• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1A
• /
• pp.1-8
• /
• 2009

Stay cable is easily exposed to vibration induced rainy wind effects. There are some problems for not only unexpected vibration but also well-known vibration. An outbreak of displacement by the said effects brings damages such as over-tension of cables and barriers, fatigue of anchorages and dampers, and additional shear force variation of stiffening girders. This study suggests analytic methodology for dynamic tension variation of cables and shear force variation of stiffening girders. Additionally this study announces with dynamic problems for cable stayed bridge briefly. To realize this subject, we divide restoring force into chord component and normal component and then make up the differential equations which can satisfy physical phenomenon for each component. Finally we apply adequate functions such as sinusoidal and parabola in order to reduce these differential equations. Therefore we can meet with good results through a series of above process. As a remarkable result, CIP recommendations (2002) give inadequate solution with over 10% error. However it gives very good solution if parts of our study are reflected at the said recommendations. The fact means that CIP recommendations (2002) well-known as international standard of stay cables are not even concern about this subject yet. For verification of this study, F.E. analysis using E.C.C. with external forces was fulfilled, and the accuracy and conciseness of this study were shown.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.3
• /
• pp.245-256
• /
• 2023

When restoring with a dental digital system for implant-supported prosthesis, a double digital scanning technique is required: an intraoral scan of the three-dimensional implant location and intraoral scan after placement of temporary denture or provisional prosthesis. During the intraoral scan, the use of scan body as a stable landmark can improve the accuracy of digital impression and simplify laboratory process. In this case, a full-digital system was used to plan and fabricate a custom abutment, provisional prosthesis, and definitive prosthesis. After implant placement, the scan area of the intraoral scan body connected with implant and the intraoral scan body marked on the inside of temporary denture were superimposed. Out of the superimposed files, a custom abutment and provisional prosthesis were fabricated which match the vertical dimension of temporary denture, and definitive prosthesis was fabricated based on provisional prosthesis. We report this case because result has been functionally and esthetically satisfactory by using vertical dimension and central relation set during the fabrication of temporary denture to the definitive prosthesis.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.3
• /
• pp.215-226
• /
• 2023

Severe wear of the anterior teeth facilitates the loss of anterior guidance, which protects the posterior teeth from wear during excursive movement. Additionally, when treating patients with collapsed occlusion due to multiple tooth loss and tooth wear, it is important to determine the presence of vertical dimension loss through accurate clinical and radiographic examinations and diagnostic wax-up. The patient of this case is a 44-year-old female patient who complained of overall tooth wear and loss of posterior teeth due to bruxism and clenching habits, visited the hospital with the address of restoring masticatory function and improving aesthetic appearance through prosthetic treatment. Through model analysis and diagnostic wax-up, an increase in vertical dimension was determined, and full mouth restoration with fixed prostheses was planned. The degree of adaptation to the vertical dimension was confirmed step by step using an occlusal splint designed with CAD (Computer aided design) software and 3-D (3-Dimensional) printed, and then restored with provisional restoration and after a 4-month adaptation period, the entire dentition was restored with metal ceramic crowns and implants. Through this procedure, satisfactory treatment results were obtained in terms of function and aesthetics.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.7
• /
• pp.419-430
• /
• 2019

The study sought to find out the actual process of adapting to social life through interviews with college students and adult women living as defectors in the South, and to find out how it would be desirable to move forward in terms of education in order for all of our lives to be happy. The method of research consisted of semi-structured interviews. The interview period was four months. Based on the results of the interview, the following conclusions are given. First, it is necessary to establish a direction for strengthening cooperation rather than conflict in education, and restoring homogeneity of the same people. It is also true that real challenges are not easy at a time when the fratricidal war like the 6.25 conflict has deepened the conflict. However, at this point, 65 years later, the nation cannot stay only in the past. Second, the perception that they disapprove of economic aid to North Korean defectors also exists in part among adults. Third, negative thoughts about reunification among South Koreans also appear relatively high. This is believed to be due to the argument that the growth of social welfare and economic growth is offset by the increase in unification costs. Fourth, the content of living in real life such as culture and art, along with knowledge-oriented education in school education, should be treated with the same weight. This should create an environment in which North Korean defectors can enjoy the same happiness as South Koreans.

• Journal of Wetlands Research
• /
• v.25 no.4
• /
• pp.248-256
• /
• 2023

ESG, which stands for Environmental, Social, and Governance, becomes a keyword in managing a company as it becomes an "indicator" that judge companies. Since the environment has suffered so much damage for economic development, it is now to reflect the enormous environmental costs of the future in the management standard rather than the immediate financial benefits at the expense of the environment. Compared to the days when corporate social responsibility (CSR) was discussed, ESG management has improved significantly as it requires practice beyond the declarative level, but the level of consideration for the environmental field is still not high. There may be many backgrounds, but the biggest problem may be the lack of understanding for other fields. Accordingly, this study aims to inform corporates of the need for investment in the environmental field by explaining ESG reviewed in the environmental field and ESG management required in the environmental field. Furthermore, another purpose is to inform them that ESG management is a win-win strategy that can have a meaningful effect not only in the environmental field where investment is received but also in terms of companies by explaining the benefits that companies can gain through this. To reach this goal, this study proposed a method of restoring a damaged ecosystem based on corporate investment, evaluating its effects based on carbon absorption capacity, and using it as a means of carbon neutrality practice as well as ESG management performance of a company.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.4
• /
• pp.308-315
• /
• 2023

In the case of a patients who have lost the centric stop and have a staggered occlusion of the residual teeth, various movements occur when the denture is loaded. Implant placement is necessary to reinforce the retention, support, and stabilization elements to reduce denture movement. However, in this case, considering the patient's age, aversion to surgery, and bone loss, implants were not placed and restoration was performed with a removable partial denture. In this case, it is important to set the correct mandibular position for restoration because the patient has a habit of chewing with the remaining teeth. In this case, a stable mandibular position was established using a gothic arch tracing, and good results were obtained by restoring with partial dentures, so this is reported.

• Journal of Environmental Impact Assessment
• /
• v.32 no.6
• /
• pp.463-472
• /
• 2023

The amount of damage and the area of damage to forest fires are increasing globally, and the effectiveness analysis of the restoration method after the damage is performed insufficient. This study calculated the area of forest fire damage was calculated using Sentinel-2B satellite images and stack map and the intensity of forest fire damage is analyzed according to the forest type. In addition, the vegetation index was calculated using various wavelength bands. Based on the results, the vegetation resilience by the restoration method was quantitatively. As results, areas with a high proportion of coniferous forests suffered high intensity forest fire damage, and areas with a relatively high ratio of mixed and broad-leaved forests tended to have low forest fire damage. Also, artificial forests showed a recovery of about 92.7% compared to before forest fires and natural forests showed a recovery of about 99.6% from the result of analyzing vegetation resilience in artificial and natural forests after forest fires. Accordingly, it was confirmed that natural forests after forest fire damage had superior vegetation resilience compared to artificial forests. It can be proposed that this study is meaningful in providing important information for efficiently restoring the affected target site and the selection criteria for trees to reduce forest fire damage through the evaluation of vegetation resilience by the intensity of forest fire damage and restoration methods.

• Journal of Industrial Convergence
• /
• v.21 no.9
• /
• pp.41-48
• /
• 2023

Recently, there has been a sharp increase in the damages caused by ransomware across various sectors of society, including individuals, businesses, and nations. Ransomware is a malicious software that infiltrates user computer systems, encrypts important files, and demands a ransom in exchange for restoring access to the files. Due to its diverse and sophisticated attack techniques, ransomware is more challenging to detect than other types of malware, and its impact is significant. Therefore, there is a critical need for accurate detection and mitigation methods. To achieve precise ransomware detection, an inference engine of a detection system must possess knowledge of ransomware features. In this paper, we propose a model to extract and classify the characteristics of ransomware for accurate detection of ransomware, calculate the similarity of the extracted characteristics, reduce the dimension of the characteristics, group the reduced characteristics, and classify the characteristics of ransomware into attack tools, inflow paths, installation files, command and control, executable files, acquisition rights, circumvention techniques, collected information, leakage techniques, and state changes of the target system. The classified characteristics were applied to the existing ransomware to prove the validity of the classification, and later, if the inference engine learned using this classification technique is installed in the detection system, most of the newly emerging and variant ransomware can be detected.

• Conservation Science in Museum
• /
• v.30
• /
• pp.1-22
• /
• 2023

This study aims to document the conservation treatment of the fine-hemp official headgear housed by the National Museum of Korea, and to reconsider its existing name following the restoration of the original form of the damaged cultural heritage asset. The headgear consists of a single inner frame with a vertical line at the front, a single outer frame surrounding the inner frame, and a double-layered headband that spans the circumference of the wearer's head and joins the inner and the outer frames. This study applied a conservation treatment to the men's undyed hemp headgear of the Joseon Dynasty in order to remove contaminants and foreign substances on the surface and repair the partially deteriorated and damaged fabric, thereby restoring and stabilizing the original shape and preparing it for exhibitions. The hemp headgear was sewed both by hand and with a sewing machine. Although its overall composition and style are similar to the same type of official headgear from the Joseon Dynasty, the use of a sewing machine supports the assumption that it was produced in the early 1900s. This study identified similarities between the overall composition and shape of the fully-preserved hemp official headgear and those of the jangbogwan, a type of men's official headgear worn by Confucian scholars as part of their everyday attire, and compared it with the shape of jangbogwan seen in documentary records, illustrations, prior research, and portraits from the Joseon Dynasty, as well as with the characteristics of extant jangbowan artifacts, eventually concluding that it is appropriate to classify and name the headgear as a jangbogwan.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.27 no.2
• /
• pp.1-16
• /
• 2024

To achieve carbon neutrality and restore the national environment, there is growing interest in policies to transform national land areas into green space, such as expanding nature-based solutions, increasing biodiversity, and improving ecosystem service functions. In addition to complying with international agreements such as the United Nations Framework Convention on Climate Change and the Convention on Biological Diversity, it is necessary to expand green spaces to achieve the 2050 Carbon Neutrality goal, which can be achieved by restoring the damaged land in an ecological way. However, it is challenging to implement green restoration in a systematic and active way due to conflicts of interest among landowners and lack of institutional support and advanced technology. Therefore, this study aims to develop a strategy to expand green restoration and implement it smoothly and systematically. This study examined the current status of green restoration in South Korea by investigating green restoration laws and systems and overseas trends, and by surveying the perceptions of 1,000 people selected from a pool of the public. The results of this study show that it is difficult to implement the green restoration efficiently because the laws related to restoration are scattered. According to the relevant legal plans, the perception and direction of restoration is to pursue a sustainable national land environment, allow people to benefit from nature, improve the quality of life, and nurture related industries and human resources. In the international community, it is mentioned that green restoration contributes to achieving the 2050 Carbon Neutrality goal, revitalizing green industries, developing and applying advanced technologies, maintaining consistency in restoration-related policies, expanding citizens' access to green spaces, and adopting nature-based solutions. Both experts and the public are aware of the seriousness of the damage to the natural environment and prefer restoration with human use rather than focusing on natural recovery. It is expected that this study will contribute to the future direction of green restoration and the implementation of tasks for the sustainable restoration of the national land environment and the zero-carbon era.