• Journal of Technologic Dentistry
• /
• v.19 no.1
• /
• pp.21-35
• /
• 1997

The Ag-Pd-Cu alloys containing a small amount of Au is commonly used for dental purposes, because this alloy is cheaper than Au-base alloys for clinical use. However, the most important characteristic of this alloy is age-hardenability, which is not exhibited by other Ag-base dental alloys. The specimens used were Ag-20Pd-20Cu ternary alloy and Au addition alloy. These alloys were melted and casted by induction electic furace and centrifugal casting machine in Ar atmoshpere. These specimens were solution treated for 2hr at $800^{\circ}C$ and were then quenched into iced water, and aged at $350{\sim}550^{\circ}C$ Age-hardening characteristics of the small Au-containing Ag-pPd-Cu dental alloys were investigated by means of hardness testing, X-ray diffraction and electron microscope observations, electrical resistance, differential scanning calorimetric, emergy dispersed spectra and electron probe microanalysis. Principal results are as follows : Hardening occured in two stages, I. e., stage I in low temperature and stage II in high temperature regions, during continuous aging. The case of hardening in stage I was due to the formation of the Llo type face centered tetragonal PdCu-ordered phase in the grain interior and hardening in stage I was affedted by the Cu concentration. In stage II, decomposition of the $\alpha$ solid solution to a PdCu ordered phase(L1o type) and an Agrich ${\alpha}2$ phase occurred and a discontiunous precipitation occurred at the grain boundary. Form the electron microscope study, it was concluded that the cause of age-hardening in this alloy is the precipitation of the PdCu ordered phase, which has AuCu I type face-centered tetragonal structure. Precipitation procedure was ${\alpha}\to{\alpha}+{\alpha}2+PdCu\to{\alpha}1+{\alpha}2+PdCu$ at Pd/Cu = 1 Ag-Pd-Cu alloy is more effective dental alloy as ageing treatment and is suitable to isothermal ageing at $450^{\circ}C$.

• Tuberculosis and Respiratory Diseases
• /
• v.49 no.2
• /
• pp.169-178
• /
• 2000

Background : Usually fever subsides within one week in over 90% of pulmonary tuberculosis (TBp) patients after the start of short-course anti-tuberculosis therapy, but occasionally it persists over two weeks after treatment. When the fever persists, drug resistance, combined infection, or drug fever, and so on, are considered as an etiology and, in some cases, drugs are changed. But inadvertent discontinuation of a short-course regimen inevitably will extend the duration of treatment, and the treatment completion may be delayed. This study was performed to investigate the causes of prolonged fever (PF) and to identify the predictors of PF in drug-susceptible TBp patients in Korea. Method : Five hundred-ninety-eight patients, who were admitted to Asan Medical Center from January 1996 to March 1999, diagnosed with TBp and prescribed short-course, anti-tuberculosis treatment, were reviewed. PF was defined as having fever over two weeks despite treatment. The causes of PF were analyzed. Drug-sus-ceptible TBp patients who presented no causes for PF, except turberculosis itself, were selected(n=22), and they were compared with those who had no fever at diagnosis (n=22) and those who had fever at diagnosis, which had subsided within two weeks after treatment (n=22). Clinical, laboratory, and radiological parameters were compared among the three groups. Results : Twenty-eight (4.8%) of 598 patients showed PF over two weeks despite short-course treatment. The causes of PF were drug fever (n=2), multi-drug resistant tuberculosis (n=3), disseminated Mycobacterium kansasii infection (n=1), and drug-susceptible tuberculosis itself (n=22). The patients with PF had more risk factors for tuberculosis, long duration of symptoms before treatment, night sweats, weight long, numerous acid fast bacilli on sputum smear, anemia, hyponatremia, hypoalbuminemia, over three lung cavity numbers and extensive infiltration, indicating that they had prolonged and extensive lung diseases. Conclusion : The main cause of PF in TBp despite short-course regimen seems to be drug-susceptible but extensive disease in Korea. Any changes to the drug regiment provided for TBp patients with prolonged fever despite treatment should be carefully considered.

• Management & Information Systems Review
• /
• v.36 no.3
• /
• pp.167-184
• /
• 2017

In this study, we investigated the effect of offline banking trust on smart banking trust. As influencing factors of smart banking trust, this study compared offline banking trust, smart banking's system quality, and information quality. For the empirical study, 186 questionnaire data were collected from smart banking users and the data were analyzed using Smart-PLS 2.0. As results, it was verified that there is trust transfer in FinTech service, by the significant effect of offline banking trust on smart banking trust. And it was proved that the effect of offline banking trust on smart banking trust is lower than that of smart banking itself. The contribution of this study can be seen in both academic and industrial aspects. First, it is the contribution of the academic aspect. Previous studies on banking were focused on either offline banking or smart banking. But this study, focus on the relationship between offline banking and online banking, proved that offline banking trust affects smart banking trust. Next, it is the industrial contribution. This study showed that offline banking characteristics of traditional commercial banks affect the trust of emerging smart banking service. This means that the emerging FinTech companies are not advantageous in the competition of trust building compared to traditional commercial banks. Unlike traditional commercial banks, the emerging FinTech is innovating the convenience of customers by arming them with new technologies such as mobile Internet, social network, cloud technology, and big data. However, these FinTech strengths alone can not guarantee sufficient trust needed for financial transactions, because banking customers do not change a habit or an inertia that they already have during using traditional banks. Therefore, emerging FinTech companies should strive to create destructive value that reflects the connection with various Internet services and the strength of online interaction such as social services, which have an advantage over customer contacts. And emerging FinTech companies should strive to build service trust, focused on young people with low resistance to new services.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.3
• /
• pp.22-31
• /
• 2012

This study was prompted by the recognition that the tenn "Community design" has recently been used in diverse practical fields without prior discussion about its underpinnings, a potentially problematic state of affairs. Based on these problems, this study studied the special quality about the concept of community design. Community design can be discussed from two perspectives. The first views community design as a design that concerns the community, an inhabited area populated with people who have common interests, at least in part because of geographic proximity to each other. The second sees community design as a movement that started in the 1960s and places a great importance on democratic decision making, communication, and collaboration. This study will focus on the latter. This branch of community design encompasses an advocacy planning approach, in which design professionals represent deprived communities in their resistance against comprehensive redevelopment. This was associated to the wider social protest movements of the mid and late 1960s. In the 1970s, this branch of community design was developed alongside community design centers, which provided local-level technical assistance to the communities on a number of issues, such as design and planning. The discussion about community design started in earnest from the early 1980s. A review of the literature m community design reveals several characteristics. First, community design deals with the relationship between the physical environment and several aspects of a region, including the social and cultural. Second, it involves community participation, which many scholars believe is the core of community design. Specifically, community design has been characterized by increased participation and democratic debate and decision making. The Third is about communication methods. Since the 1960s, diverse methods had been developed to promote communication effectively. Finally, community design must consider the relationship between designers, who typically value aesthetics and efficiency of form, and the needs of the community with which they are working. Indeed, some scholars believe that this relationship is generally contentious, although the designer can also be thought of as the facilitator of the community's needs. As community design practice becomes more prevalent, a review of the foundation of institution and policy and the role of experts is also needed. The community design movement bas been theorized ex post facto through diverse discussion that has sought to ascribe meaning and direction to its practice. In other words, the relationship between this theory and practice is cyclical. Therefore, this study can contribute to the virtuous circle.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.2
• /
• pp.21-29
• /
• 2018

This study was wanted to select a value evaluation item to maintain the authenticity of the Planting Landscape in Hahoe and Yangdong villages. Above all, after checking the suitability of the 43 selected items by the Focus Group Interview, the weight was calculated in the Analytic Hierarchy Process expert questionnaire to establish the importance of the indicators for the development of the assessment items. The expert analysis analyzed the importance of 2 sections, 6 divisions and 11 detailed categories, and summarized the results of the study as follows : First, the comparative importance of each category and selection of the assessment items for the stabilization of the Planting Landscape of Hahoe and Yangdong indicated that cultural values are more important than biological values. In particular, details of the biological values of trees were derived with relatively low estimates, except for the specific characteristics of species and items of type of tree. Second, as a result of verification of the suitability of the 43 items selected by the Focus Group Interview, the source diameter, the collection width, reception, flushing, supersonality, records, memorials, 11 items were selected, Third, the results of the importance evaluation of the value properties for maintaining the resistance of vegetation through the Analytic Hierarchy Process were : specific in biological values (0.187), steady (0.094), and water pipe width (2007). There was relatively little difference in the highest weights, the width of the pipe except for the lowest value received, and the source diameter flushing. Fourth, the results of an evaluation of the importance of a value property aimed at historical values were whether or not the cultural asset was designated (0.134), the record value (0.092), the time (0.088), and the monument (0.063). In terms of the importance of evaluating the historical values of Planting sites consisting of Hahoe and Yangdong, the importance of designation of cultural properties was considered to be relative to the maintenance of the Planting Landscape including culture and history. Based on the assessment items and weighted values of the Planting Landscape of Yangdong Village and the World Cultural Heritage below and below, this study's Analytic Hierarchy Process can be applied to actual criteria for the assessment of the authenticity of trees in the village. Based on the assessment items and weighted values of the Planting Landscape in Hahoe and Yangdong villages, a follow-up study on the assessment standards for the authenticity of trees in the village will be left as a future task.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.4
• /
• pp.285-292
• /
• 2017

We investigated physicochemical properties of puffed snacks with intermediate and high amylose rice varieties. The intermediate amylose rice varieties 'Sindongjin' and high amylose rice varieties newly developed for food processing, 'Dodamssal' and 'Goami4' were tested for this study. The crude fat and crude protein contents of the rice cultivars ranged 1.47-3.08% and 6.30-7.63%, respectively. The resistant starch and amylose contents of Dodamssal and Goami4 were higher than those of Sindongjin. The hardness of rice was the highest in Sindongjin and Dodamssal. Also, Hardness of puffed snacks decreased by 72.07% for Sindongjin, 88.21% for Dodamssal and 66.67% for Goami4 compared to raw rice samples. The sensory evaluation showed that the highest scores in taste, texture and overall acceptability of puffed snacks were obtained in Dodamssal. The results of this study indicate that Dodamssal was suitable varieties for puffed snacks. Also, the physicochemical properties of Dodamssal were improved by the extrusion process. Therefore Dodamssal can be used for the industrial production of puffed snacks.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.34 no.1
• /
• pp.26-32
• /
• 2014

'Dahan' (Avena sativa L.), a winter oat cultivar for forage use, was developed by the breeding team at the Department of Rice and Winter Cereal Crop, National Institute Crop Science (NICS), Rural Development Administration (RDA) in 2011. It was derived from an original cross between $F_1$[Sprinter/73625] and 'Gwiri26'. Subsequent generations followed by the cross were handled in bulk and pedigree selection programs at Suwon. A line, 'SO99027-GB-B-113-4-4-3', was selected for cold tolerance and good agronomic characteristics and as a line name of 'Gwiri75'. The line 'Gwiri75' was subsequently evaluated for cold tolerance and forage yield during 3 years in four region such as Yesan, Iksan, Kimjae, and Jeju, from 2009 to 2011 and finally named as 'Dahan'. Though similar in heading date to the check cultivar Samhan, 'Dahan' had tall plant length and lodging resistance. It's average forage dry matter yield harvested at milk-ripe stage was 15.6 ton $ha^{-1}$, compared with 14.1 ton $ha^{-1}$ of check cultivar. Cultivar 'Dahan' was lower to the check cultivar 'Samhan' in protein content (8.4% and 9.9%, respectively), while it was superior to the check cultivar in total digestible nutrients (TDN) (60.8% and 59.3%, respectively), and in TDN yield $ha^{-1}$ (9.5 ton and 8.4 ton, respectively). Fall sowing of 'Dahan' is recommended only in the areas where daily minimum mean temperatures are averaged higher than $-7^{\circ}C$ in January, and excluded in mountain area where frost damage is presumable.

• Korean Journal of Dental Materials
• /
• v.45 no.4
• /
• pp.243-256
• /
• 2018

The purpose of this study was to investigate the effects of the anodization and cyclic calcification treatment on the surface characteristic and bioactivity of the titanium thin sheet in order to obtain basic data for the production of bioactive titanium membrane. A $30{\times}20{\times}0.08mm$ titanium sheets were prepared, and then they were pickled for 10 seconds in the solution which was mixed with $HNO_3:HF:H_2O$ in a ratio of 12: 7: 81. The $TiO_2$ nanotube layer was formed to increase the specific surface area of the titanium, and then the cyclic calcification treatment was performed to induce precipitation of hydroxiapatite by improvement of the bioactivity. The corrosion resistance test, wettability test and immersion test in simulated body solution were conducted to investigate the effect of these surface treatments. The nanotubes formed by the anodization treatment have a dense structure in which small diameter tubes are formed between relatively large diameter tubes, and their inside was hollow and the outer walls were coupled to each other. The hydroxyapatite precipitates were well combined on the nanotubes by the penetration into the nanotube layer by successive cyclic calcification treatment, and the precipitation of hydroxyapatite tended to increase proportionally after immersion in simulated body solution as the number of cycles increased. In conclusion, it was confirmed that induction of precipitation of hydroxyapatite by cyclic calcification treatment after forming the nanotube $TiO_2$ nanotube layer on the surface of the titanium membrane can contribute to improvement of bioactivity.

• Korean Journal of Breeding Science
• /
• v.49 no.2
• /
• pp.80-86
• /
• 2017

'Jungmo2501' (Avena sativa L.), a winter oat for forage use, was developed by the breeding team at the National Institute of Crop Science, RDA in 2010. The following is the characteristics of 'Jungmo2501' that is characterized as light green leaf, yellow brown culm and whitish yellow grain. The heading date of 'Jungmo2501' was about 3 days earlier than that of check cultivar 'Samhan'(May 7 and May 10, respectively). Its plant height was 11 cm longer than 103 cm of the check, and the leaf blade ratio of aerial parts was 26 % higher than the check (11.8% and 9.4%, respectively). The cold tolerance, resistance to lodging and wet injury of 'Jungmo2501' were similar to those of the check. The average forage dry matter yield of 'Jungmo2501' harvested at milk-ripe stage was 5% higher than the check ($15.5ton\;ha^{-1}$ and $14.7ton\;ha^{-1}$, respectively). 'Jungmo2501' was higher than the check in terms of protein content (6.6% and 5.9%, respectively), neutral detergent fiber (58.5% and 57.6%, respectively), and acid detergent fiber (34.5% and 32.1%, respectively), while total digestible nutrients was lower than the check (61.6% and 63.6%, respectively), and TDN yield was $0.37ton\;ha^{-1}$ more than that of the check ($9.71ton\;ha^{-1}$ and $9.34ton\;ha^{-1}$, respectively). The silage grade of 'Jungmo2501' estimated by Flig score showed level II, meaning good quality. Fall sowing cropping of 'Jungmo2501' is recommended only for areas where average daily minimum mean temperatures in January are higher than $-6^{\circ}C$.

• Korean Journal of Breeding Science
• /
• v.43 no.6
• /
• pp.611-615
• /
• 2011

'Manjong' is a new japonica rice cultivar developed in 2009 derived from a cross between 'Yeongdeog34' and 'Nampyeongbyeo' at the Department of Functional Crop, NICS, RDA. This cultivar is suitable for the double cropping system after the cash crop cultivation. Heading date of 'Manjong' is later than 'Keumobyeo' under the late transplanting cultivation on July 10. It has high grain fertility under cold conditions and low premature heading. One of the distinguishing characteristics of this variety is its resistance to major diseases like leaf blast and rice stripe virus disease. However, it shows susceptibility to major insect pests and bacterial blight disease. Milled rice kernels are translucent with non-glutinous endosperm and have 7.2% protein and 18.7% amylose contents. Ripening ratio and head rice ratio is very higher than those of 'Keumobyeo'. The palatability of cooked rice is also better than 'Keumobyeo'. The milled rice yield of 'Manjong' in local adaptability tests after harvest of the cash crop is $4.81MT\;ha^{-1}$. This cultivar is suitable for planting in the plain paddy fields of Honam and Yeonnam regions in Korea.