• 센서학회지
• /
• 제32권4호
• /
• pp.252-256
• /
• 2023

A one-step method for nanoscale patterning of silver ionic ink on a substrate is developed using a microscale, elastic mold deformation. This method yields unique micro/nanoscale metallic structures that differ from those produced using the original molds. The linewidth of these metallic structures is significantly reduced (approximately 10 times) through the sidewall deformation of the original mold cavity on a thin liquid film, as verified by finite element analysis. The process facilitates the fabrication of various, isolated and complex micro/nanoscale metallic structures with negligible residual layers at low cost and high throughput. These structures can be utilized for various applications, including optoelectronics, wearable sensors, and metaverse-related devices. Our approach offers a promising tool for manipulation and fabrication of micro/nanoscale structures of various functional materials.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Pre-symposium of the 10th ISWPC Recent Advances in Paper Science and Technology
• /
• pp.361-365
• /
• 1999

This study examined the effects of multiple recycling on deinkability and properties of recycled paper from laser computer printout (LCPO). First, alkaline paper with a 20% printed area was disintegrated by TAPPI standard disintegrator at room temperature. After dewatering, the pulp was flotated and dried in oven at80$^{\circ}C$ for 24 hrs. A sequence of wetting, disintegrating, flotating and drying was one recycling cycle and this cyclic treatment was repeated from zero to five times. The recycled handsheet dropped to 90% of the original brightness after five cycles, and lost the most brightness after five cycles, and lost the most brightness in the first two cycles. However, it had a gain of 10% in opacity after five cycles as the same as the case of nonprinting. And, in this study, the method for determining residual ink(toner) content in recycled handsheets ere established by means of SEM-EDX and Py-GC. The change of residual ink percentage on recycled paper showed the effect of recycling numbers on deinkability of waste paper. A slight decrease in deinkability was noted for the recycled handsheets, which may be due to the change of fiber surface free energy connected with fiber swelling.

• 자원리싸이클링
• /
• 제21권5호
• /
• pp.44-49
• /
• 2012

재생률이 높은 폐신문지(old newspaper, ONP)를 부유선별법을 이용하여 탈묵을 진행하였을 시, 해리시간, 초음파처리에 따른 백색도, 잔류잉크농도(effective residual ink concentration, ERIC), 수율의 효과를 규명하였다. 또한 부유선별시 pH, 포수제에 따른 백색도, ERIC과 수율의 효과도 규명하였다. 해리시간이 증가할수록 백색도와 ERIC이 증가함을 보였으나 수율의 차이는 없었다. 해리시간이 30분일 때 백색도 58% ERIC 182.9 ppm이였고, 해리를 더 진행하더라도 백색도의 증가를 볼 수 없었다. 단 해리 된 ONP를 초음파발생장치를 이용하여 초음파처리를 했을 경우 단 2분의 해리시간으로도 58%이상의 백색도를 얻을 수 있었다. 초음파처리를 20분간하고, pH 11에서 포수제로 등유을 사용했을 때 백색도가 59.32%로 가장 높았다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 춘계학술발표논문집
• /
• pp.167-173
• /
• 2006

Deinking is a series of unit operations designed to detach ink from cellulose fibers and separate the dispersed ink from the pulp slurry. Deinking chemicals are process aids that enable expensive mill equipment used in these unit operations to operate more efficiently - often much more efficiently. We propose the blended deinking agent with cellulolutic enzymes and synthetic collector in deinking pulp of conventional alkaline method. The deinking efficiency of old news print in alkaline pH was enhanced with enzyme treatments. The brightness of deinked pulp was increased with less residual ink particles and yield of enzymatic deinked pulp was improved compared to the deinked pulp of conventional alkaline method. Enzymes in biomass were use to Chemical Deinking for reduce environment pollution through surfactant and improve surfactants. examining into compatibility Enzymes and surfactants, these new materials are studied efficiency of deinking efficiency.

• 한국포장학회지
• /
• 제12권2호
• /
• pp.91-96
• /
• 2006

The widespread use of packaging materials on food packages sometimes causes off-flavor and deterioration in the food by migration of packaging materials which consist of mainly plastic materials and printing ink solvents. Even though migration of the residual packaging materials does not generally cause safety problems in the contained food, it certainly can generate off-flavor and finally deteriorate quality of the finished product. In highly consumer-oriented markets, quality of the finished product is gaining more importance economically, so profound and thorough study about migration into food to maintain the fine quality of the end product becomes an importance issue. Studies have been conducted about migration of various packaging materials and the chemical reactions between the food components and the materials used for food packaging (Brody, 1989; Mcneal and Breder, 1987; Lawson, G and Lawson, C, 1996). Several of these studies have measured partition coefficient values (Kp) between packaging materials and various food samples and involved finding factors that affected the partitioning behavior of packaging materials into the contained food. However, to enable prediction of partitioning, data are still needed on the relation of packaging material chemical structure and properties to partitioning behavior, and on the partitioning behavior of various food ingredients and the total food compositions.

• 펄프종이기술
• /
• 제29권4호
• /
• pp.36-44
• /
• 1997

This experiment was mainly performed with a mechanical treatment using ultrasound. We got the following conclusions : At seven minutes-ultrasonic treatment using nonionic surfactant, yield, brightness and residual ink contents were superior to other treatment, but several strength properties were decreased. On the other hand anionic surfactant was considerably low ink removal efficiency. For ultrasonic treatment using nonionic surfactant, yield and brightness were dropped when temperature was over 4$0^{\circ}C$, but were observed to be insensitive to the pulp consistency and flotation time. In the case of nonionic surfactant, tensile and burst strength were improved when ultrasonic treatment was used comparing to non-treatment, and nonionic surfactant was generally better than anionic surfactant in terms of tensile and burst strength regardless of ultrasound conditions. Several properties were decreased when anionic surfactant was used in comparison with nonionic surfactant except yield, therefore, anionic surfactant. was not proper to be used in this condition.

• 문화기술의 융합
• /
• 제8권2호
• /
• pp.337-342
• /
• 2022

최근 프린팅 기술은 디스플레이나 연료전지를 포함한 IT 분야에 폭넓게 사용되고 있지만 핵심 부품인 프린터 헤드의 박막을 적층하는 제조공정에서 발생하는 잔류응력 및 열응력으로 인해 기판이 변형되거나 노즐층이 파손되어 잉크가 새거나 원하는 영역으로 토출되지 않는 문제가 발생하고 있다. 따라서 본 논문에서는 보다 견고하고 신뢰할수 있는 구조를 가진 열전사 잉크젯 프린트 헤드 형상을 제안하고자 한다. 기판과 노즐층의 변형을 줄이기 위해 리브, 기둥, 지지벽 및 개별 피드홀과 같은 다양한 형태의 잉크젯 프린트 헤드 구조가 설계되었으며, FEA 해석을 통해 타당성을 검증하였다. 해석 결과 헤드의 최대 응력 및 노즐층 변형이 최소 40~50%로 급격히 감소하였으며 기둥 및 지지벽 형태의 프린터 헤드를 제작하여 노즐층 변형에 의한 균열 및 잉크 누출이 없는 것을 확인하였다. 따라서 제안된 헤드 형상이 정상 방향의 잉크 토출에 기여하며 대면적 프린팅 기술에도 적용될 수 있을 것으로 기대된다.

• 한국음향학회지
• /
• 제21권5호
• /
• pp.494-502
• /
• 2002

본 연구는 실측 잔향음 자료에서 나타나는 단주기적 시변동성 신호 간섭 (interference)을 억제하기 위해 Ecart-Young 이론을 토대로 자료 행렬로부터 낮은 계수를 추출하여 근사화하는 낮은 계수 근사법 (LRA: Low Rank Approximation) 기법을 제안하였다. 이 기법을 실측 자료에 적용한 결과, 잔향음 신호와 시변동성 신호가 분리되었으며 이때 적절한 낮은 계수를 추출키 위해서 특이치 분해법 (SVD: Singular Value Decomposition)이 사용되었다. 잔향음 신호의 억제는 LRA를 통해 얻어진 근사치와 실측치 사이의 잔차를 계산함으로써 수행하였으며 결과적으로 LRA을 이용하여 시간적으로 안정적인 잔향음 신호를 획득함으로써 능동 소오나 시스템 운용 및 잔향음 모델링시 적용 가능성을 제시하였다.

• 펄프종이기술
• /
• 제31권5호
• /
• pp.18-23
• /
• 1999

This study examined the effects of multiple recycling on deinkability and properties of recycled paper from laser computer printout(LCPO). First, alkaline paper with a 20% printed area was disintegrated by TAPPI standard disintegrator. After dewatering , the pulp was followed by flotation, handsheet making, and drying at room temperature, in order. A sequence of printing , disintegrating, flotating , handsheet making and drying was one recycling cycle and this cyclic treatment was repeateed from zero to five times. The residual ink content in recycled handsheets by SEM-EDXA and Py-GC analyseswas increased slightly as recycling number increase. After five cycles of recycling the ISO brightness of recycled handsheets dropped to about 90% of the original brightness. However, it had a gain of 10% in opacity. The most of physical properties of recycled handsheets were decreased as recycling numbers increase except of for tear strength.

• 문화기술의 융합
• /
• 제9권5호
• /
• pp.529-534
• /
• 2023

고속 및 대면적 인쇄를 위한 라인 프린팅 기술은 늘어난 헤드 길이만큼 헤드 내부로 잉크를 공급하는 유로를 확보해야 하는 구조적 취약점과 제조 과정에서 발생하는 잔류응력에 의한 피드홀 변형으로 인해 노즐층이 파손되거나 잉크가 누출되는 결함이 있다. 따라서 본 논문에서는 견고하고 신뢰할 수 있으며 라인 프린팅 방식에 보다 적합한 열전사 방식의 잉크젯 프린트 헤드 형상을 제안하고자 한다. 먼저 실험을 통해 초기 라인 프린팅 헤드의 변형량을 측정한 후 이를 등가의 하중량으로 변환하였으며 FEA 해석을 통해 하중 추정 방법의 타당성을 검증하였다. 또한 헤드 크기를 증가시키지 않으면서 변형을 최소화할 수 있도록 기둥이나 지지벽으로 단위 노즐을 보강하거나 지지빔이나 건/습식각된 브릿지를 추가하여 내부 강성을 증가시킨 헤드 구조를 설계하였으며, 피드홀 변형이 최대 90% 감소하는 것을 확인하였다. 제안된 형상 중 공정 편의성과 제작비용을 고려하여 건식각된 피드홀 브릿지 형태의 헤드를 선정하였으며 실제 제작을 통해 노즐층 변형이나 잉크 누출 없이 정상 작동하는 것을 확인하였다.