본 논문에서는 발진부 귀환경로에 스위칭소자를 이용하여 최소의 소자을 사용한 소형화된 새로운 방식의 이동통신 단말기용 듀얼대역 VCO(Voltage Control Oscillator)를 제안하였다. VCO에 공진기의 Q(Quality factor)값을 정확히 모델링하기 위하여 공진기를 등가 모델하고, 이론 수치 해석하여 최적의 공진기를 설계하였다. 본 논문에서 제안된 방식을 적용하여 GSM(Global System for Mobile), DCS(Digital Cordless System) 대역의 동작 주파수를 갖는 듀얼대역 전압제어 발진기를 설계하였으며, 논문의 객관성을 입증하기 위해 제작 및 실험을 통하여 새로 제안된 방식의 듀얼대역 전압제어 발진기의 실용화가 가능함을 확인하였고, 앞으로 차세대 이동통신 기기의 고주파 부품 등에 응용될 수 있을 것이다.
Due to the recent quantum leaps forward in bio-, nano-, and information-technologies (BT, NT and IT), the precisionization and miniaturization of mechanical and electrical components are in high demand. In particular, the ITrelated equipments that take a great part in our domestic industry are in the area requiring high precision technologies. As a consequence, the researches on the development vibration isolation systems that diminish external disturbance or internal vibration are highly required. Among the components comprising the vibration isolation system, air spring has become on a focal point for the researchers due to its merits. This air spring is able to support heavy loads, keep a low natural frequency despite of having a lower value of stiffness, and control the performance of vibration isolation. However, sometimes the sole use of air spring is in demand due to some economic reasons. Under this circumstance, the damping effect of sole air spring may not enough to reduce sufficient amount of vibration. In this study, the air spring mount system connecting with an external chamber is proposed to increase or control the damping effect. To investigate its damping mechanism, the thermal and dynamic behaviors of the system is examined through a theoretical modeling approach in this part of research. In this approach, thermomechanical and Helmholtz resonator type models are to be employed for the air spring/external chambers and connecting tube system, respectively. The frequency response functions (FRFs) derived from the modeling effort are evaluated with physical parametric values and the effects of connecting tube length on these FRFs are identified through computer simulations.
The thermoacoustic refrigerator has not only considerable possibility but also commercial usability, because it has high reliability, lower vibration, no moving part, and can easily be constructed. In order to determine the optimum resonant tube length and the frequency, the open-tube-type(3$\lambda$/4) and close- tube - type (2$\lambda$/2) thermoacoustic refrigerator were constructed. In third harmonic, the temperature difference of 3$\lambda$/4 refrigerator was $53^{\circ}C$(resonator length :400mm). In second harmonic, the temperature difference of 2$\lambda$/2 refrigerator was $51^{\circ}C$(resonator length :400mm).
본 논문에서는 Hairpin 발진기의 위상잡음을 개선시키기 위하여 접지 면에 Aperture를 구현하였다 Aperture를 마이크로스 트립 Hairpin 공진기에 적용함으로써 결합계수의 증가로 인해 마이크로스트립라인이 가지고 있는 Q값을 증가시켰다. 기존의 마이크로스트립 Hairpin 발진기와 비교하였을 때 Aperture를 적용한 발진기가 위상잡음을 100KHz offset에서 약 19dBc 개선시켰다. 제작된 발진기는 5.83GHz 대역이고, 출력전력은 -4.33dBm을 획득하였다.
Aperture has been employed on the ground plane in the Hair Pin resonator. Aperture made by etching the part of the ground effected coupling coefficient and then quality factor of Hair Pin resonator has been increased. When the hair pin oscillator using aperture has been compared with the conventional hair pin oscillator using microstrip, it has been improved the phase noise about 19dBc @100KHz. Oscillation frequency of the hair pin oscillator using aperture has been 5.83GHz band and output power is -4.33dBm.
본 논문에서는 부성저항을 갖는 발진부의 귀환 경로에 PIN 다이오드를 이용한 스위칭 회로를 추가하여 저 위상잡음 듀얼밴드 전압제어 발진기를 구현하였다. PIN 다이오드에 전원이 인가되지 않았을 때는 5㎓ 대역에서 발진이 일어나고, 인가되었을 때는 1.8㎓ 대역에서 발진이 일어난다. VCO의 위상잡음을 향상시키기 위하여 공진기에 PBG(Photonic Bandgap)구조를 접지 면에 적용하였다. 5.25㎓에서 출력 전력은 -9.17㏈m, 위상잡음은 -102㏈c/㎐이고, 1.8㎓에서 출력 전력은 -5.17㏈m, 위상잡음은 -101㏈c/㎐이다.
본 논문에서는 굴절률 감지 방식의 수직 결합형 폴리머 마이크로링 공진기 기반 글루코스 바이오 센서를 제안하고 구현하였다. 이 센서에서 상부 클래딩 역할을 하는 글루코스 분석 대상물의 농도 변화는 링 공진기의 공진파장 이동을 측정함으로써 얻어진다. 특히, 센서의 감도를 향상시키기 위해 다음과 같은 방법을 사용하였다. 첫째로, 분석 대상물에 근접한 유효굴절률을 갖는 폴리머 도파로 구조를 공진기 센서에 도입하였다. 둘째로, 분석 물질의 접촉면적을 확대하기 위해 측면 클래딩층이 충분히 식각된 pedestal 링 도파로 구조를 사용하였다. 제안된 공진기 센서는 빔전파 방법을 사용하여 설계하고 분석하였다. 사용된 코어 및 클래딩용 폴리머의 굴절률은 각각 1.430과 1.375였으며, 링 반경은 $400\;{\mu}m$였다. 이 때 얻어진 도파로의 유효굴절률은 ${\sim}1.390$였으며 글루코스 수용액의 굴절률 1.333와 매우 근접하였다. 제작된 소자의 기본적인 전달특성은 FSR(free spectral range) 0.66 nm, 대역폭 ${\sim}0.15\;nm$, Q 값 10,000 이었다. 1550 nm 광파장 대역에서 얻어진 측정 결과를 살펴보면, 센서 감도는 ${\sim}0.28\;pm$/(mg/dL)였으며, 이에 따른 굴절률 변화 감도는 ${\sim}200\;nm/RIU$였다.
본 논문은 공동공진기(cavity resonator)와 스트립라인(stripline) 구조를 이용하여 전력을 전송할 수 있도록 구현한 무접점 전력 전송 장치에 관한 것이다. 전력 전송 시 송수신기가 밀착된 상태에서 구현되는 무접점 전력 전송 방식으로, 외부에 도체 단자가 없어 송수신기가 전기적으로 분리되며, 전력 송수신에 필요한 수신부의 크기를 최소화할 수 있다. 공진기용 공동(cavity)의 윗면 도체판에 입력 포트 및 출력 포트용 슬롯(slot)을 구성하고, 그 위에 스트립라인 구조를 이용하여 입력 포트와 출력 포트를 형성한 공동공진기에서, 출력 포트의 일부를 분리하여 탈착 가능하도록 전력수신부를 형성하고, 이 전력수신부를 제외한 나머지 부분 즉, 스트립라인-슬롯 결합(coupling)된 입력 포트, 공동공진기, 출력 포트용 슬롯 등은 모두 전력송신부에 포함시킴으로 전력 전송 장치를 송수신기로 분리하여 제작할 수 있다. 이 송수신기를 결합시키면 마치 하나의 공진기 내에서 입력 포트에서 출력 포트로 전력이 전달되는 형태가 된다. 제작된 무접점 전력 전송 장치의 중심 주파수는 5.782 GHz이며, 이때 측정된 $S_{21}$값은 -1.07 dB로 나타나 약 78 %의 높은 전력 전송율을 갖는 것을 확인하였다.
Nowadays, the study on the ceramic components and modules using LTCC is being performed and on the passives included in modules is being done also. But the characteristics of passives changes in ceramic module due to the coupling between patterns, so each block in module must be analyzed in the state of module including coupling factors. In our research each block of VCO, resonator part, oscillator part, output part is measured and analyzed and that allows the prediction of behavior of VCO.
본 연구는 비 침습 방식으로 인체 혈당변화를 감지하여 준 마이크로파 대역의 발진 주파수 변화로 나타내는 발진기 센서를 제안하였다. 마이크로스트립 선로의 접지 면에 형성된 유도성 슬롯(inductive slot)과 생체조직 사이에 전자기적 결합을 통해 공진기로 구현되었으며, 능동회로를 연결하여 발진기를 구현하였다. 생체 조직을 가상한 팬텀 박스를 이용하였고, 3단계(0, 400, 800 mg/dL)의 혈당 농도 수준을 변화시켰을 때 공진기의 공진주파수가 상향 이동하는 것을 시뮬레이션 하였다. 시제품을 제작하여 인체 대신 돼지의 생체를 이용하여 실험한 결과, 1,100 MHz 부근에서 400 mg/dL의 혈당 농도변화 대비 약 14 MHz의 발진 주파수 천이가 관찰되어 혈당 센서에 적용할 수 있음을 확인하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.