비교한다. 결정 귀환 등화 방식에 시간 영역 윈도우를 적용하는 경우, 결정 귀환 관련 행렬의 대역폭이 제한되지 않아 성능이 저하되는 문제점을 분석하였다.

• 한국강구조학회 논문집
• /
• 제20권3호
• /
• pp.409-419
• /
• 2008

율리신-이바노브 항복 조건을 이용하여 4절점 순수변위 준적합 쉘요소의 정식화를 제안하였다. 기하강성 행렬은 그린 변형률 텐서를 이용하여 휨변형률 및 전단변형률도 기하강성행렬에 고려되었다. 그 결과 접선강성행렬의 해석적인 적분으로 비선형 해석시 매우 효율적으로 계산이 되고 있다. 이 정식은 변형률 경화의 이바노브-유리신 항복조건을 이용하여 재료 비선형 해석시에도 쉽게 적분이 된다. 즉 두께 방향의 적층 적분을 하지 않는 율리신-이바노브의 정식은 대규모의 쉘 구조에도 계산상 아주 적합하다. 검증된 수치 예제에서 만족스러운 결과를 보여주고 있다.

• 대한안전경영과학회지
• /
• 제17권1호
• /
• pp.93-101
• /
• 2015

The demand from customers on better products and systems seems to be ever increasing. To meet the demand, the systems are becoming more and more complicated in terms of both scale and functionality, thereby requiring enormous effort in the development. One bright spot of this trend is that such effort has been the driving forces of the remarkable advancement in modern systems development. On the other hand, safety issues appear to be critical in many large-scale systems such as transportation and weapon systems including high-speed trains, airplanes, ships, missiles/rockets launchers, and so on. Such systems turn out to be prone to a variety of faults and thus the resultant failure can cause disastrous accidents. For the reason, they can be referred to as safety-critical systems. The systems failure can be attributed to either random or systemic factors (or sometimes both). The objective of this paper is on how to reduce potential systemic failure in safety critical systems. To do so, a proper system design is pursued to minimize the risk of systemic failure. A focus is placed on the fact that complex systems have a lot of complicated interfaces among the system elements. To effectively handle the sources of hazards at the complicated interfaces and resultant failure, a method is developed by utilizing a design structure matrix. As a case study, the developed method is applied in the design of train control systems.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권3호
• /
• pp.299-306
• /
• 2002

The load frequency control(LFC) of power system is one of important subjects in view of system operation and control. That is, even though the rapid load disturbances are applied to the given power system, the stable and reliable power should be supplied to the users, converging unconditionally and rapidly the frequency deviations and the tie-line power flow ones of each area into allowable boundary limits. Nonetheless of such needs, if the internal parameter perturbation and the sudden load variation are given, the unstable phenomena of power systems can be often brought out because of the large frequency deviation and the unsuppressible power line one. So, an optimal modulation controller for UC of multi-area power system is designed by a recursive algorithm that determines the state weighting matrix Q of a linear quadratic performance criterion. The optimal modulation controller is based on optimal control and can obtain the exact dynamic response of the UC of multi-area power system in the time domain. The performances of the resultant optimal modulation control, that is, the steady-state deviations of frequency and tie-line power flow and the related dynamics, were investigated and analyzed in detail by being applied to the UC of multi-area power system in the perturbations of predetermined internal parameters. Through the simulation results tried variously in this paper for disturbance of stepwise load changes, the superiorities of the proposed optimal modulation controller in robustness and stability were proved.

• 열처리공학회지
• /
• 제22권1호
• /
• pp.3-7
• /
• 2009

Variation in oxidation behavior with heat treatment temperature is investigated for a Ni-Ti alloy using X-ray diffraction, DSC (differential scanning calorimetry) and Auger electron spectroscopy. And the effect of oxidation on transformation behavior and superelasticity is characterized. A cold-worked 50.6Ni-Ti alloy is oxidized at 300-$700^{\circ}C$ for 1 hr in the air atmosphere. With an increase in heating temperature, the structure of $TiO_2$ changes from amorphous (300 and $400^{\circ}C$) to anatase ($500^{\circ}C$), and to rutile ($700^{\circ}C$). Activation energy of oxidation for NiTi is measured to be 51 Kcal/mol when heating temperature is $500^{\circ}C$ or above. Since Ti reacts preferably with oxygen, Ni content increases between matrix and oxide, forming $Ni_{3}Ti$ compounds. The resultant of oxidation decreases significantly $M_s$ and $A_s$ temperature in the specimen oxidized at $900^{\circ}C$ with $B_2{\rightarrow}M$ transformation path. An extra is found on cooling between two peaks in the specimen with $B_2{\rightarrow}R{\rightarrow}M$ one which is oxidized at $900^{\circ}C$ and aged at $500^{\circ}C$. Oxidation deteriorates superelasticity due to formation of Ni-rich compound.

• Journal of Microbiology
• /
• 제33권2호
• /
• pp.136-141
• /
• 1995

From a cluster of structural rRNA genes which has previsouly been cloned (Hwang and Kim, in submission; J. Microbiol. Biotechnol.), a 1.0-kb Eco RI fragment of DNA which shows significant homology to the 25S and rRNA s of Tricholoma matsutake was used for sequence analysis. Nucleotide sequence was bidirectionally determined using delection series of the DNA fragment. Comparing the resultant 1016-base sequence with sequences in the database, both the 3'end of 25S-rRNA gene and 5S rRNA gene were searched. The 5S rRNA gene is 118-bp in length and is located 158-bp downstream of 3'end of the 25S rRNA gene. IGSI and IGS2 (partial) sequences are also contained in the fragment. Multiple alignment of the 5S rRNA sequences was carried out with 5S rRNA sequences from some members of the subdivision Basidiomycotina obtained from the database. Polygenetic analysis with distance matrix established by Kimura's 2-parameter method and phylogenetic tree by UPGMA method proposed that T. matsutake is closely related to efibulobasidium allbescens. Secondary structure of 5S rRNA was also hypothesized to show similar topology with its generally accepted eukaryotic counterpart.

• 수산해양교육연구
• /
• 제25권6호
• /
• pp.1294-1305
• /
• 2013

The aim of this study was to identify the attitude of nursing students' toward death using Q-methodology and to obtain baseline data to improve nursing students' education program on death. Twenty-nine participants at a college classified 40 Q-statements on a one to nine scale. The resultant Q-sort was a matrix representing the participant's operant subjectivity on the issue under consideration. The results of above procedures were analyzed by PQ Method. The results revealed that there are three types of perception about nursing students' attitudes toward the death. The categories were labeled positive-perspective, pain-avoid and preparation-deficiency. Positive-perspective individuals have a positive sense of their life and death. Thus, they would not fear death, believing in an after-life world, while being positive towards donation of intestines after death. Pain-avoid individuals hope life and death without pain. Preparation-deficiency individuals are unprepared to die. In conclusion, this study discovers three types of the perception about nursing students' attitudes toward the perception of death. By identifying the nature of each of these types, this study can be useful to develop efficient strategies for education program on death.