• 제목/요약/키워드: Resultant Ground Impedance

검색결과 4건 처리시간 0.014초

병렬로 시공된 수직 접지전극의 합성접지임피던스의 주파수의존성 분석 (An Analysis of the Frequency-Dependent Resultant Ground Impedance of Vertical Ground Electrodes Installed in Parallel)

  • 이복희;조성철;성창훈
    • 조명전기설비학회논문지
    • /
    • 제26권2호
    • /
    • pp.99-105
    • /
    • 2012
  • This paper deals with the experimental results of the frequency-dependent resultant ground impedance of vertical ground electrodes installed with a regular n-polygon. In order to propose an effective method of installing the vertically-driven multiple ground electrodes used to obtain the low ground impedance, the resultant ground impedance of ground electrodes installed with a regular n-polygon were measured as functions of the number of ground electrodes and the frequency of test currents and the results were discussed based on the potential interferences among ground electrodes. As a consequence, the effect of potential interference on the resultant ground impedance of vertical ground electrodes is frequency-dependent and it is significant in the low frequency of a few hundreds [Hz]. The resultant ground impedance of multiple vertical ground electrodes is not decreased in linearly proportion to the number of ground electrodes due to the overlapped potential interferences. Also the distributed-parameter circuit model considering the potential interference, the frequency-dependent relative permittivity and resistivity of soil was proposed. The simulated results of the frequency-dependent resultant ground impedance of multiple vertical ground electrodes are in good agreement with the measured data.

전위간섭을 기초로 한 병렬 접지봉의 합성접지임피던스의 분석 (An Analysis on Resultant Ground Impedance Based on the Potential Interference Of Parallel Ground Rods)

  • 이복희;성창훈;양순만
    • 조명전기설비학회논문지
    • /
    • 제25권12호
    • /
    • pp.107-112
    • /
    • 2011
  • Multiple ground rods are commonly used to obtain the low ground impedance, but they will not reduce the ground impedance unless the spacings between the ground rods are sufficient. This paper presents the experimental results of frequency-dependent resultant ground impedance of two ground rods in parallel. The resultant ground impedance of two ground rods in parallel were measured as functions of the spacing and length of ground rods and the frequency of test currents and were discussed based on the potential interferences. As a consequence, the frequency-dependent ground impedance of single ground rod and two combined ground rods give capacitive. It was found that the effect of potential interference on the ground impedance is directly associated with the frequency-dependent ground impedance and is strong in low frequency. Also, in order to reduce the increasing rate of resultant ground impedance of two ground rods due to potential interference to within 10(%), two ground rods in parallel will be placed over one rod length apart.

접지그리드의 접지임피던스의 주파수 의존성 (Frequency Dependence of Impedance of the Grounding Grid)

  • 이복희;이동문;엄주홍;김교운
    • 조명전기설비학회논문지
    • /
    • 제17권5호
    • /
    • pp.22-28
    • /
    • 2003
  • 본 논문에서는 접지임피던스의 주파수 의존성에 대하여 기술하였다. 사용중인 접지시스템의 과도응답특성을 평가기법을 제안하기 위하여 가변주파수 인버터와 대역통과 필터를 사용하여 인가전류의 주파수를 가변시키면서 접지임피던스를 측정하였다. 20[Hz]∼2.1[kHz] 범위의 주파수에서 접지임피던스의 크기와 위상을 분석한 결과 접지임피던스는 인가전류의 주파수가 증가함에 따라 증가하는 경향을 나타내었다. 22.9[kV] 변전실 접지시스템에서 인가전류의 주파수가 2[kHz]일 때 측정한 접지임피던스는60[Hz]일 때 보다 거의 3배 정도 증가하였다. 접지시스템의 주파수 의존성은 접지도체의 인덕턴스에 의해 나타나는 리액턴스 성분에 기인하는 것으로 나타났다. 따라서 뇌서지 보호용 접지시스템에서는 인덕턴스를 줄이는 방향으로 접지그리드의 형태와 규모를 결정하는 것이 필수적이다.

전자계 이론을 기반으로 한 수평접지전극의 접지임피던스 수치계산 (Numerical Calculation for Grounding Impedance of a Horizontal Ground Electrode Based on the Electromagnetic Field Theory)

  • 이복희;조성철
    • 조명전기설비학회논문지
    • /
    • 제28권2호
    • /
    • pp.76-83
    • /
    • 2014
  • This paper deals with the numerical method of calculating the frequency-dependent impedances of grounding electrodes. The proposed electromagnetic field approach is based on the solutions to Maxwell's equations obtained from the method of moment in the frequency domain. In order to evaluate the quality of the proposed simulation method, the frequency-dependent impedances of horizontally-buried ground electrodes were presented. The program for calculating the current distributions and impedances of grounding electrodes was implemented in MATLAB. The grounding impedances of two 10m and 50m long horizontal ground electrodes were measured and simulated in the frequency range from 100Hz to 10MHz for easy analysis and comparison. Also the simulated results were compared with those calculated from a sophisticated computer program CDEGS (HIFREQ module). As a result, the resultant results of frequency-dependent impedances obtained by using the numerical simulation method proposed in this work are in good agreement with experimental data. The validity of the approach techniques was confirmed.