• Journal of Korean Society of Transportation
• /
• v.24 no.7 s.93
• /
• pp.91-100
• /
• 2006

Travel Demand Forecasting (TDF) is an essential and critical process in the evaluation of the highway improvement Project. The four-step TDF Process has generally been used to forecast travel demand and analyze the effects of diverted travel demand based on the given Origin-Destination trips in the future. Transportation system improvements, however, generate more travel, Induced Travel Demand (ITD) or latent travel demand, which has not been considered in the project evaluation. The Purpose of this study Is to develop a model which can forecast the ITD applied theory of economics and the Program(I.D.A) which can be widely applied to project evaluation analysis. The Kang-Byun-Book-Ro expansion scenario is used to apply and analyze a real-world situation. The result highlights that as much as 15% of diverted travel demand is generated as ITD. The results of this study are expected to improve reliability of the project evaluation of the highway improvement Project.

• Korean Institute of Interior Design Journal
• /
• v.20 no.6
• /
• pp.173-182
• /
• 2011

These days, Emotional Design is on the sustainable development through activity study thogh, until now, the study proceed too far with Sensibility Ergonomics applied to SD. However, on this paper, the study would be make progress through GSD that it applied to Verb. For this reason, applied to Emotional Design consideration of theory through JOAN MEYERS-LEVY's papaer titled "The Influence of Ceiling Height", Laban Movement Analysis and Aspect of Semiotics and then judgement of GSD would be make progress through experiment to collection of Emotional Vocabularies and evaluation of body movement. There is a method of analysis by using statistical program such as SPSS 18.0 and it would have validity of analysis. Here is a result of this study. According to heights of ceiling types(2.4M, 3.0M) there are differences between behavior of Figure Attachment, Emotional Vocabularies of the event and Body Movement. While the Figure Attachment has a tendency to restricted scope, CH has a tendency to make attachment within the scope. You could see the Negative Adjective for Emotional Vocabularies at CL and the Positive Adjective ranges at the CH. Basic body movement for passive, 'moving' and 'stretching' as shown at CL more than the CH. For active movement which has purpose, 'moving the weight' and 'stretching' as shown at CH more than at CL.

• Journal of Korea Multimedia Society
• /
• v.20 no.12
• /
• pp.1970-1979
• /
• 2017

Computerization of educational administration following educational informatization of government has been steadily improved for the purpose of teachers' offload and job efficiency, finally resulting that NEIS(National Education Information System) has been completed. The NEIS consists of Nationwide service of NEIS, Business portal system of NEIS, Authentication management system and so on. Students, parents and civil petitioners handle civil affairs through Nationwide service of NEIS and teachers and persons of task conduct theirs business by accessing the Business portal system of NEIS. At this time, users have to obtain their certification from Authentication management system. Previous Studies were mainly focused on the evaluation about its performance according to the introduction of NEIS. But from now on there is a growing interest in security assessment and an efficient method for security improvement to check if NEIS works properly. Therefore, in this thesis, we'll propose an analytic framework in which security assessment is carried out after comprehending the fault structures through performing Fault Fishbone Analysis based on the Fault Tree Analysis. As a result of the system applied, the system had the highest rate of improvement to 47.7 percent.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.921-927
• /
• 2001

Steady flow bench test is a practical, powerful and widely used test in most engine manufacturers to give a design concept of a new engine. In order to use steady data as a performance index, it is necessary to build some database, which can correlate the port characteristics with engine data. However, it is very hard to investigate all port and valve shapes with experimental tools. The steady flow scheme is relatively simple and its results are bulk ones such as flow rate and momentum of flow. Therefore a CFD code can be easily applied to the port evaluation. In this study, the steady flow test was simulated through two and three-dimensional analysis on intake port design for comparing with experimental data and confirming the feasibility of applying analytic method. For this purpose, the effect of valve curvature on flow rate was estimated by a CFD code. There results were compared with those of real steady flow tests. As a result, the 2-D analysis described the phenomena qualitatively well, and also the results of 3-D analysis were almost consistent with experimental data.

• Journal of Technologic Dentistry
• /
• v.25 no.1
• /
• pp.173-185
• /
• 2003

This study mainly intends to determine the factors for which dental technicians are satisfied with their jobs and how much the resulting job transfer rate is and thus to identify the correlation between them. For these purpose, 200 subjects were sampled out of dental technicians in Seoul and Incheon, and the survey was performed from July 19, 2002 to August 15 (for 25 days) with self-administered questionnaire. Out of all collected questionnaires, 131 pieces(65.5%) were addressed for this study. As for the tools for this study, the structured questionnaire was used with its proven reliability and feasibility, and the contents of questionnaire consisted of 32 questions on the basis of related references. The contents of questionnaire were categorized into 3 sections: General attribute of subjects; Factors for which dental technicians are satisfied with their jobs; and their intention of job transfer. The questionnaire consisted of total 32 questions which included general attribute of subjects(10 questions), factors of their satisfaction with jobs(17 questions) and intention of job transfer(5 questions). The data analysis was processed by computerized system with SPSS(Statistical Package for Social Sciences). Statistical analysis techniques included frequency, percentage, T-test, F-test analysis and regression analysis. As a result of those analyses, the conclusion can be summarized as follows: 1. As a result of analyzing the factors for which the subjects were satisfied with their jobs, it was found that there were significant differences in career and job title out of question items(P<0.001). It was also shown that the factors of subjects' satisfaction averaged 3.43, which was considerably higher value than I expected. It was found that job and management factors were major job satisfaction factors. 2. As a result of analyzing the intention of subjects to decide their job transfer, it was found that there were significant differences in job title and marital status out of question items(P<0.001). It was shown that the total average of the intention of their job transfer amounted to 3.06. It was shown that dental technicians have relatively higher intention of job transfer from their current work place. 3. It was found that there was inverse correlation between the factors of subjects' satisfaction with their jobs and their intention of job transfer(r=-0.490, P<0.05). Likewise, it was also found that there was inverse correlation mostly between the evaluation value for each independent variable region in term of each factor of job satisfaction and the value for the intention of job transfer. In view of these correlations, it was concluded that higher job satisfaction likely led to lower job transfer. 4. As a result of regression analysis so as to determine the influences of job satisfaction factors on the intention of job transfer, it was found that the highest influential factor was management factor. And it was shown that the test values of model were statistically significant and its explanatory power amounted to 54.6%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6163-6172
• /
• 2013

This study examined the job competence of the staff at the center for teaching and learning(CTL) in university and to find out the level of job competence, which has been asked to the staff of the CTL. For that, the factor of the job competence, which is required of the staff of the CTL, was inquired through a literature review. Based on the job competence, this study examined the required job competence of the staff in Daejeon city and Chungnam province. The result suggests that the job competence required of staff are the basic job competence, planning-analysis job competence, management job competence for the project, and evaluation job competence. The first factor in basic job competence is the attitude to change and innovation. In the planning-analysis job competence, the first factor is an analysis and consultation of instruction. In managing the job competence for the project, the first factor is the management of human resources, and the first factor in evaluating the job competence is an evaluation of the effectiveness of the media. Therefore, to revitalize the CTL, there is a need to organize an expert pool, plan and support program that is suitable for professional development.

• Journal of the Korean Society for information Management
• /
• v.37 no.2
• /
• pp.353-379
• /
• 2020

This study developed a user experience factors for the evaluation of knowledge and information resource system from the user experience perspectives, which is emerging as a new analysis standard in the field of information media and information service research. Based on the analysis criteria selected through literature analysis, 'system perception factor' and 'user experience factor' were derived as factors influencing the use of information systems through an experimental study based on the user experience sampling method. As a result, the user experience factors of final knowledge and information resource system includes nine user experience factors, 55 detailed user experience factors, and 138 system perception factors. This study is significant in that the abstract concept 'user experience' was derived and presented as a practical, concrete, measurable factor through experiments. The derived user experience factors should serve as a basis for measuring user experience perceived by users of the knowledge and information resource system.

• The Research Journal of the Costume Culture
• /
• v.14 no.3 s.62
• /
• pp.404-417
• /
• 2006

The purpose of this thesis, therefore, is to examine the shaping methods and the knitting drafts of sleeve cap in the knitwears which are currently used by the manufacturers; to study the curve forms of sleeves in knitwears by analyzing synthetically the results of investigating the problems of knit wear sleeves; to present the most suitable sleeve cap for the knitwears. As the studying methods, I collected the basic data from the working-level persons of knit wear manufacturers, examined the knitting draft in the knitwears, and from that, made three kinds of comparative experimental garments and one kind of research experimental one as 10G and 16G. In doing so, I showed the sleeve cap suitable for the knitwears with plain stitch after operating sensual evaluation with Liker's 5-point rating measure. The analysis of data was handled with statistics by using SPSS Ver. 12.0; the method of statistics was executed by Frequency Analysis, Trust Analysis, one-way ANOVA, and Duncan test according to each topic of the research. As the result of the sensual evaluation of the experimental garments produced from the study, the research experimental garment looks better than the comparative experimental one in both 10G and l6G; has less extra folds around the front part of sleeve cap; looks more natural in sleeve caps of the body part and of a sleeve. From this, I am able to figure out that the research experimental garment looks better than the comparative experimental one produced by knit wear manufacturers. In addition, I can come to know that the different knitting of the front line and the back one of armhole in the knitwears has a favorable impact on improving the appearance of a sleeve.

• Korean Journal of Food Science and Technology
• /
• v.42 no.4
• /
• pp.377-382
• /
• 2010

This study was conducted to establish a method to analyze biurea decomposed from azodicarbonamide in processed foods such as wheat flour and bread. New method was developed using high performance liquid chromatography mass/mass spectrometry to determine biurea in wheat flour and bakery products. The recovery rate was 94.3-112.5%. The limit of detection for biurea was 0.003 mg/kg, and the limit of quantification was 0.01 mg/kg. The monitoring results for biurea content using established methods showed that biurea was detected at 2.76 mg/kg in the azodicarbonamide-detected flour (detection rate, 2%). The detection rate in processed foods such as baked goods was 27% (16/59). The detection range was 0.19-18.01 mg/kg (average, 3.79 mg/kg). However, it was thought that the detection level was safe due to much lower values than the standard (45 mg/kg). As a result, the newly established biurea analytical method will contribute to the management of azodicarbonamide in processed foods such as wheat flour and bakery products.

• Journal of Conservation Science
• /
• v.32 no.2
• /
• pp.167-178
• /
• 2016

Despite the size layer is an important part for conserving the artworks in the configuration of oil painting, the conservation scientific approaches of that have not been made yet. Therefore, this study produced standard samples on the basis of the analysis results of oil painting works, and carried out the evaluation of functions of the size layer materials. As a result of literature material, traditionally, animal glue was used for the size layer, whereas synthetic resin have been used in combination with animal glue since the modern age, in particular, it was identified that Polyvinyl Acetate(PVAc) was in general use. As a result of analysis of oil painting works, size layer was detected on the support and it was identified as animal glue. As a result of analysis based on Funaoka canvas for ground, it showed that the lead oxide and the titanium dioxide were the main constituents. On the basis of these results, standard samples were produced. As a result of evaluation on the functions of the size layer materials, in the case of the animal glue, stable result was observed in the shrinkag expansion rate, whereas slight weakness was observed in moisture proofing, color, and tensile strength, and dense cracks were found on surface. As for PVAc(A), moisture proofing, color, and the tensile strength exhibited stable results. Higher shrinkage rate was observed and the cracks with wide gaps were found on surface. As for PVAc(B), tensile strength, shrinkage expansion rate, and surface observation showed stable results, whereas moisture proofing property showed poor results. Different aspects were observed in each experiment, and this phenomena were considered to be due to the density and the adhesion properties between the hydrophilic and hydrophobic molecules in the size layer materials. The results are expected to be used as materials for the oil painting work conservation henceforth.