• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.3
• /
• pp.177-181
• /
• 2008

In this study, the authors analyzed the limit of IOPC Fund system, such as limit of compensation, amount of FC, long period of assessment by IOPC Fund, issue of non verification by poor claimant or small business, issue of poor claimant subsistence in early stage of accidents, and comparatively analyzed how the three countries resolved these limits by enacting special laws and government policy. Until recently most governments have carried out prevention policy for maritime safety, oil spill response, investigation of maritime accidents, and restoration of marine environment when oil spill accidents happened. However, governments have not actively participated in the oil spill compensation process because it is a matter of private sectors between the polluter and claimant. The governments have only limited their role in ratifying Civil Liability Convention and Fund Convention and enacted relevant domestic laws. However, the governments of France, Spain, and Korea have actively participated in the compensation process of oil pollution incidents of M/T Erika, M/T Prestige, and M/T Hebei Spirit. This is because they had experiences of unsuccessful compensation in M/T Amoco Cadiz, M/T Agean Sea, and M/T Sea Prince.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.1
• /
• pp.69-84
• /
• 2020

Natural shoreline repeats its re-treatment and advance in response to the endlessly varying sea-conditions, and once severely eroded under stormy weather conditions, natural beaches are gradually recovered via a boundary layer streaming when swells are prevailing after storms cease. Our understanding of the boundary layer streaming over surf-zone often falls short despite its great engineering value, and here it should be noted that the most sediments available along the shore are supplied over the surf-zone. In this rationale, numerical simulation was implemented to investigate the hydraulic characteristics of boundary layer streaming over the surf zone in this study. In doing so, comprehensive numerical models made of Spatially filtered Navier-Stokes Eq., LES (Large Eddy Simulation), Dynamic Smagorinsky turbulence closure were used, and the effects of turbulence closure such as Dynamic Smagorinsky in LES and k-ε on the numerically simulated flow field were also investigated. Numerical results show that due to the intrinsic limits of k-ε turbulence model, numerically simulated flow velocity near the bottom based on k-ε model and wall function are over-predicted than the one using Dynamic Smagorinsky in LES. It is also shown that flow velocities near the bottom are faster than the one above the bottom which are relatively free from the presence of the bottom, complying the typical boundary layer streaming by Longuet-Higgins (1957), the spatial scope where boundary layer streaming are occurring is extended well into the surf zone as incoming waves are getting longer. These tendencies are plausible considering that it is the bottom friction that triggers a boundary layer streaming, and longer waves start to feel the bottom much faster than shorter waves.

• Analytical Science and Technology
• /
• v.17 no.2
• /
• pp.130-144
• /
• 2004

Recently, the air pollution in A and B industrial area has become one of the most important issues, then 60 VOCs in the area were measured using a highly sensitive method. The VOCs were adsorbed onto Carbotrap using air sampler and subsequently desorbed by a thermal desorber system into gas chromatograph-mass spectrometry (TDS-GC-MS). The peaks of all compounds had good chromatographic properties and offered very sensitive response for the EI-MS (SIM). Method detection limits (MDL) ranged from 0.01 to 0.1 ppt(v/v), and linearities of calibration curves were over 0.995. We analyzed total 90 atmosphere air samples of A and B industrial complex using the method. Benzene, toluene, ethylbenzene, xylene, n-hexane, fluorotrichloromethane, carbon tetrachloride, 1,2-dichloroethane, 1,1,1-trichloroethane, trichloroethylene, tetrachloroethylene, styrene, 1,3,5-trimethylbenzene, 1,2,4-trimethylbenzene, sec-butylbenzene and naphthalen were identified as the major compounds in the air, and their average concentrations were 0.81, 5.02 1.30, 3.0, 0.81, 37.9, 0.07, 0.15, 0.15, 0.79, 0.06, 0.33, 0.03, 0.12, 0.23, and 0.35 ppb(v/v), respectively. The concentrations of VOCs were low in summer and high in fall or winter. When the concentrations detected in air compare with WHO's norm, no case exceed it.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.596-608
• /
• 2017

In 2002, the government arranged an institutional strategy to make it possible for a consumers to make a claim for damages caused by product defects against a business that produces and sells a product by enforcing the Product Liability Law(hereinafter referred to as 'PL'). On the other hand, due to the recent humidifier sterilizer accident, approximately 12 cases of related bills, such as a revised bill for the product liability law, have been proposed to the National Assembly at present in an effort to introduce the group action system and punitive compensation system for the purpose of the strengthening of the corporate product liability, and consumer damage relief. Ironically, as much as 62.6% of small & medium businesses, which are actual interested parties to this bill, are unaware of this. Many companies are responding to PL with the rationalization of document preparation & storage, clarification of responsibility relations with related business operators, and PL insurance policy purchase, or securing compensation funds as a means of Product Liability Defense(PLD), but the methods of preparation such as this leave much room for limits on the considerations of product design and product safety. This paper presents the individual management system model with more focus on product safety by looking into the clear concept of PL and the countermeasures against it, grasping the relevance between the PL system and individual management system, and integrating the PL response system in preparation for the PL. It is hoped that the result of this research objective will be evaluated as a rational countermeasure for small & medium businesses to respond effectively to the PL.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.4
• /
• pp.165-172
• /
• 2020

In this paper we propose an uses on-device-based edge computing technology and big data analysis methods through the use of on-device-based edge computing technology and analysis of big data, which are distributed computing paradigms that introduce computations and storage devices where necessary to solve problems such as transmission delays that occur when data is transmitted to central centers and processed in current general smart factories. However, even if edge computing-based technology is applied in practice, the increase in devices on the network edge will result in large amounts of data being transferred to the data center, resulting in the network band reaching its limits, which, despite the improvement of network technology, does not guarantee acceptable transfer speeds and response times, which are critical requirements for many applications. It provides the basis for developing into an AI-based facility prediction conservation analysis tool that can apply deep learning suitable for big data in the future by supporting intelligent facility management that can support productivity growth through research that can be applied to the field of facility preservation and smart factory industry with integrated hardware technology that can accommodate these requirements and factory management and control technology.

• The Journal of the Korea Contents Association
• /
• v.19 no.5
• /
• pp.562-571
• /
• 2019

The expansion of the performing arts market to include new genres of art that combine art and cutting-edge media technology has surpassed the limitations of traditional theatre art elements such as stage, costumes, lighting, sound, and props, allowing free expression of space-time and visual art. It is growing into a wide area with unlimited potential in the performing arts sector. In response to these changes and the demands of the time, there is an increasing demand for multi-talents who can plan and produce arts and technology-converged contents that will contribute to the development of the performing arts industry. As a result, university departments related to theatre art across the country feel that it is urgent to develop curricula that will enhance students' competency by incorporating the latest media technologies such as virtual reality, holography, and interactive motion sensors into the existing performance art visualization process. In this study, the author will examine the process of developing courses in technology-incorporated theatre art (design) through case studies of media technology-converged performances from the past 10 years. Based on the traditional concept of theatre art, the attempt to fuse stage art with media technology will be a cornerstone of attempts to foster a group of talented artists who transcend the limits of creative visual expression and creative value.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1251-1251
• /
• 2001

The routine analysis of milk chemical components is of major importance both for the management of animals in dairy farms and for quality control in dairy industries. NIRS technology is an analytical technique which greatly simplifies this routine. One of the most critical aspects in NIRS analysis of milk is sample preparation and analysis modes which should be fast and straightforward. An important difficulty when obtaining NIR spectra of milk is the high water content (80 to 90%) of this product, since water absorbs most of the infrared radiation, and, therefore, limits the accuracy of calibrating for other constituents. To avoid this problem, the DESIR system was set up. Other ways of radiation-sample interaction adapted for liquids or semi-liquids exist, which are practically instantaneous and with limited or null necessity of sample preparation: Transmission and Folded Transmission or Transflectance. The objective of the present work is to compare the precision and accuracy of milk calibration equations in two analysis modes: Reflectance (dry milk) and Folded Transmission (liquid milk). A FOSS-NIR Systems 6500 I spectrophotometer (400-2500 nm) provided with a spinning module was used. Two NIR spectroscopic methods for milk analysis were compared: a) folded transmission: liquid milk samples in a 0.1 pathlength sample cell (ref. IH-0345) and b) reflectance: dried milk samples in glass fibre filters placed in a standard ring cell. A set of 101 milk samples was used to develop the calibration equations, for the two NIR analysis modes, to predict casein, protein, fat and dry matter contents, and 48 milk samples to predict Somatic Cell Count (SCC). The calibrations obtained for protein, fat and dry matter have an excellent quantitative prediction power, since they present $r^2$ values higher than 0.9. The $r^2$ values are slightly lower for casein and SCC (0.88 and 0.89 respectively), but they still are sufficiently high. The accuracy of casein, protein and SCC equations is not affected by the analysis modes, since their ETVC values are very similar in reflectance and folded transmission (0.19% vs 0.21%; 0.16% vs 0.19% and 55.57% vs 53.11% respectively), Lower SECV values were obtained for the prediction of fat and dry matter with the folded transmission equations (0.14% and 0.25% respectively) compared to the results with the reflectance ones (0.43% and 0.34% respectively). In terms of accuracy and speed of analytical response, NIRS analysis of liquid milk is recommended (folded transmission), since the drying procedure takes 24 hours. However, both analysis modes offer satisfactory results.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.1
• /
• pp.8-17
• /
• 2023

In conventional liquid crystal display(LCD) manufacturing process, Indium Tin Oxide(ITO) as transparent electrode and rubbing process of polyimide as alignment layer are essential process to apply electric field and align liquid crystal molecules. However, there are some limits that deposition of ITO requires high vacuum state, and rubbing process might damage the device with tribolectric discharge. In this paper, we made nanocomposite with PEDOT:PSS and MWNT to replace ITO and constructed alignment layer by nano imprint lithography with nano wrinkle pattern, to replace rubbing process. These replacement made that only one PEDOT:PSS/MWNT film can function as two layers of ITO and polyimide alignment layer, which means simplification of process. Transferred nano wrinkle patterns functioned well as alignment layer, and we found out lowered threshold voltage and shortened response time as MWNT content increase, which is related to increment of electric conductivity of the film. Through this study, it may able to contribute to process simplification, reducing process cost, and suggesting a solution to disadvantage of rubbing process.

• Korean Journal of Environmental Biology
• /
• v.40 no.3
• /
• pp.247-254
• /
• 2022

To investigate the tolerance limit and critical thermal maximum (CTM), behavioral responses of wild goldeye rockfish Sebastes thompsoni according to exposure to high water temperature were observed using a continuous behavior tracking system. As a result, behavioral index (BI) of S. thompsoni in each temperature (20.0, 25.0, and 30.0℃) showed a significant difference (p<0.05) when compared with the value measured in a stable condition of 15.0℃. The activity level of S. thompsoni exposed to 25.0℃ decreased sharply after 20 hours. Their rest time at the bottom of experiment chamber increased, and their normal swimming and metabolic activities were disturbed. In addition, at a high water temperature of 30.0℃, S. thompsoni reached the limit of resistance and showed a sub-lethal reaction of swimming behavior, with energy consumption in the body increased and all test organisms died. In conclusion, the eco-physiological response of S. thompsoni to water temperature varied greatly depending on the fluctuation range of the exposed temperature and the exposure time. In addition, the tolerance limit of S. thompsoni to high water temperature was predicted to be 25.0-30.0℃. The maximum critical thermal that had a great influence on the survival of this species was found to be around 30.0℃.

• The Korean Journal of Franchise Management
• /
• v.3 no.1
• /
• pp.111-129
• /
• 2012

Domestic franchise industry is a promising business to more than 10% per year growth rate and emerging as core of retail. In addition, due to the socio-cultural phenomena, including the retirement of the baby-boom generation, the growth of the franchise industry for some time expected to continue. But Domestic franchise reveals that limits to ensure for new franchisees because that few industries are concentrated to advance for franchisor and franchisees. Franchisors that within the industry came to a saturated, are for the growth and expansion of business into new industries to deploy as second, third brand. But reality is that the more success rather than failure. Therefore, in this study is a new brand development approach and case study results it focus on the BEERBARKET's successful story of INTO FRANCHISE SYSTEMS, INC. Case analysis results of this study, are reveled that franchise headquarters derived through research methods and research information, environmental survey and analysis should be continuously and objectively. Thus, based on the derived contents, the new brand Biz-Model should be established for recognition from the industry and customers. Ability to respond sensitively to changes in the environment and business activities can be associated with linking franchise headquarters belonging to the saturated competitive environment more is needed. Through proactively respond Franchise New business launching instance that BEERBARKET's successful story of INTO FRANCHISE SYSTEMS, INC. suggests the need to study about how to respond to environmental changes.