• 대한조선학회지
• /
• 제7권2호
• /
• pp.41-60
• /
• 1970

Despite it's limitations, the existing Stream Line Tracing Method(Inverse Method) can be applied effectively to the design of better hull forms with practical proportions. Most of the calculating mechanism by the method for hull form design has been achieved. In this paper, authors have tried to improve the quality of wave making resistance on the 10,000GT liner among FY'67 Korean Standard Ship Form. Some numerical results obtained in this work and designed new lines are shown.

• 한국대기환경학회지
• /
• 제7권3호
• /
• pp.219-226
• /
• 1991

Results from study on physiological responses to $SO_2$ of Quercus spp. selected for restoration of vegetation damaged by air pollution in the field study were as follows. Tolerance of Quercus aliena, Q. acutissima and Q. mongolica used in this study to $SO_2$ was higher in that order and tolerance of these plants to $SO_2$ was high comparatively among trees composing of major forest vegetation of Korea including natural forests and plantations. Stomatal resistance of these plants was increased after exposure to $SO_2$ and range of increase was different among species. From discrepancy between order of tolerance to $SO_2$ and range of increase in stomatal resistance, we were estimated that resistance mechanisms of Quercus spp. were different among species as mechanism originated in avoidance and resistance, respectively. Water potential of plant leaves reduced after exposure to $SO_2$, degree of reduction accorded with order of tolerance to $SO_2$. Reduction of water potential of plants after exposure to $SO_2$ was initiated before appearance of visible damage in plant leaves and water potential of plants exposed to $SO_2$ of low concentration, in which plants were not showed viaible damage was also reduced.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1992년도 가을 학술발표회 논문집
• /
• pp.208-213
• /
• 1992

This research is related to the experimental verification of the shear resistance of horizontal joint in precast concrete large panel structures. a total of 9 spicemens was tested to assess their shear resistance. In the tests lateral forces have been applied to the specimen to cause shear failure while keeping the axial compression consistantly. The shear resistances of the specimens have been evaluated by investigating the deformations and failure modes of the specimens. From the test results, it is observed that the shear resistance of the horizontal joints of P.C panel structures are closely connected with shear friction mechanism.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.683-688
• /
• 2001

In case of constructing the concrete structures under seawater environment, the concrete suffers from deterioration due to penetration of various ions such as chloride, sulfate and magnesium in seawater. Tn the present study, Immersion tests with artificial seawater were carried out to investigate the resistance to seawater attack of antiwashout underwater concrete. From the results of compressive strength, it was found that blended cement concrete due to mineral admixtures such as fly ash(FA) and ground granulated blast-furnace slag(SGC), were superior to ordinary portland cement concrete with respect to the resistance to seawater attack. Moreover, XRD analysis indicated that the formed reactants of ordinary portland cement paste by sulfate and magnesium ions led to the deterioration of concrete. As expected, however, the blended cements with FA or SGC have a good resistance to seawater attack. This paper would discuss the mechanism of seawater deterioration and benefical effects of antiwashout underwater concretes with mineral admixtures.

• 미생물학회지
• /
• 제26권2호
• /
• pp.113-121
• /
• 1988

Ozone, an atmospheric pollutant, can damage similar UV and X-rays DNA and its components. It is possible then that the KNA damage produced by this gas are similar, to some extent, to those of radiations and that they could be repaired by the same DNA repair mechanisms. It has been observed in Escherichia coli that radiosensitive strains such as lex A, rec A and pol A, all deficient to some extent for DNA repair, are more sensitive to ozone than a wild type strain. We have thendetermined the ozone resistance and host-cell reactivation of ozone-damaged T3 phages for the E. coli double mutants pol A, lex A, uvr B, lex A, uvr A, rec A and rec A lox A. According to the results, the DNA polymerase 1 plays a key role in ozone resistance and Type 11 mechanism and/or shory patch excision repair are the most important for it. The interactions between the different DNA repair mechanisms are secondary. There is a strong correlation between ozone resistance and the capacity to reactivate T3 phages damaged by ozone.

• BMB Reports
• /
• 제33권4호
• /
• pp.332-336
• /
• 2000

Phenazine 1-carboxylic acid (PCA) is an antifungal antibiotic isolated from a culture filtrate of Bacillus sp. B-6 producing an acyl CoA synthetase inhibitor. This antibiotic is reported as an inhibitor of an acyl CoA synthetase from Pseudomonas sp.. Bacillus sp. B-6 was resistant to PCA up to 350 ${\mu}g/ml$. We investigated the mechanism of the resistance of Bacillus sp. B-6 to PCA. The rate of growth in a medium containing up to 100 ${\mu}g/ml$ was as rapid as the PCA-free medium. At a PCA concentration of 300 ${\mu}g/ml$, the growth rate was more than half that of the control. In this work, we purified acyl CoA synthetase from Bacillus sp. B-6 and found that this acyl CoA synthetase was much less sensitive to PCA than the acyl CoA synthetase from other source. These findings suggested that the insensitivity of Bacillus sp. B-6 acyl CoA synthetase plays an important role in the PCA resistance of this bacterium.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권16호
• /
• pp.6849-6853
• /
• 2014

Multidrug resistance (MDR) is a major impediment to successful chemotherapy of gastric cancer. Our aim was to establish an epirubicin-resistant cell subline (AGS/EPI) and to elucidate the mechanisms involved in acquired EPI resistance. The AGS/EPI cell subline developed by exposing parental AGS cells to stepwise increasing concentrations of EPI demonstrated 2.52-fold resistance relative to the AGS cell line, and mRNA expression of the ATP-dependent drug-efflux pump P-glycoprotein (Pgp), more recently known as ABCB1 protein, was similarly upregulated. An AGS/EPI cell subline could thus be effectively established, and MDR mechanism of these cells was shown to be related to the overexpression of mRNA of the ABCB1 gene.

• 전기전자학회논문지
• /
• 제17권3호
• /
• pp.229-233
• /
• 2013

We investigated electrical conduction and resistance switching behavior of the Ag/ZnO/Ti structures for random access memory devices. These films were prepared on glass substrate by dc sputtering technique at room temperature. The resistance switching follows unipolar switching mode with small switching voltages (0.4 V - 0.6 V). Two electrical conduction mechanisms dominating the LRS and HRS are Ohmic and trap-controlled space charge limited current, respectively. These both conductions are consistent with the filamentary model. Based on the filamentary model, the switching mechanism was also interpreted.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.847-847
• /
• 2004

Automobile cooling fans are operated with a radiator module. To design low noise, high performance cooling fan, radiator resistance should be considered in the design process. The system (radiator) resistance reduces axial velocity and increases effective angle of attack. This increasing effective angle of attack mechanism causes blade stall, performance decrease and noise increase. In this paper, To analyze fan performance, freewake and 3D CFD calculations are used To design high performance fan with consideration of system resistance, optimal twist concept is applied through momentum and blade element theory. To predict fan noise, empirical formula and acoustic analogy methods are used.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 춘계학술발표대회 논문집
• /
• pp.46-49
• /
• 2003

Aluminum based metal matrix composites(MMCs) are well known for their high specific strength, stiffness and hardness. They are gaining further importance because of their high wear resistance. In this study, Al/Saffil-20%, Al/Saffil-5%/Al2O3(particle type)-15% and Al/Saffil-5%/SiC(particle type)-15% hybird MMCs' wear behavior were characterized by the pin-on-disk test under various normal load The superior wear resistance was exhibited at Al/Saffil-5%/SiC(particle type)-15% MMCs. And this MMCs' predominant wear mechanism is subsurface cracking in the low load wear regime. Others(Al/Saffil-20%, Al/Saffil-5%/Al2O3(particle type)-15%) showed the similar wear resistance with each other at the same test condition. In the low load & room temperature condition, the wear resistance was improved due to the high hardness of the ceramic reinforcements. As the test load increased, the wear properties were governed by the wear properties of matrix.