• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.4
• /
• pp.467-475
• /
• 2014

In this paper, we introduce a sparse recovery algorithm applied to a radar signal model, based on the compressive sensing(CS), for the formulation of the radar signatures, such as high-resolution range profile(HRRP) and ISAR(Inverse Synthetic Aperture Radar) image. When there exits missing data in observed RCS data samples, we cannot obtain correct high-resolution radar signatures with the traditional IDFT(Inverse Discrete Fourier Transform) method. However, high-resolution radar signatures using the sparse recovery algorithm can be successfully recovered in the presence of data missing and qualities of the recovered radar signatures are nearly comparable to those of radar signatures using a complete RCS data without missing data. Therefore, the results show that the sparse recovery algorithm rather than the DFT method can be suitably applied for the reconstruction of high-resolution radar signatures, although we collect incomplete RCS data due to unwanted interferences or jamming signals.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.17 no.3
• /
• pp.26-35
• /
• 1980

The degradation of image due to the finite size of sensing devices has been one of the problems in all digital imaging systems. The basic study on the improvement of the spatial resolution was carried out in both spatial and frequency domains by the resolution recovery techniques which have been used in optics. Here, the techniques were applied to CT (Computerized Tomography) system, and image with finer resolution was obtained by these techniques. The basic theory is described and the results of the simulation are shown.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.12
• /
• pp.5103-5115
• /
• 2015

In radar imaging, a target is usually consisted of a few strong scatterers which are sparsely distributed. In this paper, an improved sparse signal recovery algorithm based on smoothed l₀ (SL0) norm method is proposed to achieve high resolution ISAR imaging with limited pulse numbers. Firstly, one new smoothed function is proposed to approximate the l₀ norm to measure the sparsity. Then a single loop step is used instead of two loop layers in SL0 method which increases the searching density of variable parameter to ensure the recovery accuracy without increasing computation amount, the cost function is undated in every loop for the next loop until the termination is satisfied. Finally, the new set of solution is projected into the feasible set. Simulation results show that the proposed algorithm is superior to the several popular methods both in terms of the reconstruction performance and computation time. Real data ISAR imaging obtained by the proposed algorithm is competitive to several other methods.

• Journal of Korean Academy of Nursing
• /
• v.26 no.1
• /
• pp.107-126
• /
• 1996

The Purpose of this study was to build a substantive theory about the experience of postpartum depression. The qualitative research method used was rounded theory. The interviewees were eight others who had experienced postpartum depression. The data were collected through in-depth interviews with audiotape recording done by the investigator over a period of twelve months. he data were analyzed simultaneously by a constant comparative method in which new data were continuously coded into categories and properties according to Strauss and Corbin's methodology. Analysis the grounded data resulted in 28 concepts being identified. Eight categories emerged from the analysis. The categories were regret, loss of freedom, isolation of oneself, heartache, loss, emotional upset, avoidance, recovery. These substantive categories are consistent with precious research results. Causal conditions included : regret, loss of freedom. Phenomena : heartache, loss, emotional upset. Context : isolation oneself. Intervention condition : avoidance. Action/interaction strategies : desire for recovery. Consequences : recovery. These categories were synthesized into the core concept-The process of filling the empty loss of self. The process of the experienced postpartum depression was ① change after delivery, ② searching for a reason for depression, ③ effort to recover from postpartum depression, ④ recovery from postpartum depression and return to previous life. The process of recovery from postpartum depression was proceeded by ① support from others, especially husband, ② resolution of stressful life events, ③ reconstructing of life goals and resolution strategies, ④ acceptance of depression and seeking psychiatric treatment. Seven hypotheses were derived from the analysis. ① Mothers who experienced stressful life event and economic problem are more depressive. ② Mothers who have conflict with parents are more depressive. ③ The more somatic symptoms, the more depression. ④ Social support facilitates recovery from postpartum depression. ⑤ Mothers who have lower self-esteem are more depressive. ⑥ Mother's role overload disturbs recovery from postpartum depression. ⑦ Ideal maternal identity facilitates recovery from postpartum depression. Through this substantive theory, nurses can understand the importance of postpartum depression management.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1997.06a
• /
• pp.175-181
• /
• 1997

This paper describes the commercial application of custom ultrafiltration (UF) membranes in the resolution of two aqueous-based problems: the recovery and recycling of laundry wash water and the fmal polishing of sodium hydroxide sterilization solution in the dairy and brewing industries. Both applications are currently in the pilot Stage and employ custom-made UF membranes developed by Liumar Technologies Corporation of Ottawa, Canada.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.239-242
• /
• 2005

A high speed address recovery technique for AC plasma display Panel(PDP) is proposed. By removing the GND switching operation, the recovery speed can be increased and switching loss due to GND switch also becomes to be reduced. The proposed method is able to perform load-adaptive operation by controlling the voltage level of energy recovery capacitor, which prevents increasing inefficient power consumption caused by circuit loss during recovery operation. Thus, the technique shows the minimum address power consumption according to various displayed images, different from Prior methods operating in fixed mode regardless of images. Test results with 50" HD single-scan PDP(resolution = 1366$\times$768) show that less than 350ns of recovery time is successfully accomplished and about 54% of the maximum power consumption can be reduced, tracing minimum power consumption curves.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.9
• /
• pp.450-453
• /
• 2005

A high speed address recovery technique for AC plasma display panel(PDP) is proposed. Replacing GND switch by clamping diode. the recovery speed can be increased by saving GND hold-time and switching loss due to GND switch also becomes also be reduced. The proposed method is able to perform load-adaptive operation by controlling the voltage level of energy recovery capacitor, which prevents increasing inefficient power consumption caused by circuit loss during recovery operation. Test results with 50' HD single-scan PDP(resolution = 1366$\times$768) show that less than 3sons of recovery time is successfully accomplished and about$54\%$ of the maximum power consumption can be reduced, tracing minimum power consumption curves.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.23 no.58
• /
• pp.49-58
• /
• 2000

In order to resolve a deadlock problem in manufacturing systems, three main methods have been proposed-prevention, avoidance, and recovery. The prevention and avoidance methods require predicting deadlocks in advance in order to prohibit them. In contrast, the recovery method allows a system to enter a deadlock state, then resolves it usually using a common buffer. In this paper, a deadlock recovery method considering the impact of flexible job routings is proposed. This method is based on capacity-designated directed graph (CDG) model representing current requesting and occupying relations between Jobs and resources in order to detect a deadlock and then recovers it.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.10A
• /
• pp.1590-1597
• /
• 2000

This paper describes a CMOS data recovery circuit using oversampling technique. Digital oversampling is done using a delay locked loop circuit locked to multiple clock periods. The delay locked loop circuit generates the vernier delay resolution less than the gate delay of the delay chain. The transition and non-transition counting algorithm for 4x oversampling was implemented for data recovery and verified through FPGA. The chip has been fabricated with 0.6um CMOS technology and measured results are presented.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.15 no.1
• /
• pp.58-64
• /
• 2011

Objective: The 3-dimensional reconstruction method with resolution recovery modeling has advantages of high spatial resolution and contrast because of its precise modeling of spatial blurring according to the distance from detector plane. The aim of this study was to evaluate one of the resolution recovery reconstruction methods (Astonish, Philips Medical), compare it to other iterative reconstructions, and verify its clinical usefulness. Materials and Methods: NEMA IEC PET body phantom and Flanges Jaszczak ECT phantom (Data Spectrum Corp., USA) studies were performed using Skylight SPECT (Philips) system under four different conditions; short or long (2 times of short) radius, and half or full (40 kcts/frame) acquisition counts. Astonish reconstruction method was compared with two other iterative reconstructions; MLEM and 3D-OSEM which vendor supplied. For quantitative analysis, the contrast ratios obtained from IEC phantom test were compared. Reconstruction parameters were determined by optimization study using graph of contrast ratio versus background variability. The qualitative comparison was performed with Jaszczak ECT phantom and human myocardial data. Results: The overall contrast ratio was higher with Astonish than the others. For the largest hot sphere of 37 mm diameter, Astonish showed about 27.1% and 17.4% higher contrast ratio than MLEM and 3D-OSEM, in short radius study. For long radius, Astonish showed about 40.5% and 32.6% higher contrast ratio than MLEM and 3D-OSEM. The effect of acquired counts was insignificant. In the qualitative studies with Jaszczak phantom and human myocardial data, Astonish showed the best image quality. Conclusion: In this study, we have found out that Astonish can provide more reliable clinical results by better image quality compared to other iterative reconstruction methods. Although further clinical studies are required, Astonish would be used in clinics with confidence for enhancement of images.