• 한국자원식물학회지
• /
• 제22권3호
• /
• pp.215-219
• /
• 2009

In these experiments Gamiojeoksan remnant components were analyzed to recycle this medicinal herb remnant fertilizers. The basic growth of Korean mint by application of Gamiojeoksan remnants were higher than control. As the amount of fertilizers were increased, plant height, stem diameter, number of leaves and number of branches were increased. The growth and yield were the highest in the treatment of 30 g/pot. Weight of whole plant of Korean mint has a tendency to be heavy in application of herbs remnant than that of control.

• 자원리싸이클링
• /
• 제29권6호
• /
• pp.15-26
• /
• 2020

최근 미세플라스틱의 발생 측면에서 폐플라스틱의 친환경적 처리에 대한 관심이 증대하고 있다. 이에, 폐플라스틱의 재활용이 폐기물 간소화, 이산화탄소 배출 감소 및 부가가치 제품 재생산의 이점을 제공하기 때문에 매우 중요하다고 할 수 있다. 특히, 친환경적인 폐플라스틱의 재활용을 위해서는 물리적 선별방법을 통해야 하며, 그 중에서도 폐플라스틱내의 재질별 분리가 가능한 부유선별이 물질재활용 측면에서 매우 효과적인 분리방법으로 잘 알려져 있다. 따라서, 본 총설에서는 혼합 폐플라스틱의 효과적인 재질 분리를 하기 위한 부유 선별의 연구 동향을 조사하였다. 추가적으로 보고된 연구결과들을 통하여 플라스틱의 원재료인 폴리머로부터 기능성 신소재로서의 활용에 대한 접근방법을 요약 정리하였다.

• 지질공학
• /
• 제17권2호
• /
• pp.279-287
• /
• 2007

채석장으로부터 원석을 채취하여 건축석재 및 쇄석골재 등으로 가공하는 과정에서 원석의 약 60% 정도가 폐석이나 석분토로 손실되고 있다. 이 중에서 폐석의 일부만이 도로포장용 쇄석골재로 활용되고 있을 뿐 대부분의 석분토는 석재의 가공이나 파쇄공정에서 분말형태로 물에 혼입되어 슬러지탱크에 침전되게 된다. 이러한 석분토가 방류되거나 살포되면 지표나 지중의 공극들이 메워져 지표수의 지중침투, 지하수의 흐름, 공기의 소통 등이 원활하게 이루어지지 않아 생태계에 악영향을 끼칠 수도 있다. 현행 우리나라 폐기물관리법(2003)에 따르면 석분토가 사업장 내에서 발생되는 산업폐기물로 분류되고 있어 대부분을 지중에 매설하고 있는 실정이다. 따라서 석분토의 물성 및 공학특성을 개량하여 효율적 재활용방안의 수립이 필요하다. 이 연구에서는 국내 채석장에서 발생되는 석분토의 개량 및 재활용 가능성을 분석하기 위해 6개 채석장으로부터 시험용 석분토 및 원지반토를 채취한 후, 이를 일정한 비율의 배합비로 제작한 혼합토를 대상으로 여러 토질시험을 실시하였다. 시험결과를 토대로 도로용 재료로서 석분토의 개량 및 재활용 가능성을 검토하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.715-718
• /
• 2001

This study uses traditional alum coagulation and sedimentation process to treat CMP wastewater from cleaning after polishing. The primary goal is to successfully recycle both solid fines and water for semiconductor manufacturing. Results indicated that CMP wastewater may be successfully treated to recover clean water and fine particles by alum coagulation. The optimum operating conditions for coagulation are as fellowing: alum dosage of 10 ppm, pH at 5, rapid mixing speed at 800 rpm, 5 min rapid mixing time, and long slow mixing time. The treated water with low turbidity and an average residual aluminum ion concentration of 0.23 ppm may be considered for reuse. The settled sludge after alum coagulation contains mainly SiO$_2$particle with a minor content of aluminum (1.7 wt%) may be considered as raw materials for glass and ceramic industry.

• 자원리싸이클링
• /
• 제10권2호
• /
• pp.3-12
• /
• 2001

Nowadays, countries all over the world are deeply concerned about pollution in the global environment, so they are seeking various ways to adequately disposal of waste. Still, the environmental situation seems to be getting worse and worse. It is evident that such wastes and pollution have been endangering human life nestled in this globe up to the end of the 20th century. We should not, however, tolerate such human misconduct and mal-management of resources any more in the new millenium. For realizing a society that is sustainable for generations to come, it is important to establish a social system for minimizing wastes, promote re-use and recycling, and develop technology for improving recycling efficiencies, including product designs that facil-itate re-use and recycling and innovative technologies for processing wastes. In this paper, reviewing the current status of Korean waste problems, the governmental policy and specific approach for the establishment for recycling society is considered.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.296-300
• /
• 2001

In order to recycle the incineration ash (bottom ash and fly ash) generated from the incineration of municipal waste for a cement material, salts as well as heavy metal should be removed by the stabilization treatment. Most of these heavy metal and over 80% of salts are removed by a washing as a pre-treatment. However, wastewater which is another pollutant is generated by a washing, then proper treatment should be developed. First the characteristics of incineration ashes collected from two domestic full-sized incinerators were investigated and removal rate of salts and heavy metals from them also studied. The wastewater quality was compared to the criteria of the regulation by analyzing the characteristics of generated wastewater during the washing of incineration ash as a condition of liquid/solid ratio. Also, we tried to used this experimental results for the basic data to develop proper processing technique of municipal waste.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2005년도 춘계임시총회 및 제25회 학술발표대회
• /
• pp.19-19
• /
• 2005

In this paper, the author analyzed the characteristics of cycle Economy which is a key concept of current Japanese environmental policy. The Japanese government has adopted the Eco Town Project in order to grow up vein industry. But it is not clear that Eco lown project alms to create cycle society or sustainable society. When considering the location of vein industries, it is important to consider how efficient this industry collects wastes and develops a recycling goods market. Present Japanese law requires the people and companies to reduce waste. As a result, conventional manufacturing discharges waste this is too massive for vein industry to dispose of or recycle.

• Nuclear Engineering and Technology
• /
• 제13권1호
• /
• pp.22-35
• /
• 1981

우리나라의 장기 우라늄 원광누적 소요량을 원자력 발전 계획모형, 원자로형 투입 방안 및 가능 핵주기에 따라 추정하였다. 투입 가능 모형은 가압경수로, 중수로 및 고속증식로로 선정하였으며, 가능 대체 핵주기로서는 가압경수로의 경우에, U자체 재순환 주기, U 및 Pu 자체 재순환 주기, 연소도 증가에 의한 개량 핵주기를 고려하였다. 또 U 자체 재순환이 가능한 경우에 대해서, 재처리 후 저장된 핵분열성 Pu 누적량을 계산하였으며, 이에 따라 고속증식로의 도입가능시기를 추정하였다. 우라늄 원광 누적 소요량의 최대치는 전세계 우라늄 원광 소요량의 약 4∼5%를 차지할 것으로 추정되었으며, 원자력 발전 계획 모형 상한의 경우에는 U 자체 재순환이 1990년부터 이루어질때, 2000년까지 1200MWe급 고속증식로 2기가 도입가능할 것으로 추정되었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권1호
• /
• pp.23-27
• /
• 2016

The technologies using magnetic force control have been investigated toward application in various fields. Some of them have been put into practical use as the results of technological development. This paper introduces our technical development in the field of water processing, scale removal, magnetic drug delivery system, decontamination of radioactive substances and resources recycling.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 추계학술대회 논문집
• /
• pp.171-177
• /
• 2000

It is essential to understand the creep behavior, which shows how long the characteristics of material maintains because press joined molding GMT-Sheet for recycle is usually used in the severe environment. In this study, we predict joining strength of GMT-Sheet for recycle, when lap length was changed. and we will investigate how compression ratio have an effect on creep behavior in press joined molding. The result of experiment of forming condition concerned with joining problem of GMT-Sheet is as followings joining efficiency. of GMT-Sheet, increases as lap joint length I, increases. Increase of compression ratio causes decrease o f joining efficiency after of GMT-Sheet joining. As the result of creep test, GMT-Sheet is easily damaged in high temperature range, because it is sensitive to the temperature